Can't compile. #2
Comments
|
@bestmjh47: you should use arm-linux-androideabi-4.9 |
kyasu
pushed a commit
that referenced
this issue
Jun 14, 2020
commit e8c75a30a23c6ba63f4ef6895cbf41fd42f21aa2 upstream.
sel_lock cannot nest in the console lock. Thanks to syzkaller, the
kernel states firmly:
> WARNING: possible circular locking dependency detected
> 5.6.0-rc3-syzkaller #0 Not tainted
> ------------------------------------------------------
> syz-executor.4/20336 is trying to acquire lock:
> ffff8880a2e952a0 (&tty->termios_rwsem){++++}, at: tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
>
> but task is already holding lock:
> ffffffff89462e70 (sel_lock){+.+.}, at: paste_selection+0x118/0x470 drivers/tty/vt/selection.c:374
>
> which lock already depends on the new lock.
>
> the existing dependency chain (in reverse order) is:
>
> -> #2 (sel_lock){+.+.}:
> mutex_lock_nested+0x1b/0x30 kernel/locking/mutex.c:1118
> set_selection_kernel+0x3b8/0x18a0 drivers/tty/vt/selection.c:217
> set_selection_user+0x63/0x80 drivers/tty/vt/selection.c:181
> tioclinux+0x103/0x530 drivers/tty/vt/vt.c:3050
> vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364
This is ioctl(TIOCL_SETSEL).
Locks held on the path: console_lock -> sel_lock
> -> #1 (console_lock){+.+.}:
> console_lock+0x46/0x70 kernel/printk/printk.c:2289
> con_flush_chars+0x50/0x650 drivers/tty/vt/vt.c:3223
> n_tty_write+0xeae/0x1200 drivers/tty/n_tty.c:2350
> do_tty_write drivers/tty/tty_io.c:962 [inline]
> tty_write+0x5a1/0x950 drivers/tty/tty_io.c:1046
This is write().
Locks held on the path: termios_rwsem -> console_lock
> -> #0 (&tty->termios_rwsem){++++}:
> down_write+0x57/0x140 kernel/locking/rwsem.c:1534
> tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
> mkiss_receive_buf+0x12aa/0x1340 drivers/net/hamradio/mkiss.c:902
> tty_ldisc_receive_buf+0x12f/0x170 drivers/tty/tty_buffer.c:465
> paste_selection+0x346/0x470 drivers/tty/vt/selection.c:389
> tioclinux+0x121/0x530 drivers/tty/vt/vt.c:3055
> vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364
This is ioctl(TIOCL_PASTESEL).
Locks held on the path: sel_lock -> termios_rwsem
> other info that might help us debug this:
>
> Chain exists of:
> &tty->termios_rwsem --> console_lock --> sel_lock
Clearly. From the above, we have:
console_lock -> sel_lock
sel_lock -> termios_rwsem
termios_rwsem -> console_lock
Fix this by reversing the console_lock -> sel_lock dependency in
ioctl(TIOCL_SETSEL). First, lock sel_lock, then console_lock.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: syzbot+26183d9746e62da329b8@syzkaller.appspotmail.com
Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race")
Link: https://lore.kernel.org/r/20200228115406.5735-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
CVE-2020-8648
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
Change-Id: I9ee48b7939bfe3973b95f0487898c06f50fdf418
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
kyasu
pushed a commit
that referenced
this issue
Jun 14, 2020
commit e8c75a30a23c6ba63f4ef6895cbf41fd42f21aa2 upstream.
sel_lock cannot nest in the console lock. Thanks to syzkaller, the
kernel states firmly:
> WARNING: possible circular locking dependency detected
> 5.6.0-rc3-syzkaller #0 Not tainted
> ------------------------------------------------------
> syz-executor.4/20336 is trying to acquire lock:
> ffff8880a2e952a0 (&tty->termios_rwsem){++++}, at: tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
>
> but task is already holding lock:
> ffffffff89462e70 (sel_lock){+.+.}, at: paste_selection+0x118/0x470 drivers/tty/vt/selection.c:374
>
> which lock already depends on the new lock.
>
> the existing dependency chain (in reverse order) is:
>
> -> #2 (sel_lock){+.+.}:
> mutex_lock_nested+0x1b/0x30 kernel/locking/mutex.c:1118
> set_selection_kernel+0x3b8/0x18a0 drivers/tty/vt/selection.c:217
> set_selection_user+0x63/0x80 drivers/tty/vt/selection.c:181
> tioclinux+0x103/0x530 drivers/tty/vt/vt.c:3050
> vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364
This is ioctl(TIOCL_SETSEL).
Locks held on the path: console_lock -> sel_lock
> -> #1 (console_lock){+.+.}:
> console_lock+0x46/0x70 kernel/printk/printk.c:2289
> con_flush_chars+0x50/0x650 drivers/tty/vt/vt.c:3223
> n_tty_write+0xeae/0x1200 drivers/tty/n_tty.c:2350
> do_tty_write drivers/tty/tty_io.c:962 [inline]
> tty_write+0x5a1/0x950 drivers/tty/tty_io.c:1046
This is write().
Locks held on the path: termios_rwsem -> console_lock
> -> #0 (&tty->termios_rwsem){++++}:
> down_write+0x57/0x140 kernel/locking/rwsem.c:1534
> tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
> mkiss_receive_buf+0x12aa/0x1340 drivers/net/hamradio/mkiss.c:902
> tty_ldisc_receive_buf+0x12f/0x170 drivers/tty/tty_buffer.c:465
> paste_selection+0x346/0x470 drivers/tty/vt/selection.c:389
> tioclinux+0x121/0x530 drivers/tty/vt/vt.c:3055
> vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364
This is ioctl(TIOCL_PASTESEL).
