I did some rework so the programm can be used with the new wx-lib (tested version: 3.0.2.0 gtk3 (classic)).
Additionally i added a feature to set awb red and blue gains if awb-mode is set to off.
The original code was written by Bill Grainger.
Simple graphical interface for taking photos on the Raspberry Pi Camera.
Works over ssh.
Written in python 2.7 for the Raspberry Pi
sudo apt-get install -y python-wxgtk2.8 python-wxtools
wget https://github.com/kugelbit/RPICameraGUI
python RPICameraGUI.py
Please note: if you use ssh you need the -X Option.
for example:
ssh -X pi@pi-ip-adress
Feel free to adapt the Code for your needs.
Im not a GUI-Designer so the GUI in the code is maybe not optimal for your set up.
Also this is only a little testing tool for me so dont expect to much "code-quality".
just play around with the following offsets (line: 42 to 47):
# screen layout
xoffset= 2
xfilloffset = 70
xcomoffset=170
ybtwoffset=35
ycomchkoffset=50
ycomfilloffset=45