/
Bliss-Box 4-Play GEN_6 Port 4.cfg
45 lines (38 loc) · 1.74 KB
/
Bliss-Box 4-Play GEN_6 Port 4.cfg
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
# Bliss-Box 4-Play - http://skunx7.wixsite.com/bliss-box
# Firmware v2.225 - http://skunx7.wixsite.com/bliss-box/downloads - https://anyfile.255bits.com/wix/download?id=6c071e5f82a0bf863c94bd1b5febc230
input_driver = "udev"
input_device = "Bliss-Box 4-Play GEN_6"
input_device_display_name = "4-Play P4 GEN_6"
# Hex vid:pid is found using "dmesg -w" or "tail -f /var/log/syslog" and converted to Decimal using http://www.binaryhexconverter.com/hex-to-decimal-converter
# Hex vid:pid = 16d0:0d07 -> Decimal vid:pid = 5840:3335
input_vendor_id = "5840"
input_product_id = "3335"
input_b_btn = "2"
input_y_btn = "1"
input_select_btn = "5"
input_start_btn = "6"
input_a_btn = "10"
input_x_btn = "4"
input_l_btn = "3"
input_r_btn = "9"
input_b_btn_label = "B"
input_y_btn_label = "A"
input_select_btn_label = "Mode"
input_start_btn_label = "Start"
input_a_btn_label = "C"
input_x_btn_label = "Y"
input_l_btn_label = "X"
input_r_btn_label = "Z"
input_up_axis = "-1"
input_down_axis = "+1"
input_left_axis = "-0"
input_right_axis = "+0"
input_up_btn_label = "D-Pad Up"
input_down_btn_label = "D-Pad Down"
input_left_btn_label = "D-Pad Left"
input_right_btn_label = "D-Pad Right"
# -------------------------------------------------------------------------------------------------------------------------------------------------
# If RetroArch does NOT detect the controller when connected and port has been reset,
# fix it by adding this udev rule (the line below WITHOUT the # symbol at the beginning!) to "/etc/udev/rules.d/10-local.rules" and reboot.
# SUBSYSTEM=="usb", ATTRS{idVendor}=="16d0", MODE="0666"
# -------------------------------------------------------------------------------------------------------------------------------------------------