Locks held on the path: sel_lock -> termios_rwsem
> other info that might help us debug this:
>
> Chain exists of:
> &tty->termios_rwsem --> console_lock --> sel_lock
Clearly. From the above, we have:
console_lock -> sel_lock
sel_lock -> termios_rwsem
termios_rwsem -> console_lock
Fix this by reversing the console_lock -> sel_lock dependency in
ioctl(TIOCL_SETSEL). First, lock sel_lock, then console_lock.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: syzbot+26183d9746e62da329b8@syzkaller.appspotmail.com
Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race")
Link: https://lore.kernel.org/r/20200228115406.5735-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
CVE-2020-8648
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
Change-Id: I9ee48b7939bfe3973b95f0487898c06f50fdf418
kyasu
pushed a commit
that referenced
this issue
Jun 14, 2020
commit e8c75a30a23c6ba63f4ef6895cbf41fd42f21aa2 upstream.
sel_lock cannot nest in the console lock. Thanks to syzkaller, the
kernel states firmly:
> WARNING: possible circular locking dependency detected
> 5.6.0-rc3-syzkaller #0 Not tainted
> ------------------------------------------------------
> syz-executor.4/20336 is trying to acquire lock:
> ffff8880a2e952a0 (&tty->termios_rwsem){++++}, at: tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
>
> but task is already holding lock:
> ffffffff89462e70 (sel_lock){+.+.}, at: paste_selection+0x118/0x470 drivers/tty/vt/selection.c:374
>
> which lock already depends on the new lock.
>
> the existing dependency chain (in reverse order) is:
>
> -> #2 (sel_lock){+.+.}:
> mutex_lock_nested+0x1b/0x30 kernel/locking/mutex.c:1118
> set_selection_kernel+0x3b8/0x18a0 drivers/tty/vt/selection.c:217
> set_selection_user+0x63/0x80 drivers/tty/vt/selection.c:181
> tioclinux+0x103/0x530 drivers/tty/vt/vt.c:3050
> vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364
This is ioctl(TIOCL_SETSEL).
Locks held on the path: console_lock -> sel_lock
> -> #1 (console_lock){+.+.}:
> console_lock+0x46/0x70 kernel/printk/printk.c:2289
> con_flush_chars+0x50/0x650 drivers/tty/vt/vt.c:3223
> n_tty_write+0xeae/0x1200 drivers/tty/n_tty.c:2350
> do_tty_write drivers/tty/tty_io.c:962 [inline]
> tty_write+0x5a1/0x950 drivers/tty/tty_io.c:1046
This is write().
Locks held on the path: termios_rwsem -> console_lock
> -> #0 (&tty->termios_rwsem){++++}:
> down_write+0x57/0x140 kernel/locking/rwsem.c:1534
> tty_unthrottle+0x22/0x100 drivers/tty/tty_ioctl.c:136
> mkiss_receive_buf+0x12aa/0x1340 drivers/net/hamradio/mkiss.c:902
> tty_ldisc_receive_buf+0x12f/0x170 drivers/tty/tty_buffer.c:465
> paste_selection+0x346/0x470 drivers/tty/vt/selection.c:389
> tioclinux+0x121/0x530 drivers/tty/vt/vt.c:3055
> vt_ioctl+0x3f1/0x3a30 drivers/tty/vt/vt_ioctl.c:364
This is ioctl(TIOCL_PASTESEL).
Locks held on the path: sel_lock -> termios_rwsem
> other info that might help us debug this:
>
> Chain exists of:
> &tty->termios_rwsem --> console_lock --> sel_lock
Clearly. From the above, we have:
console_lock -> sel_lock
sel_lock -> termios_rwsem
termios_rwsem -> console_lock
Fix this by reversing the console_lock -> sel_lock dependency in
ioctl(TIOCL_SETSEL). First, lock sel_lock, then console_lock.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: syzbot+26183d9746e62da329b8@syzkaller.appspotmail.com
Fixes: 07e6124a1a46 ("vt: selection, close sel_buffer race")
Link: https://lore.kernel.org/r/20200228115406.5735-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
CVE-2020-8648
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
Change-Id: I9ee48b7939bfe3973b95f0487898c06f50fdf418
kyasu
pushed a commit
that referenced
this issue
Aug 7, 2020
commit 056ad39ee9253873522f6469c3364964a322912b upstream. FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug in the USB scatter-gather library: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27 CPU: 1 PID: 27 Comm: kworker/u4:1 Not tainted 5.5.11 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: scsi_tmf_2 scmd_eh_abort_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x153/0x1cb mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x152/0x1b0 mm/kasan/generic.c:192 __kasan_check_read+0x11/0x20 mm/kasan/common.c:95 atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 usb_unlink_urb+0x72/0xb0 drivers/usb/core/urb.c:657 usb_sg_cancel+0x14e/0x290 drivers/usb/core/message.c:602 usb_stor_stop_transport+0x5e/0xa0 drivers/usb/storage/transport.c:937 This bug occurs when cancellation of the S-G transfer races with transfer completion. When that happens, usb_sg_cancel() may continue to access the transfer's URBs after usb_sg_wait() has freed them. The bug is caused by the fact that usb_sg_cancel() does not take any sort of reference to the transfer, and so there is nothing to prevent the URBs from being deallocated while the routine is trying to use them. The fix is to take such a reference by incrementing the transfer's io->count field while the cancellation is in progres and decrementing it afterward. The transfer's URBs are not deallocated until io->complete is triggered, which happens when io->count reaches zero. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2003281615140.14837-100000@netrider.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> CVE-2020-12464 Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org> Change-Id: Ic5ba06bd1fe8d47a5171bbaee8493bc4a9a1c449
