USBDebugger Resource supported vendors/models

[snerzkristall]

As of now, only two vendors/models are supported.
Is it possible to use other USBDebuggers (e.g. Olimex ARM-USB-OCD-H) with the openocd driver?

Simply adding the vendor and model ID in /labgrid/resource/udev.py a shown below does not work.

class USBDebugger(USBResource):
    def filter_match(self, device):
        match = (device.properties.get('ID_VENDOR_ID'), device.properties.get('ID_MODEL_ID'))

        if match not in [
                         ("0403", "6010"),  # FT2232C/D/H Dual UART/FIFO IC
                         ("0483", "374f"),  # STLINK-V3
                         ("15ba", "002b"),  # Olimex ARM-USB-OCD-H
                         ]:
            return False

        return super().filter_match(device)

EDIT Solution

• adding vendor/vodel ID to udev.py does work after restarting
• will create PR to add Olimex devices in future

[jluebbe]

If that device is supported by OpenOCD, adding the vendor/model IDs should be enough. Does it show up with labgrid-suggest after your addition?

[snerzkristall]

Flashing/Debugging STM32 devices directly is possible with openocd-0.10.0 (Raspi 4b --> STM32 Board).

Works now after restarting raspi... :)

Thanks a lot anyway!

[jluebbe]

We'd be happy to merge a PR which adds these IDs. :)