added project 8BitMixtape

[GaudiLabs]

tried to add our project 8BitMixTape Nextlevel edition. Not very experienced with the workflow. Hope it works. Best, Urs

[kasbah]

Thanks Urs, the workflow is a bit odd for sure and I am working on improving it.

Here is a preview of your page: http://8bit-mixtape.preview.kitnic.it/boards/github.com/8BitMixtape/NextLevelEdition/

Looks like the renderer had some problems with the board outline, I'll take a look at that.

[GaudiLabs]

Hi Kaspar

Thanks for putting it up. The gerber preview is somehow broken. When I
render the gerber files on http://svgerber.cousins.io/ all looks fine.
(I have other KiCAD gerbers that don't render in this engine though).
Maybe you can correct that or try an other engine. I saw you will
present the platform at oshcamp2016. Nice. Hope to put up more designs
later.

Urs

On 07/21/2016 05:07 PM, Kaspar Emanuel wrote:

Thanks Urs, the workflow is a bit odd for sure and I am working on
improving it.

Here is a preview of your page:
http://8bit-mixtape.preview.kitnic.it/boards/github.com/8BitMixtape/NextLevelEdition/

Looks like the renderer had some problems with the board outline, I'll
take a look at that.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
#81 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/AD7e8mU_WxRXgS6A-IgiYcuK3IB1eAhSks5qX4sogaJpZM4JRpZU.

========= GaudiLabs =========
Urs Gaudenz
Email: urs@gaudi.ch
Mobile: +41 76 480 1772

Neustadtstrasse 7
CH-6003 Luzern
Switzerland

www.gaudi.ch

www.facebook.com/mrgaudi

[kasbah]

Yes, working on it. I linked in an issue that you might not have seen on email: tracespace/tracespace#20

Oshcamp should be great! Thanks so much for working on adding your designs, looking forward to fixing this one and adding more.

[kasbah]

Ah also, would you be able to share the Eagle CAM job script you use to plot the gerbers?

[GaudiLabs]

Hi Kaspar

I use the cam file from seeedstudio (attached) to do the export (with
the cam processor). I this what you need.

Urs

On 07/21/2016 07:48 PM, Kaspar Emanuel wrote:

Ah also, would you be able to share the Eagle ULP you use to plot the
gerbers?

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
#81 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/AD7e8uTKRY88-pYoRM8jbGFS3jKGYYlmks5qX7DagaJpZM4JRpZU.

========= GaudiLabs =========
Urs Gaudenz
Email: urs@gaudi.ch
Mobile: +41 76 480 1772

Neustadtstrasse 7
CH-6003 Luzern
Switzerland

www.gaudi.ch

www.facebook.com/mrgaudi

[CAM Processor Job]
Description[de]="Erzeugt Extended-Gerber-Format (RS274X)

\nDieser CAM-Job besteht aus fünf Arbeitsschritten und erzeugt Fertigungsdaten für eine zweilagige Platine.

\nDie fünf Gerberdateien enthalten Daten für:
\nBestückungsseite *.cmp
\nLötseite *.sol
\nBestückungsdruck oben *.plc
\nLötstoplack Bestückungsseite *.stc
\nLötstoplack Lötseite *.sts
"
Description[en]="Seeed Studio 2-layer PCB Gerber Generator
\nYou will get 10 RS274-x format gerber files:

\n\nTop Layer: pcbname.GTL
\nSilk Top: pcbname.GTO
\nSolderMask Top: pcbname.GTS
\nSMD paste Top: pcbname.GTP

\n\nBottom Layer: pcbname.GBL
\nSilk Bottom: pcbname.GBO
\nSolderMask Bottom: pcbname.GBS
\nSMD paste Bottom: pcbname.GBP

\n\nSolt Drills/Hole: pcbname.GML ---> the Milling Layer(layer46)
\nNC Drill file:pcbname.TXT

\n\nIt works well with our Fusion PCB Service:
\nhttp://www.seeedstudio.com/depot/index.php?main_page=advanced_search_result&search_in_description=1&keyword=Fusion\n\n\n"
Description[zh]="Seeed Studio Gerber Generater

\nThis CAM job consists of 10 sections that generate data for a two layer board.