kyasu
pushed a commit
that referenced
this issue
Sep 26, 2020
commit 056ad39ee9253873522f6469c3364964a322912b upstream. FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug in the USB scatter-gather library: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27 CPU: 1 PID: 27 Comm: kworker/u4:1 Not tainted 5.5.11 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: scsi_tmf_2 scmd_eh_abort_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x153/0x1cb mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x152/0x1b0 mm/kasan/generic.c:192 __kasan_check_read+0x11/0x20 mm/kasan/common.c:95 atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 usb_unlink_urb+0x72/0xb0 drivers/usb/core/urb.c:657 usb_sg_cancel+0x14e/0x290 drivers/usb/core/message.c:602 usb_stor_stop_transport+0x5e/0xa0 drivers/usb/storage/transport.c:937 This bug occurs when cancellation of the S-G transfer races with transfer completion. When that happens, usb_sg_cancel() may continue to access the transfer's URBs after usb_sg_wait() has freed them. The bug is caused by the fact that usb_sg_cancel() does not take any sort of reference to the transfer, and so there is nothing to prevent the URBs from being deallocated while the routine is trying to use them. The fix is to take such a reference by incrementing the transfer's io->count field while the cancellation is in progres and decrementing it afterward. The transfer's URBs are not deallocated until io->complete is triggered, which happens when io->count reaches zero. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2003281615140.14837-100000@netrider.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> CVE-2020-12464 Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org> Change-Id: Ic5ba06bd1fe8d47a5171bbaee8493bc4a9a1c449
kyasu
pushed a commit
that referenced
this issue
Sep 27, 2020
commit 056ad39ee9253873522f6469c3364964a322912b upstream. FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug in the USB scatter-gather library: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27 CPU: 1 PID: 27 Comm: kworker/u4:1 Not tainted 5.5.11 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: scsi_tmf_2 scmd_eh_abort_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x153/0x1cb mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x152/0x1b0 mm/kasan/generic.c:192 __kasan_check_read+0x11/0x20 mm/kasan/common.c:95 atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 usb_unlink_urb+0x72/0xb0 drivers/usb/core/urb.c:657 usb_sg_cancel+0x14e/0x290 drivers/usb/core/message.c:602 usb_stor_stop_transport+0x5e/0xa0 drivers/usb/storage/transport.c:937 This bug occurs when cancellation of the S-G transfer races with transfer completion. When that happens, usb_sg_cancel() may continue to access the transfer's URBs after usb_sg_wait() has freed them. The bug is caused by the fact that usb_sg_cancel() does not take any sort of reference to the transfer, and so there is nothing to prevent the URBs from being deallocated while the routine is trying to use them. The fix is to take such a reference by incrementing the transfer's io->count field while the cancellation is in progres and decrementing it afterward. The transfer's URBs are not deallocated until io->complete is triggered, which happens when io->count reaches zero. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Kyungtae Kim <kt0755@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2003281615140.14837-100000@netrider.rowland.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> CVE-2020-12464 Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org> Change-Id: Ic5ba06bd1fe8d47a5171bbaee8493bc4a9a1c449
kyasu
pushed a commit
that referenced
this issue
Jun 8, 2021
[ Upstream commit 2d3a8e2deddea6c89961c422ec0c5b851e648c14 ]
In blkdev_get() we call __blkdev_get() to do some internal jobs and if
there is some errors in __blkdev_get(), the bdput() is called which
means we have released the refcount of the bdev (actually the refcount of
the bdev inode). This means we cannot access bdev after that point. But
acctually bdev is still accessed in blkdev_get() after calling
__blkdev_get(). This results in use-after-free if the refcount is the
last one we released in __blkdev_get(). Let's take a look at the
