DIY micro BlockClock with the basic m5stack device
Step 1) Follow this guide using M5Burner to flash the UIFlow firmware to your device.
Step 2) Ensure your device is connected to the IDE via WiFi before proceeding. If it is not connected, you will not be able to upload the code and images. You will need to reset the device in order for the IDE to detect the device.
Step 3) Upload the micropython code to the UIFlow IDE. To do this, open the blockclock_v0.5.py file in a text editor, and then copy and paste the code into UIFlow under the "Python" tab.
Step 4) Insert your WiFi SSID beside wlan_AP = and your WiFi password beside wlan_PW = in the code before flashing the device.
Step 5) Upload the images via the Device File Manager icon near the top right of the IDE. Add them one by one.
Step 6) Click the "Run" icon beside the Device File Manager icon to flash the firmware to your device.
Enjoy!
TROUBLESHOOTING
If for any reason you get stuck along the way, join our Telegram chat where you can ask in there to receive support.
Twitter: @DIYbitcoin
Disclaimer: This code was given to me with the permission of a member of the chat since they don't have a github account, or the time to create one!