RISC-V RV32I[MAC] emulator with ELF support

This is a RISC-V emulator for the RV32I architecture, based on TinyEMU and stripped down for RV32I only.

Requires libelf-dev:

$ sudo apt-get install libelf-dev

How to compile it:

$ gcc -O3 -Wall -lelf emu-rv32i.c -o emu-rv32i

or

$ make emu-rv32i

Passed RV32IC compliance tests from https://github.com/riscv/riscv-compliance

• Must install the risc-v toolchain

• Run RV32I compliance tests. Assume emu-rv32i in $PATH environment variable.

$ git clone https://github.com/riscv/riscv-compliance
$ cd riscv-compliance
$ make RISCV_PREFIX=riscv-none-embed- RISCV_DEVICE=rv32i TARGET_SIM=emu-rv32i variant

• Run RV32IMC compliance tests. Assume emu-rv32i in $PATH environment variable.

$ git clone https://github.com/riscv/riscv-compliance
$ cd riscv-compliance
$ make RISCV_PREFIX=riscv-none-embed- RISCV_DEVICE=rv32imc TARGET_SIM=emu-rv32i variant

Compiling and running simple code:

$ make test1

then

$ ./emu-rv32i test1
Hello RISC-V!

• RV32M and RV32A instructions may be enabled by commenting #define STRICT_RV32I.

• RV32C instructions can be enabled by uncommenting #define RV32C

How to build RISC-V toolchain from scratch

https://github.com/riscv/riscv-gnu-toolchain

64-bit universal version (riscv64-unknown-elf-* that can build 32-bit code too):

$ ./configure --prefix=/opt/riscv
$ make

32-bit version (riscv32-unknown-elf-*):

$ ./configure --prefix=/opt/riscv32 --with-arch=rv32i --with-abi=ilp32
$ make