following scenerio:
CPU0 CPU1 CPU2
blkdev_open blkdev_open Remove disk
bd_acquire
blkdev_get
__blkdev_get del_gendisk
bdev_unhash_inode
bd_acquire bdev_get_gendisk
bd_forget failed because of unhashed
bdput
bdput (the last one)
bdev_evict_inode
access bdev => use after free
[ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0
[ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132
[ 459.352347]
[ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 #2
[ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 459.354947] Call Trace:
[ 459.355337] dump_stack+0x111/0x19e
[ 459.355879] ? __lock_acquire+0x24c1/0x31b0
[ 459.356523] print_address_description+0x60/0x223
[ 459.357248] ? __lock_acquire+0x24c1/0x31b0
[ 459.357887] kasan_report.cold+0xae/0x2d8
[ 459.358503] __lock_acquire+0x24c1/0x31b0
[ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580
[ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.361123] ? finish_task_switch+0x125/0x600
[ 459.361812] ? finish_task_switch+0xee/0x600
[ 459.362471] ? mark_held_locks+0xf0/0xf0
[ 459.363108] ? __schedule+0x96f/0x21d0
[ 459.363716] lock_acquire+0x111/0x320
[ 459.364285] ? blkdev_get+0xce/0xbe0
[ 459.364846] ? blkdev_get+0xce/0xbe0
[ 459.365390] __mutex_lock+0xf9/0x12a0
[ 459.365948] ? blkdev_get+0xce/0xbe0
[ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0
[ 459.367130] ? blkdev_get+0xce/0xbe0
[ 459.367678] ? destroy_inode+0xbc/0x110
[ 459.368261] ? mutex_trylock+0x1a0/0x1a0
[ 459.368867] ? __blkdev_get+0x3e6/0x1280
[ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0
[ 459.370114] ? blkdev_get+0xce/0xbe0
[ 459.370656] blkdev_get+0xce/0xbe0
[ 459.371178] ? find_held_lock+0x2c/0x110
[ 459.371774] ? __blkdev_get+0x1280/0x1280
[ 459.372383] ? lock_downgrade+0x680/0x680
[ 459.373002] ? lock_acquire+0x111/0x320
[ 459.373587] ? bd_acquire+0x21/0x2c0
[ 459.374134] ? do_raw_spin_unlock+0x4f/0x250
[ 459.374780] blkdev_open+0x202/0x290
[ 459.375325] do_dentry_open+0x49e/0x1050
[ 459.375924] ? blkdev_get_by_dev+0x70/0x70
[ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0
[ 459.377192] ? inode_permission+0xbe/0x3a0
[ 459.377818] path_openat+0x148c/0x3f50
[ 459.378392] ? kmem_cache_alloc+0xd5/0x280
[ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.379802] ? path_lookupat.isra.0+0x900/0x900
[ 459.380489] ? __lock_is_held+0xad/0x140
[ 459.381093] do_filp_open+0x1a1/0x280
[ 459.381654] ? may_open_dev+0xf0/0xf0
[ 459.382214] ? find_held_lock+0x2c/0x110
[ 459.382816] ? lock_downgrade+0x680/0x680
[ 459.383425] ? __lock_is_held+0xad/0x140
[ 459.384024] ? do_raw_spin_unlock+0x4f/0x250
[ 459.384668] ? _raw_spin_unlock+0x1f/0x30
[ 459.385280] ? __alloc_fd+0x448/0x560
[ 459.385841] do_sys_open+0x3c3/0x500
[ 459.386386] ? filp_open+0x70/0x70
[ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0
[ 459.388342] ? do_syscall_64+0x1a/0x520
[ 459.388930] do_syscall_64+0xc3/0x520
[ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.390248] RIP: 0033:0x416211
[ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83
04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f
05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d
01
[ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002
[ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211
[ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00
[ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a
[ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff
[ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c
[ 459.400168]
[ 459.400430] Allocated by task 20132:
[ 459.401038] kasan_kmalloc+0xbf/0xe0
[ 459.401652] kmem_cache_alloc+0xd5/0x280
[ 459.402330] bdev_alloc_inode+0x18/0x40
[ 459.402970] alloc_inode+0x5f/0x180
[ 459.403510] iget5_locked+0x57/0xd0
[ 459.404095] bdget+0x94/0x4e0
[ 459.404607] bd_acquire+0xfa/0x2c0
[ 459.405113] blkdev_open+0x110/0x290
[ 459.405702] do_dentry_open+0x49e/0x1050
[ 459.406340] path_openat+0x148c/0x3f50
[ 459.406926] do_filp_open+0x1a1/0x280
[ 459.407471] do_sys_open+0x3c3/0x500
[ 459.408010] do_syscall_64+0xc3/0x520
[ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.409415]
[ 459.409679] Freed by task 1262:
[ 459.410212] __kasan_slab_free+0x129/0x170
[ 459.410919] kmem_cache_free+0xb2/0x2a0
[ 459.411564] rcu_process_callbacks+0xbb2/0x2320
[ 459.412318] __do_softirq+0x225/0x8ac
Fix this by delaying bdput() to the end of blkdev_get() which means we
have finished accessing bdev.
Fixes: 77ea887 ("implement in-kernel gendisk events handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change-Id: I642bd3c3224cc174ba4bdd57133b1a17fb35dccd
CVE-2020-15436
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
kyasu
pushed a commit
that referenced
this issue
Jun 8, 2021
[ Upstream commit 2d3a8e2deddea6c89961c422ec0c5b851e648c14 ]
In blkdev_get() we call __blkdev_get() to do some internal jobs and if