\nYou will get 10 gerber files that contain data for:
\nTop trace layer *.GTL
\nTop slikscreen layer *.GTO
\nTop pad paste layer *.GTP
\nTop solder mask layer *.GTS
\nBottom trace layer *.GBL
\nBottom slikscreen layer *.GBO
\nBottom pad paste layer *.GBP
\nBottom solder mask layer *.GBS
\nSlot data *.GML
\nNC Drills *.TXT
\n"
Section=Sec_1
Section=Sec_2
Section=Sec_3
Section=Sec_4
Section=Sec_5
Section=Sec_6
Section=Sec_7
Section=Sec_8
Section=Sec_9
Section=Sec_10

[Sec_1]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Drills&Holes"
Name[zh]="drill data"
Prompt=""
Device="EXCELLON"
Wheel=""
Rack=""
Scale=1
Output="%N.TXT"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 44 45"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_2]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Slot drills/holes"
Name[zh]="edge milling"
Prompt=""
Device="GERBER_RS274X"
Wheel=""
Rack=""
Scale=1
Output="%N.GML"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 46"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_3]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Solder paste bottom"
Name[zh]="padmask bottom"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%N.GBP"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 32"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_4]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Solder paste top"
Name[zh]="padmask top"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%N.GTP"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 31"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_5]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Solder Mask bottom"
Name[zh]="solder mask bottom"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%N.GBS"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 30"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_6]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Solder Mask top"
Name[zh]="solder mask top"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%N.GTS"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 29"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_7]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Silk bottom"
Name[zh]="silk bottom"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%N.GBO"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 22 26"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_8]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Silk top"
Name[zh]="silk top"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%N.GTO"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 20 21 25"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_9]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Bottom layer"
Name[zh]="bottom copper"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%N.GBL"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 16 17 18 20"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[Sec_10]
Name[de]="Lötstopmaske Lötseite"
Name[en]="Top Layer"
Name[zh]="top copper"
Prompt=""
Device="GERBER_RS274X"
Wheel=".whl"
Rack=""
Scale=1
Output="%N.GTL"
Flags="0 0 0 1 0 1 1"
Emulate="0"
Offset="0.0mil 0.0mil"
Sheet=1
Tolerance="0 0 0 0 0 0"
Pen="0.0mil 0"
Page="12000.0mil 8000.0mil"
Layers=" 1 17 18 20"
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0"

[kasbah]

I opened a pull request to fix this: 8BitMixtape/NextLevelEdition#1

[kasbah]

I am merging this in as is because we are now using a higher threshold to fill gaps and the board renders correctly.

[kasbah]

This is now live at: https://kitnic.it/boards/github.com/8BitMixtape/NextLevelEdition/

Thanks for registering!

[kasbah]

Hey @GaudiLabs, I am running a promotion where when people add their projects to Kitnic they get free PCB service from Dangerous Prototypes. Let me know if you would like to take advantage of that.

[GaudiLabs]

Hi Kaspar

Sure. I have just another project that is almost ready to be put on
Kitnic. I use PCBWay as PCB service now and I am quite happy with them.
They also offer discount for promoting their service (what can maybe
apply to your promotion). And I am also happy to try out Dangerous
Prototypes.

Best,
Urs

On 08/09/2016 02:00 PM, Kaspar Emanuel wrote:

Hey @GaudiLabs https://github.com/GaudiLabs, I am running a
promotion where when people add their projects to Kitnic they get free
PCB service from Dangerous Prototypes. Let me know if you would like
to take advantage of that.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
#81 (comment),
or mute the thread
https://github.com/notifications/unsubscribe-auth/AD7e8lX2F9gffGTuT8hl2ymHenhPsvnHks5qeGvFgaJpZM4JRpZU.

========= GaudiLabs =========
Urs Gaudenz
Email: urs@gaudi.ch
Mobile: +41 76 480 1772

Neustadtstrasse 7
CH-6003 Luzern
Switzerland

www.gaudi.ch

www.facebook.com/mrgaudi

[kasbah]

Ok, voucher is on it's way. I think I'll run a few of these promotions with different services. Right now DP was the easiest because they already have a voucher system set up.

[kasbah]

Urs, I need an email address for you, or should I send the voucher via Twitter PM?

[GaudiLabs]

Hi Kaspar

This is my mail.
Thanks,
Urs

On August 9, 2016 6:34:51 PM GMT+02:00, Kaspar Emanuel notifications@github.com wrote:

Urs, I need an email address for you, or should I send the voucher via
Twitter PM?

---

You are receiving this because you were mentioned.
Reply to this email directly or view it on GitHub:
#81 (comment)

Sent from my Android device with K-9 Mail. Please excuse my brevity.

[kasbah]

Yes, but I am writing to you via GitHub. I can't see your email address.

[GaudiLabs]

ah sorry, [email removed] is my address.
Urs

On August 10, 2016 12:15:01 AM GMT+02:00, Kaspar Emanuel notifications@github.com wrote:

Yes, but I am writing to you via GitHub. I can't see your email
address.

---

You are receiving this because you were mentioned.
Reply to this email directly or view it on GitHub:
#81 (comment)

Sent from my Android device with K-9 Mail. Please excuse my brevity.

[kasbah]

Cool, code has been sent.