Skip to content

Commit

Permalink
Merge 6db9043 into 99fa03f
Browse files Browse the repository at this point in the history
  • Loading branch information
@acutaia
acutaia committed May 7, 2019
2 parents 99fa03f + 6db9043 commit 0bfea32
Show file tree
Hide file tree
Showing 4 changed files with 372 additions and 2 deletions.
145 changes: 145 additions & 0 deletions SUPPORTED_PROFILES.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -2,6 +2,15 @@
All profiles (should) correspond to the official [EEP](http://www.enocean-alliance.org/eep/) by EnOcean.

### RPS Telegram (0xF6)
##### RORG 0xF6 - FUNC 0x01 - TYPE 0x01 - Push Button

|shortcut|description |type |values |
|--------|--------------------------------------------------|--------|---- |
|PB |Status of the push button |enum |0 - Released |
| | | |1 - Pressed |



##### RORG 0xF6 - FUNC 0x02 - TYPE 0x02 - Light and Blind Control - Application Style 2

|shortcut|description |type |values |
Expand Down Expand Up @@ -300,6 +309,37 @@ All profiles (should) correspond to the official [EEP](http://www.enocean-allian
|TMP |Temperature (linear) |value |255.0-0.0 ↔ 0.0-40.0 °C |


##### RORG 0xA5 - FUNC 0x10 - TYPE 0x05 - Temperature Sensor, Set Point and Occupancy Control

|shortcut|description |type |values |
|--------|--------------------------------------------------|--------|---- |
|SP |Set Point (linear) |value |0.0-255.0 ↔ 0.0-255.0 % |
|TMP |Temperature (linear) |value |255.0-0.0 ↔ 0.0-40.0 °C |
|OCC |Occupancy Button |enum |0 - Button pressed |
| | | |1 - Button released |


##### RORG 0xA5 - FUNC 0x10 - TYPE 0x06 - Temperature Sensor, Set Point and Day/Night Control

|shortcut|description |type |values |
|--------|--------------------------------------------------|--------|---- |
|SP |Set Point (linear) |value |0.0-255.0 ↔ 0.0-255.0 % |
|TMP |Temperature (linear) |value |255.0-0.0 ↔ 0.0-40.0 °C |
|SLSW |Slide switch |enum |0 - Position I / Night / Off |
| | | |1 - Position O / Day / On |


##### RORG 0xA5 - FUNC 0x10 - TYPE 0x10 - Temperature and Humidity Sensor, Set Point and Occupancy Control

|shortcut|description |type |values |
|--------|--------------------------------------------------|--------|---- |
|SP |Set Point (linear) |value |0.0-255.0 ↔ 0.0-255.0 |
|HUM |Rel. Humidity (linear) |value |0.0-250.0 ↔ 0.0-100.0 % |
|TMP |Temperature (linear) |value |0.0-250.0 ↔ 0.0-40.0 °C |
|OCC |Occupancy Button |enum |0 - Button pressed |
| | | |1 - Button released |


##### RORG 0xA5 - FUNC 0x10 - TYPE 0x12 - Temperature and Humidity Sensor and Set Point

|shortcut|description |type |values |
Expand Down Expand Up @@ -497,14 +537,119 @@ All profiles (should) correspond to the official [EEP](http://www.enocean-allian
| | | |2 - Dim to new output level - dim timer 2 |
| | | |3 - Dim to new output level - dim timer 3 |
| | | |4 - Stop dimming |
| | | |5-7 - Not used |
|IO |I/O channel |enum |0-29 - Output channel {value} (to load) |
| | | |30 - All output channels supported by the device |
| | | |31 - Input channel (from mains supply) |
|OV |Output value |enum |0 - Output value 0% or OFF |
| | | |1-100 - Output value {value}% or ON |
| | | |101-126 - Not used |
| | | |127 - output value not valid / not set |


##### RORG 0xD2 - FUNC 0x01 - TYPE 0x09 - Electronic switch with Local Control

###### command: 1
|shortcut|description |type |values |
|--------|--------------------------------------------------|--------|---- |
|CMD |command identifier |enum |0-13 - Command ID {value} |
|DV |Dim value |enum |0 - Switch to new output value |
| | | |1 - Dim to new output level - dim timer 1 |
| | | |2 - Dim to new output level - dim timer 2 |
| | | |3 - Dim to new output level - dim timer 3 |
| | | |4 - Stop dimming |
| | | |5-7 - Not used |
|IO |I/O channel |enum |0-29 - Output channel {value} (to load) |
| | | |30 - All output channels supported by the device |
| | | |31 - Input channel (from mains supply) |
|OV |Output value |enum |0 - Output value 0% or OFF |
| | | |1-100 - Output value {value}% or ON |
| | | |101-126 - Not used |
| | | |127 - Output value not valid / not set |

