Cleaned up test config

spec/factories.rb

@@ -9,26 +9,3 @@
     repository_url  'https://github.com/rails/rails'
   end
 end
-
-# ApiKey
-# AuthToken
-# Dependency
-# GithubContribution
-# GithubOrganisation
-# GithubRepository
-# GithubTag
-# GithubUser
-# Manifest
-# ProjectMute
-# ProjectSuggestion
-# Project
-# Readme
-# Recommendable
-# RepositoryDependency
-# RepositoryPermission
-# RepositorySubscription
-# SubscriptionPlan
-# Subscription
-# User
-# Version
-# WebHook

spec/rails_helper.rb

@@ -1,44 +1,16 @@
-# This file is copied to spec/ when you run 'rails generate rspec:install'
 ENV['RAILS_ENV'] ||= 'test'
 require File.expand_path('../../config/environment', __FILE__)
-# Prevent database truncation if the environment is production
+
 abort("The Rails environment is running in production mode!") if Rails.env.production?
 require 'spec_helper'
 require 'rspec/rails'
-# Add additional requires below this line. Rails is not loaded until this point!
 
 Dir[Rails.root.join('spec/support/**/*.rb')].each { |f| require f }
 
-# Checks for pending migration and applies them before tests are run.
-# If you are not using ActiveRecord, you can remove this line.
 ActiveRecord::Migration.maintain_test_schema!
 
 RSpec.configure do |config|
-  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
-  config.fixture_path = "#{::Rails.root}/spec/fixtures"
-
-  # If you're not using ActiveRecord, or you'd prefer not to run each of your
-  # examples within a transaction, remove the following line or assign false
-  # instead of true.
-  config.use_transactional_fixtures = true
-
-  # RSpec Rails can automatically mix in different behaviours to your tests
-  # based on their file location, for example enabling you to call `get` and
-  # `post` in specs under `spec/controllers`.
-  #
-  # You can disable this behaviour by removing the line below, and instead
-  # explicitly tag your specs with their type, e.g.:
-  #
-  #     RSpec.describe UsersController, :type => :controller do
-  #       # ...
-  #     end
-  #
-  # The different available types are documented in the features, such as in
-  # https://relishapp.com/rspec/rspec-rails/docs
   config.infer_spec_type_from_file_location!
 
-  # Filter lines from Rails gems in backtraces.
   config.filter_rails_from_backtrace!
-  # arbitrary gems may also be filtered via:
-  # config.filter_gems_from_backtrace("gem name")
 end

spec/spec_helper.rb

@@ -1,95 +1,12 @@
 require 'coveralls'
 Coveralls.wear!('rails')
 
-# This file was generated by the `rails generate rspec:install` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# The generated `.rspec` file contains `--require spec_helper` which will cause
-# this file to always be loaded, without a need to explicitly require it in any
-# files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# The `.rspec` file also contains a few flags that are not defaults but that
-# users commonly want.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
 RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
   config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
     expectations.include_chain_clauses_in_custom_matcher_descriptions = true
   end
 
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
   config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
     mocks.verify_partial_doubles = true
   end
-
-# The settings below are suggested to provide a good initial experience
-# with RSpec, but feel free to customize to your heart's content.
-=begin
-  # These two settings work together to allow you to limit a spec run
-  # to individual examples or groups you care about by tagging them with
-  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
-  # get run.
-  config.filter_run :focus
-  config.run_all_when_everything_filtered = true
-
-  # Allows RSpec to persist some state between runs in order to support
-  # the `--only-failures` and `--next-failure` CLI options. We recommend
-  # you configure your source control system to ignore this file.
-  config.example_status_persistence_file_path = "spec/examples.txt"
-
-  # Limits the available syntax to the non-monkey patched syntax that is
-  # recommended. For more details, see:
-  #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  config.disable_monkey_patching!
-
-  # Many RSpec users commonly either run the entire suite or an individual
-  # file, and it's useful to allow more verbose output when running an
-  # individual spec file.
-  if config.files_to_run.one?
-    # Use the documentation formatter for detailed output,
-    # unless a formatter has already been configured
-    # (e.g. via a command-line flag).
-    config.default_formatter = 'doc'
-  end
-
-  # Print the 10 slowest examples and example groups at the
-  # end of the spec run, to help surface which specs are running
-  # particularly slow.
-  config.profile_examples = 10
-
-  # Run specs in random order to surface order dependencies. If you find an
-  # order dependency and want to debug it, you can fix the order by providing
-  # the seed, which is printed after each run.
-  #     --seed 1234
-  config.order = :random
-
-  # Seed global randomization in this process using the `--seed` CLI option.
-  # Setting this allows you to use `--seed` to deterministically reproduce
-  # test failures related to randomization by passing the same `--seed` value
-  # as the one that triggered the failure.
-  Kernel.srand config.seed
-=end
 end

spec/support/factory_girl.rb

@@ -4,7 +4,6 @@
   config.before(:suite) do
     begin
       DatabaseCleaner.start
-      FactoryGirl.lint
     ensure
       DatabaseCleaner.clean
     end