GRBL 3-axis mill/router post processor for Stable Design SheetCam TNG
Post processor is tested with SheetCam TNG V6.0.30
G28 safe postion is ON
Tool change M6 commands is ON
Line numbering is ON
Always check generated G-code before sending it to your mill/router!
BEWARE: first toolchange position is explicitly specified at SafeZ height
N00001 G17
N00002 G21
N00003 G94
N00004 G28 G91 Z0
N00005 G90
N00006 G0 X0.000 Y0.000
N00007 Z6.000
N00008 ( MSG, 2.5*10mm 1/8inSHNK 6F KUKURUZA )
N00009 T384 M6
N00010 G0 Z6.000
N00011 M3 S6000
N00012 G0 X-2.275 Y0.214
N00013 Z2.000
N00014 G1 Z0.750 F50
N00015 G2 X2.233 Y0.600 I2.448 J-2.061 F720
N00016 G3 X3.876 Y0.001 I1.643 J1.951
N00017 G1 X97.980
N00018 G3 X100.464 Y1.972 I0.000 J2.550
N00019 G1 X102.900 Y12.432
...
N00380 G2 X3.135 Y-3.297 I-2.061 J-2.448
N00381 G0 Z6.000
N00382 M5
N00383 G28 G91 Z0
N00384 G28 G91 X0 Y0
N00385 M30