there is some errors in __blkdev_get(), the bdput() is called which
means we have released the refcount of the bdev (actually the refcount of
the bdev inode). This means we cannot access bdev after that point. But
acctually bdev is still accessed in blkdev_get() after calling
__blkdev_get(). This results in use-after-free if the refcount is the
last one we released in __blkdev_get(). Let's take a look at the
following scenerio:
CPU0 CPU1 CPU2
blkdev_open blkdev_open Remove disk
bd_acquire
blkdev_get
__blkdev_get del_gendisk
bdev_unhash_inode
bd_acquire bdev_get_gendisk
bd_forget failed because of unhashed
bdput
bdput (the last one)
bdev_evict_inode
access bdev => use after free
[ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0
[ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132
[ 459.352347]
[ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 #2
[ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 459.354947] Call Trace:
[ 459.355337] dump_stack+0x111/0x19e
[ 459.355879] ? __lock_acquire+0x24c1/0x31b0
[ 459.356523] print_address_description+0x60/0x223
[ 459.357248] ? __lock_acquire+0x24c1/0x31b0
[ 459.357887] kasan_report.cold+0xae/0x2d8
[ 459.358503] __lock_acquire+0x24c1/0x31b0
[ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580
[ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.361123] ? finish_task_switch+0x125/0x600
[ 459.361812] ? finish_task_switch+0xee/0x600
[ 459.362471] ? mark_held_locks+0xf0/0xf0
[ 459.363108] ? __schedule+0x96f/0x21d0
[ 459.363716] lock_acquire+0x111/0x320
[ 459.364285] ? blkdev_get+0xce/0xbe0
[ 459.364846] ? blkdev_get+0xce/0xbe0
[ 459.365390] __mutex_lock+0xf9/0x12a0
[ 459.365948] ? blkdev_get+0xce/0xbe0
[ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0
[ 459.367130] ? blkdev_get+0xce/0xbe0
[ 459.367678] ? destroy_inode+0xbc/0x110
[ 459.368261] ? mutex_trylock+0x1a0/0x1a0
[ 459.368867] ? __blkdev_get+0x3e6/0x1280
[ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0
[ 459.370114] ? blkdev_get+0xce/0xbe0
[ 459.370656] blkdev_get+0xce/0xbe0
[ 459.371178] ? find_held_lock+0x2c/0x110
[ 459.371774] ? __blkdev_get+0x1280/0x1280
[ 459.372383] ? lock_downgrade+0x680/0x680
[ 459.373002] ? lock_acquire+0x111/0x320
[ 459.373587] ? bd_acquire+0x21/0x2c0
[ 459.374134] ? do_raw_spin_unlock+0x4f/0x250
[ 459.374780] blkdev_open+0x202/0x290
[ 459.375325] do_dentry_open+0x49e/0x1050
[ 459.375924] ? blkdev_get_by_dev+0x70/0x70
[ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0
[ 459.377192] ? inode_permission+0xbe/0x3a0
[ 459.377818] path_openat+0x148c/0x3f50
[ 459.378392] ? kmem_cache_alloc+0xd5/0x280
[ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.379802] ? path_lookupat.isra.0+0x900/0x900
[ 459.380489] ? __lock_is_held+0xad/0x140
[ 459.381093] do_filp_open+0x1a1/0x280
[ 459.381654] ? may_open_dev+0xf0/0xf0
[ 459.382214] ? find_held_lock+0x2c/0x110
[ 459.382816] ? lock_downgrade+0x680/0x680
[ 459.383425] ? __lock_is_held+0xad/0x140
[ 459.384024] ? do_raw_spin_unlock+0x4f/0x250
[ 459.384668] ? _raw_spin_unlock+0x1f/0x30
[ 459.385280] ? __alloc_fd+0x448/0x560
[ 459.385841] do_sys_open+0x3c3/0x500
[ 459.386386] ? filp_open+0x70/0x70
[ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0
[ 459.388342] ? do_syscall_64+0x1a/0x520
[ 459.388930] do_syscall_64+0xc3/0x520
[ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.390248] RIP: 0033:0x416211
[ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83
04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f
05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d
01
[ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002
[ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211
[ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00
[ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a
[ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff
[ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c
[ 459.400168]
[ 459.400430] Allocated by task 20132:
[ 459.401038] kasan_kmalloc+0xbf/0xe0
[ 459.401652] kmem_cache_alloc+0xd5/0x280
[ 459.402330] bdev_alloc_inode+0x18/0x40
[ 459.402970] alloc_inode+0x5f/0x180
[ 459.403510] iget5_locked+0x57/0xd0
[ 459.404095] bdget+0x94/0x4e0
[ 459.404607] bd_acquire+0xfa/0x2c0
[ 459.405113] blkdev_open+0x110/0x290
[ 459.405702] do_dentry_open+0x49e/0x1050
[ 459.406340] path_openat+0x148c/0x3f50
[ 459.406926] do_filp_open+0x1a1/0x280
[ 459.407471] do_sys_open+0x3c3/0x500
[ 459.408010] do_syscall_64+0xc3/0x520
[ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.409415]
[ 459.409679] Freed by task 1262:
[ 459.410212] __kasan_slab_free+0x129/0x170
[ 459.410919] kmem_cache_free+0xb2/0x2a0
[ 459.411564] rcu_process_callbacks+0xbb2/0x2320
[ 459.412318] __do_softirq+0x225/0x8ac
Fix this by delaying bdput() to the end of blkdev_get() which means we
have finished accessing bdev.