###### command: 3
|shortcut|description |type |values |
|--------|--------------------------------------------------|--------|---- |
|CMD |command identifier |enum |0-13 - Command ID {value} |
|IO |I/O channel |enum |0-29 - Output channel {value} (to load) |
| | | |30 - All output channels supported by the device |
| | | |31 - Input channel (from mains supply) |

###### command: 4
|shortcut|description |type |values |
|--------|--------------------------------------------------|--------|---- |
|PF |Power Failure |enum |0 - Power Failure Detection disabled/not supported |
| | | |1 - Power Failure Detection enabled |
|PFD |Power Failure Detection |enum |0 - Power Failure Detection not detected/not supported/disabled |
| | | |1 - Power Failure Detection Detected |
|CMD |command identifier |enum |0-13 - Command ID {value} |
|OC |Over current switch off |enum |0 - Over current switch off: ready / not supported |
| | | |1 - Over current switch off: executed |
|EL |Error level |enum |0 - Error level 0: hardware OK |
| | | |1 - Error level 1: hardware warning |
| | | |2 - Error level 2: hardware failure |
| | | |3 - Error level not supported |
|IO |I/O channel |enum |0-29 - Output channel {value} (to load) |
| | | |30 - Not applicable, do not use |
| | | |31 - Input channel (from mains supply) |
|LC |Local control |enum |0 - Local control disabled / not supported |
| | | |1 - Local control enabled |
|OV |Output value |enum |0 - Output value 0% or OFF |
| | | |1-100 - Output value {value}% or ON |
| | | |101-126 - Not used |
| | | |127 - output value not valid / not set |

###### command: 5
|shortcut|description |type |values |
|--------|--------------------------------------------------|--------|---- |
|CMD |command identifier |enum |0-13 - Command ID {value} |
|RM |Report measurement |enum |0 - Report measurement: query only |
| | | |1 - Report measurement: query / auto reporting |
|RE |Reset measurement |enum |0 - Report measurement: not active |
| | | |1 - Report measurement: trigger signal |
|e/p |Measurement mode |enum |0 - Energy measurement |
| | | |1 - Power measurement |
|IO |I/O channel |enum |0-29 - Output channel {value} (to load) |
| | | |30 - All output channels supported by the device |
| | | |31 - Input channel (from mains supply) |
|MD_LSB |Measurement delta to be reported(LSB) |enum |0-4095 - N/A |
|UN |Unit |enum |0 - Energy[Ws] |
| | | |1 - Energy[Wh] |
| | | |2 - Energy[KWh] |
| | | |3 - Power[W] |
| | | |4 - Power[KW] |
| | | |5-7 - Not used |
|MD_MSB |Measurement delta to be reported(MSB) |enum |0-4095 - N/A |
|MAT |Maximum time between two subsequent actuator messages|enum |1-255 - Measurement Response messages[10s] |
| | | |0 - Reserved |
|MIT |Minimum time between two subsequent actuator messages|enum |1-255 - Measurement Response messages[s] |
| | | |0 - Reserved |

###### command: 6
|shortcut|description |type |values |
|--------|--------------------------------------------------|--------|---- |
|CMD |command identifier |enum |0-13 - Command ID {value} |
|qu |Query |enum |0 - Query energy |
| | | |1 - Query power |
|IO |I/O channel |enum |0-29 - Output channel {value} (to load) |
| | | |30 - All output channels supported by the device |
| | | |31 - Input channel (from mains supply) |

###### command: 7
|shortcut|description |type |values |
|--------|--------------------------------------------------|--------|---- |
|CMD |command indentifier |enum |0-13 - Command ID {value} |
|UN |Unit |enum |0 - Energy[Ws] |
| | | |1 - Energy[Wh] |
| | | |2 - Energy[KWh] |
| | | |3 - Power[W] |
| | | |4 - Power[KW] |
| | | |5-7 - Not used |
|IO |I/O channel |enum |0-29 - Output channel {value} (to load) |
| | | |30 - Not applicable, do not use |
| | | |31 - Input channel (from mains supply) |
|MV |Measurement value(4 bytes) |enum |0-4294967295 - DB3 = MSB / DB0 = LSB |



##### RORG 0xD2 - FUNC 0x05 - TYPE 0x00 - Type 0x00
Expand Down

0 comments on commit 0bfea32

Please sign in to comment.