Multiple Output data type changes to single for dummy task after reboot.

[bccrew]

@Grovkillen @TD-er

Like described in the forum topic.

I am using a D1 Mini.

https://www.letscontrolit.com/forum/viewtopic.php?f=2&t=7870&p=45950#p45950

I have set 2 dummy devices with Output Data Type: Temp/Hum/Baro to create 3 task values.

After rebooting, the Output Data Type changes to Single whilst there are 4 task values all of a sudden.

Changing the Output Data Type for 1 of the 2 Dummy tasks back to Output Data Type: Temp/Hum/Baro fixes it immediately for both dummy tasks. If I then reboot again, same problem appears.

If I edit the faulthy dummy task, and press submit like shown in the last screenshot, my settings are gone and the output data type goes back to single.

[TD-er]

This is a known bug, which will also occur when you switch the number of output values on the system info plugin AND have multiple tasks set to use this plugin.