minor changes, just syncing

docs/docs/Gear Up/edison.md

@@ -137,9 +137,9 @@ There are 4 types of Edison's. All of them work, but Versions 3 and 4 require an
 
   * You may need to hunt for an Edison as supplies of them are dwindling - if you get it as part of a "kit" (i.e. breakoutboard + Edison), keep in mind _you'll still need to get the Explorer Board Block from Hamshield_.
 
-  * **Note:** If you are doing Option 1 (an Edison from wherever you can find it) - you are getting an UNFLASHED Edison. Not a big deal - flashing it with jubilinux is just a few more steps (~15 minutes) - but remember you'll need to start with the flashing instructions. Follow the steps for flashing on (a) [all-computers page](http://openaps.readthedocs.io/en/latest/docs/Resources/Edison-Flashing/all-computers-flash.html) (with the most comprehensive [troubleshooting section](http://openaps.readthedocs.io/en/latest/docs/Resources/Edison-Flashing/all-computers-flash.html#troubleshooting)); b) the [Mac-specific flashing page](http://openaps.readthedocs.io/en/latest/docs/Resources/Edison-Flashing/mac-flash.html); or c) the [Windows-specific flashing page](http://openaps.readthedocs.io/en/latest/docs/Resources/Edison-Flashing/PC-flash.html)), but stop before installing wifi and other steps and instead jump over to the "[Install OpenAPS](http://openaps.readthedocs.io/en/latest/docs/Build%20Your%20Rig/OpenAPS-install.html)" page from there. 
+  * **Note:** If you are doing Option 1 (an Edison from wherever you can find it) - you are getting an UNFLASHED Edison. Not a big deal - flashing it with jubilinux is just a few more steps (~15 minutes) - but remember you'll need to start with the flashing instructions. Follow the [steps for flashing](http://openaps.readthedocs.io/en/latest/docs/Resources/Edison-Flashing/all-computers-flash.html). 
 
-* Option 2 - (previously [buy an Edison that is already flashed with jublinux when supplies were available](https://enhanced-radio-devices.myshopify.com/products/intel-edison-w-jubilinux). If you get a pre-flashed Edison, you can start [installing and setup OpenAPS](http://openaps.readthedocs.io/en/latest/docs/Build%20Your%20Rig/OpenAPS-install.html). (You would not need to "flash" the Edison). 
+* Option 2 - (previously [buy an Edison that is already flashed with jublinux when supplies were available](https://enhanced-radio-devices.myshopify.com/products/intel-edison-w-jubilinux). If you get a pre-flashed Edison, you can start with [step 2](http://openaps.readthedocs.io/en/latest/docs/Build%20Your%20Rig/OpenAPS-install.html).
 
 ### Lithium-ion polymer (LiPo) battery or other battery supply
 

docs/docs/While You Wait For Gear/monitoring-OpenAPS.md

@@ -88,6 +88,8 @@ See below for different ways to access your rig:
 
 **Access to the rig will need a cable to connect the UART port on the rig with the USB port on the computer.  You will need a cable capable of transmitting data.  If you try all of the steps below and are unsuccessful at connecting, try a new cable.**
 
+You should have changed your rig's root password during setup; if not, please [go back and do so now](../Build Your Rig/step-1-flashing). The default password is most likely "edison" without quotes, but check the slip of paper that might have come with your pre-flashed Edison.
+
 #### For Mac computers
 
 * Use the Terminal app on the Mac, or follow [these directions for Windows](http://openaps.readthedocs.io/en/latest/docs/Resources/Edison-Flashing/all-computers-flash.html#if-you-re-using-a-windows-pc-for-console)
@@ -96,7 +98,7 @@ See below for different ways to access your rig:
 
 ![Mac Screen first password](../Images/access_mac_password.png)
 
-* You may see a blank screen.  Press RETURN to bring up the edison’s login screen.  Login as `root` and use your root password (you should have changed it from the default of `edison` during the setup of the rig - if not, please [go back and do so now](http://openaps.readthedocs.io/en/latest/docs/Resources/Edison-Flashing/all-computers-flash.html#initial-edison-setup).  A successful login will look like below.
+* You may see a blank screen.  Press RETURN to bring up the edison’s login screen.  Login as `root` and use your root password (you should have changed it from the default of `edison` during the setup of the rig - if not, please [go back and do so now](../Build Your Rig/step-1-flashing).  A successful login will look like below.
 
 ![Mac Screen successful login](../Images/access_mac_screen.png)
 

docs/index.rst

@@ -24,7 +24,7 @@ This documentation supports a self-driven Do-It-Yourself (DIY) implementation of
    :glob:
    :hidden:
 
-   Understanding OpenAPS (Overview) <docs/Understanding OpenAPS-Overview/index>
+   Overview: Understanding OpenAPS <docs/Understanding OpenAPS-Overview/index>
 
    Gear Up <docs/Gear Up/index>