Fixes: 77ea887 ("implement in-kernel gendisk events handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change-Id: I642bd3c3224cc174ba4bdd57133b1a17fb35dccd
CVE-2020-15436
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
kyasu
pushed a commit
that referenced
this issue
Jun 8, 2021
[ Upstream commit 2d3a8e2deddea6c89961c422ec0c5b851e648c14 ]
In blkdev_get() we call __blkdev_get() to do some internal jobs and if
there is some errors in __blkdev_get(), the bdput() is called which
means we have released the refcount of the bdev (actually the refcount of
the bdev inode). This means we cannot access bdev after that point. But
acctually bdev is still accessed in blkdev_get() after calling
__blkdev_get(). This results in use-after-free if the refcount is the
last one we released in __blkdev_get(). Let's take a look at the
following scenerio:
CPU0 CPU1 CPU2
blkdev_open blkdev_open Remove disk
bd_acquire
blkdev_get
__blkdev_get del_gendisk
bdev_unhash_inode
bd_acquire bdev_get_gendisk
bd_forget failed because of unhashed
bdput
bdput (the last one)
bdev_evict_inode
access bdev => use after free
[ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0
[ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132
[ 459.352347]
[ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 #2
[ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 459.354947] Call Trace:
[ 459.355337] dump_stack+0x111/0x19e
[ 459.355879] ? __lock_acquire+0x24c1/0x31b0
[ 459.356523] print_address_description+0x60/0x223
[ 459.357248] ? __lock_acquire+0x24c1/0x31b0
[ 459.357887] kasan_report.cold+0xae/0x2d8
[ 459.358503] __lock_acquire+0x24c1/0x31b0
[ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580
[ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.361123] ? finish_task_switch+0x125/0x600
[ 459.361812] ? finish_task_switch+0xee/0x600
[ 459.362471] ? mark_held_locks+0xf0/0xf0
[ 459.363108] ? __schedule+0x96f/0x21d0
[ 459.363716] lock_acquire+0x111/0x320
[ 459.364285] ? blkdev_get+0xce/0xbe0
[ 459.364846] ? blkdev_get+0xce/0xbe0
[ 459.365390] __mutex_lock+0xf9/0x12a0
[ 459.365948] ? blkdev_get+0xce/0xbe0
[ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0
[ 459.367130] ? blkdev_get+0xce/0xbe0
[ 459.367678] ? destroy_inode+0xbc/0x110
[ 459.368261] ? mutex_trylock+0x1a0/0x1a0
[ 459.368867] ? __blkdev_get+0x3e6/0x1280
[ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0
[ 459.370114] ? blkdev_get+0xce/0xbe0
[ 459.370656] blkdev_get+0xce/0xbe0
[ 459.371178] ? find_held_lock+0x2c/0x110
[ 459.371774] ? __blkdev_get+0x1280/0x1280
[ 459.372383] ? lock_downgrade+0x680/0x680
[ 459.373002] ? lock_acquire+0x111/0x320
[ 459.373587] ? bd_acquire+0x21/0x2c0
[ 459.374134] ? do_raw_spin_unlock+0x4f/0x250
[ 459.374780] blkdev_open+0x202/0x290
[ 459.375325] do_dentry_open+0x49e/0x1050
[ 459.375924] ? blkdev_get_by_dev+0x70/0x70
[ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0
[ 459.377192] ? inode_permission+0xbe/0x3a0
[ 459.377818] path_openat+0x148c/0x3f50
[ 459.378392] ? kmem_cache_alloc+0xd5/0x280
[ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.379802] ? path_lookupat.isra.0+0x900/0x900
[ 459.380489] ? __lock_is_held+0xad/0x140
[ 459.381093] do_filp_open+0x1a1/0x280
[ 459.381654] ? may_open_dev+0xf0/0xf0
[ 459.382214] ? find_held_lock+0x2c/0x110
[ 459.382816] ? lock_downgrade+0x680/0x680
[ 459.383425] ? __lock_is_held+0xad/0x140
[ 459.384024] ? do_raw_spin_unlock+0x4f/0x250
[ 459.384668] ? _raw_spin_unlock+0x1f/0x30
[ 459.385280] ? __alloc_fd+0x448/0x560
[ 459.385841] do_sys_open+0x3c3/0x500
[ 459.386386] ? filp_open+0x70/0x70
[ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0
[ 459.388342] ? do_syscall_64+0x1a/0x520
[ 459.388930] do_syscall_64+0xc3/0x520
[ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.390248] RIP: 0033:0x416211
[ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83
04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f
05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d
01
[ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002
[ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211
[ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00
[ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a
[ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff
[ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c
[ 459.400168]
[ 459.400430] Allocated by task 20132:
[ 459.401038] kasan_kmalloc+0xbf/0xe0
[ 459.401652] kmem_cache_alloc+0xd5/0x280
[ 459.402330] bdev_alloc_inode+0x18/0x40
[ 459.402970] alloc_inode+0x5f/0x180
[ 459.403510] iget5_locked+0x57/0xd0
[ 459.404095] bdget+0x94/0x4e0
[ 459.404607] bd_acquire+0xfa/0x2c0
[ 459.405113] blkdev_open+0x110/0x290
[ 459.405702] do_dentry_open+0x49e/0x1050
[ 459.406340] path_openat+0x148c/0x3f50
[ 459.406926] do_filp_open+0x1a1/0x280
[ 459.407471] do_sys_open+0x3c3/0x500
[ 459.408010] do_syscall_64+0xc3/0x520
[ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.409415]
[ 459.409679] Freed by task 1262:
[ 459.410212] __kasan_slab_free+0x129/0x170
[ 459.410919] kmem_cache_free+0xb2/0x2a0
[ 459.411564] rcu_process_callbacks+0xbb2/0x2320
[ 459.412318] __do_softirq+0x225/0x8ac
Fix this by delaying bdput() to the end of blkdev_get() which means we
have finished accessing bdev.
