linuxlab-yocto

Setup for the workshop at LinuxLAB 2018

Pre-requisites

The pre-requisites to run this workshop are the following:

• a PC or Laptop with Linux (preferred), Windows or MacOS.
• at least 20GB of free space on disk
• at least 4GB of RAM
• install Docker following the links below

Introduction

This repo is a helper to create an image that is able to run bitbake/poky.

This is based on CROPS/poky-container [https://github.com/crops/poky-container], so that the output generated in the container will be readable by the user on the host.

The instructions will be slightly different depending on whether Linux, Windows or Mac is used. There are setup instructions for using Windows/Mac at https://github.com/crops/docker-win-mac-docs/wiki. When referring to Windows/Mac in the rest of the document, it is assumed the instructions at https://github.com/crops/docker-win-mac-docs/wiki were followed.

The preferred/suggested host machine is always Linux of course.

Install Docker

First you need to install and setup docker into your host machine.

• Linux instructions [1] (follow the Post Install instructions [2] (Only the first chapter "Manage Docker as a non-root user") so you can run docker without admin privileges)

  [1] https://docs.docker.com/engine/installation/linux

  [2] https://docs.docker.com/engine/installation/linux/linux-postinstall

• Mac Instructions [3]

  [3] https://github.com/crops/docker-win-mac-docs/wiki/Mac-Instructions

• Windows Instructions [4] (Docker Toolbox)

  [4] https://github.com/crops/docker-win-mac-docs/wiki/Windows-Instructions-%28Docker-Toolbox%29

Running the container

Here a very simple but usable scenario for using the container is described. It is by no means the only way to run the container, but is a great starting point.

• Create a workdir or volume

  • Linux

    The workdir you create will be used for the output created while using the container. For example a user could create a directory using the command below.

    mkdir -p ${HOME}/linuxlab
    

    It is important that you are the owner of the directory. The owner of the directory is what determines the user id used inside the container. If you are not the owner of the directory, you may not have access to the files the container creates.

    For the rest of the Linux instructions we'll assume the workdir chosen was ${USER}/linuxlab.

  • Windows/Mac

    On Windows or Mac a workdir isn't needed. Instead the volume called myvolume will be used. This volume should have been created when following the instructions at https://github.com/crops/docker-win-mac-docs/wiki.

• The docker command

  • Linux

    Assuming you used the workdir from above, the command to run a container for the first time would be:

    docker run --rm -it -v ${HOME}/linuxlab:/workdir crops/poky --workdir=/workdir
    

  • Windows/Mac

    docker run --rm -it -v myvolume:/workdir crops/poky --workdir=/workdir
    

  Let's discuss the options:

  • --workdir=/workdir: This causes the container to start in the directory specified. This can be any directory in the container. The container will also use the uid and gid of the workdir as the uid and gid of the user in the container.

  This should put you at a prompt similar to:

  pokyuser@3bbac563cacd:/workdir$
  

  At this point you need to follow the instructions below to setup the Yocto Project environment.

Setup the Yocto Project environment

IMPORTANT: before continuing run the docker as described above.

Once you are into the container you should have a prompt similar to:

pokyuser@3bbac563cacd:/workdir$

and now enter the following commands (in the /workdir directory)

• Clone the LinuxLAB project details

Download the project that provides a preconfigured enviroment and a setup script.

cd /workdir
git clone https://github.com/koansoftware/linuxlab-yocto.git

Build Yocto Project

Execute the script is provided to perform all the required tasks in a single command.

/workdir/linuxlab-yocto/setup.sh

Bitbake will start compiling. It will take about 1 hour, depending on your PC resources.

Parsing recipes: 100% |####################################| Time: 0:01:16
Parsing of 814 .bb files complete (0 cached, 814 parsed). 
      1282 targets, 62 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION           = "1.38.0"
BUILD_SYS            = "x86_64-linux"
NATIVELSBSTRING      = "ubuntu-16.04"
TARGET_SYS           = "arm-poky-linux-gnueabi"
MACHINE              = "qemuarm"
DISTRO               = "poky"
DISTRO_VERSION       = "2.5.1"
TUNE_FEATURES        = "arm armv5 thumb dsp"
TARGET_FPU           = "soft"
meta
meta-poky
meta-yocto-bsp       = "sumo:091d470a8ae2641040983484609e5cd4dfcf9bfd"

At this point, after ~1 hour you should have a succesful compilation of your final image.

Initialising tasks: 100% |########################################################| Time: 1:05:02
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 2717 tasks of which 2313 didn't need to be rerun and **all succeeded**.

Note: The manual instructions are described in https://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs.html#releases.

---

Copyright (C)2018 Marco Cavallini - KOAN sas, Bergamo - Italia - http://koansoftware.com