Fixes: 77ea887 ("implement in-kernel gendisk events handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change-Id: I642bd3c3224cc174ba4bdd57133b1a17fb35dccd
CVE-2020-15436
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
kyasu
pushed a commit
that referenced
this issue
Jun 8, 2021
[ Upstream commit 2d3a8e2deddea6c89961c422ec0c5b851e648c14 ]
In blkdev_get() we call __blkdev_get() to do some internal jobs and if
there is some errors in __blkdev_get(), the bdput() is called which
means we have released the refcount of the bdev (actually the refcount of
the bdev inode). This means we cannot access bdev after that point. But
acctually bdev is still accessed in blkdev_get() after calling
__blkdev_get(). This results in use-after-free if the refcount is the
last one we released in __blkdev_get(). Let's take a look at the
following scenerio:
CPU0 CPU1 CPU2
blkdev_open blkdev_open Remove disk
bd_acquire
blkdev_get
__blkdev_get del_gendisk
bdev_unhash_inode
bd_acquire bdev_get_gendisk
bd_forget failed because of unhashed
bdput
bdput (the last one)
bdev_evict_inode
access bdev => use after free
[ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0
[ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132
[ 459.352347]
[ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 #2
[ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 459.354947] Call Trace:
[ 459.355337] dump_stack+0x111/0x19e
[ 459.355879] ? __lock_acquire+0x24c1/0x31b0
[ 459.356523] print_address_description+0x60/0x223
[ 459.357248] ? __lock_acquire+0x24c1/0x31b0
[ 459.357887] kasan_report.cold+0xae/0x2d8
[ 459.358503] __lock_acquire+0x24c1/0x31b0
[ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580
[ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.361123] ? finish_task_switch+0x125/0x600
[ 459.361812] ? finish_task_switch+0xee/0x600
[ 459.362471] ? mark_held_locks+0xf0/0xf0
[ 459.363108] ? __schedule+0x96f/0x21d0
[ 459.363716] lock_acquire+0x111/0x320
[ 459.364285] ? blkdev_get+0xce/0xbe0
[ 459.364846] ? blkdev_get+0xce/0xbe0
[ 459.365390] __mutex_lock+0xf9/0x12a0
[ 459.365948] ? blkdev_get+0xce/0xbe0
[ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0
[ 459.367130] ? blkdev_get+0xce/0xbe0
[ 459.367678] ? destroy_inode+0xbc/0x110
[ 459.368261] ? mutex_trylock+0x1a0/0x1a0
[ 459.368867] ? __blkdev_get+0x3e6/0x1280
[ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0
[ 459.370114] ? blkdev_get+0xce/0xbe0
[ 459.370656] blkdev_get+0xce/0xbe0
[ 459.371178] ? find_held_lock+0x2c/0x110
[ 459.371774] ? __blkdev_get+0x1280/0x1280
[ 459.372383] ? lock_downgrade+0x680/0x680
[ 459.373002] ? lock_acquire+0x111/0x320
[ 459.373587] ? bd_acquire+0x21/0x2c0
[ 459.374134] ? do_raw_spin_unlock+0x4f/0x250
[ 459.374780] blkdev_open+0x202/0x290
[ 459.375325] do_dentry_open+0x49e/0x1050
[ 459.375924] ? blkdev_get_by_dev+0x70/0x70
[ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0
[ 459.377192] ? inode_permission+0xbe/0x3a0
[ 459.377818] path_openat+0x148c/0x3f50
[ 459.378392] ? kmem_cache_alloc+0xd5/0x280
[ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.379802] ? path_lookupat.isra.0+0x900/0x900
[ 459.380489] ? __lock_is_held+0xad/0x140
[ 459.381093] do_filp_open+0x1a1/0x280
[ 459.381654] ? may_open_dev+0xf0/0xf0
[ 459.382214] ? find_held_lock+0x2c/0x110
[ 459.382816] ? lock_downgrade+0x680/0x680
[ 459.383425] ? __lock_is_held+0xad/0x140
[ 459.384024] ? do_raw_spin_unlock+0x4f/0x250
[ 459.384668] ? _raw_spin_unlock+0x1f/0x30
[ 459.385280] ? __alloc_fd+0x448/0x560
[ 459.385841] do_sys_open+0x3c3/0x500
[ 459.386386] ? filp_open+0x70/0x70
[ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0
[ 459.388342] ? do_syscall_64+0x1a/0x520
[ 459.388930] do_syscall_64+0xc3/0x520
[ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.390248] RIP: 0033:0x416211
[ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83
04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f
05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d
01
[ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002
[ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211
[ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00
[ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a
[ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff
[ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c
[ 459.400168]
[ 459.400430] Allocated by task 20132:
[ 459.401038] kasan_kmalloc+0xbf/0xe0
[ 459.401652] kmem_cache_alloc+0xd5/0x280
[ 459.402330] bdev_alloc_inode+0x18/0x40
[ 459.402970] alloc_inode+0x5f/0x180
[ 459.403510] iget5_locked+0x57/0xd0
[ 459.404095] bdget+0x94/0x4e0
[ 459.404607] bd_acquire+0xfa/0x2c0
[ 459.405113] blkdev_open+0x110/0x290
[ 459.405702] do_dentry_open+0x49e/0x1050
[ 459.406340] path_openat+0x148c/0x3f50
[ 459.406926] do_filp_open+0x1a1/0x280
[ 459.407471] do_sys_open+0x3c3/0x500
[ 459.408010] do_syscall_64+0xc3/0x520
[ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.409415]
[ 459.409679] Freed by task 1262:
[ 459.410212] __kasan_slab_free+0x129/0x170
[ 459.410919] kmem_cache_free+0xb2/0x2a0
[ 459.411564] rcu_process_callbacks+0xbb2/0x2320
[ 459.412318] __do_softirq+0x225/0x8ac
Fix this by delaying bdput() to the end of blkdev_get() which means we
have finished accessing bdev.
Fixes: 77ea887 ("implement in-kernel gendisk events handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change-Id: I642bd3c3224cc174ba4bdd57133b1a17fb35dccd
CVE-2020-15436
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
kyasu
pushed a commit
that referenced
this issue
Jun 8, 2021
[ Upstream commit 2d3a8e2deddea6c89961c422ec0c5b851e648c14 ]
In blkdev_get() we call __blkdev_get() to do some internal jobs and if
there is some errors in __blkdev_get(), the bdput() is called which
means we have released the refcount of the bdev (actually the refcount of
the bdev inode). This means we cannot access bdev after that point. But
acctually bdev is still accessed in blkdev_get() after calling
__blkdev_get(). This results in use-after-free if the refcount is the
last one we released in __blkdev_get(). Let's take a look at the
following scenerio:
CPU0 CPU1 CPU2
blkdev_open blkdev_open Remove disk
bd_acquire
blkdev_get
__blkdev_get del_gendisk
bdev_unhash_inode
bd_acquire bdev_get_gendisk
bd_forget failed because of unhashed
bdput
bdput (the last one)
bdev_evict_inode
access bdev => use after free
[ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0
[ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132
[ 459.352347]
[ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 #2
[ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 459.354947] Call Trace:
[ 459.355337] dump_stack+0x111/0x19e
[ 459.355879] ? __lock_acquire+0x24c1/0x31b0
[ 459.356523] print_address_description+0x60/0x223
[ 459.357248] ? __lock_acquire+0x24c1/0x31b0
[ 459.357887] kasan_report.cold+0xae/0x2d8
[ 459.358503] __lock_acquire+0x24c1/0x31b0
[ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580
[ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40
[ 459.361123] ? finish_task_switch+0x125/0x600
[ 459.361812] ? finish_task_switch+0xee/0x600
[ 459.362471] ? mark_held_locks+0xf0/0xf0
[ 459.363108] ? __schedule+0x96f/0x21d0
[ 459.363716] lock_acquire+0x111/0x320
[ 459.364285] ? blkdev_get+0xce/0xbe0
[ 459.364846] ? blkdev_get+0xce/0xbe0
[ 459.365390] __mutex_lock+0xf9/0x12a0
[ 459.365948] ? blkdev_get+0xce/0xbe0
[ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0
[ 459.367130] ? blkdev_get+0xce/0xbe0
[ 459.367678] ? destroy_inode+0xbc/0x110
[ 459.368261] ? mutex_trylock+0x1a0/0x1a0
[ 459.368867] ? __blkdev_get+0x3e6/0x1280
[ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0
[ 459.370114] ? blkdev_get+0xce/0xbe0
[ 459.370656] blkdev_get+0xce/0xbe0
[ 459.371178] ? find_held_lock+0x2c/0x110
[ 459.371774] ? __blkdev_get+0x1280/0x1280
[ 459.372383] ? lock_downgrade+0x680/0x680
[ 459.373002] ? lock_acquire+0x111/0x320
[ 459.373587] ? bd_acquire+0x21/0x2c0
[ 459.374134] ? do_raw_spin_unlock+0x4f/0x250
[ 459.374780] blkdev_open+0x202/0x290
[ 459.375325] do_dentry_open+0x49e/0x1050
[ 459.375924] ? blkdev_get_by_dev+0x70/0x70
[ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0
[ 459.377192] ? inode_permission+0xbe/0x3a0
[ 459.377818] path_openat+0x148c/0x3f50
[ 459.378392] ? kmem_cache_alloc+0xd5/0x280
[ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.379802] ? path_lookupat.isra.0+0x900/0x900
[ 459.380489] ? __lock_is_held+0xad/0x140
[ 459.381093] do_filp_open+0x1a1/0x280
[ 459.381654] ? may_open_dev+0xf0/0xf0
[ 459.382214] ? find_held_lock+0x2c/0x110
[ 459.382816] ? lock_downgrade+0x680/0x680
[ 459.383425] ? __lock_is_held+0xad/0x140
[ 459.384024] ? do_raw_spin_unlock+0x4f/0x250
[ 459.384668] ? _raw_spin_unlock+0x1f/0x30
[ 459.385280] ? __alloc_fd+0x448/0x560
[ 459.385841] do_sys_open+0x3c3/0x500
[ 459.386386] ? filp_open+0x70/0x70
[ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c
[ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0
[ 459.388342] ? do_syscall_64+0x1a/0x520
[ 459.388930] do_syscall_64+0xc3/0x520
[ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.390248] RIP: 0033:0x416211
[ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83
04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f
05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d
01
[ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002
[ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211
[ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00
[ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a
[ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff
[ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c
[ 459.400168]
[ 459.400430] Allocated by task 20132:
[ 459.401038] kasan_kmalloc+0xbf/0xe0
[ 459.401652] kmem_cache_alloc+0xd5/0x280
[ 459.402330] bdev_alloc_inode+0x18/0x40
[ 459.402970] alloc_inode+0x5f/0x180
[ 459.403510] iget5_locked+0x57/0xd0
[ 459.404095] bdget+0x94/0x4e0
[ 459.404607] bd_acquire+0xfa/0x2c0
[ 459.405113] blkdev_open+0x110/0x290
[ 459.405702] do_dentry_open+0x49e/0x1050
[ 459.406340] path_openat+0x148c/0x3f50
[ 459.406926] do_filp_open+0x1a1/0x280
[ 459.407471] do_sys_open+0x3c3/0x500
[ 459.408010] do_syscall_64+0xc3/0x520
[ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 459.409415]
[ 459.409679] Freed by task 1262:
[ 459.410212] __kasan_slab_free+0x129/0x170
[ 459.410919] kmem_cache_free+0xb2/0x2a0
[ 459.411564] rcu_process_callbacks+0xbb2/0x2320
[ 459.412318] __do_softirq+0x225/0x8ac
Fix this by delaying bdput() to the end of blkdev_get() which means we
have finished accessing bdev.
Fixes: 77ea887 ("implement in-kernel gendisk events handling")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change-Id: I642bd3c3224cc174ba4bdd57133b1a17fb35dccd
CVE-2020-15436
Signed-off-by: Kevin F. Haggerty <haggertk@lineageos.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
With arm-eabi-4.8 and included lineageos_ks01ltexx-defconfig, it brings me errors below.
ERROR: modpost: Found 13 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
To build the kernel despite the mismatches, build with:
'make CONFIG_NO_ERROR_ON_MISMATCH=y'
(NOTE: This is not recommended)
The text was updated successfully, but these errors were encountered: