Common Configuration
This page contains settings which are used common for all three modes (Tracker, iGate and Digipeater)
IMPORTANT: Don't forget to click on the "Update" button after making any changes to the options.
| Option | Description |
|---|---|
| Debug | Enables detailed logging to Serial Console. |
| Device Mode | Select Tracker, iGate or Digi (Default is Tracker) to change the device mode. |
| Metric System | Disable this option if you need Imperial units this option does not affect calculations. Visual only, no effect on calculations |
| Temperature Sensor Correction (Celcius) | If you want to use the on-board temperature sensor as an ambient sensor, you need to calibrate it using this correction value. |
| Humidity Sensor Correction (%) | If you want to use the on-board humidity sensor as an ambient sensor, you need to calibrate it using this correction value. |
| Option | Description |
|---|---|
| Always On | If false it will turn on the screen only when TX or RX |
| Display Timeout (secs) | Time before turning it off after transmitting or receiving a packet |
| Turn 180: | Turn 180 degrees the OLED screen |
Do not change the LoRa parameters above. These are standard parameters required for the LoRa APRS system, and most LoRa APRS devices run with these parameters. Especially, do not change the Power value. The SX1268 module has a maximum value of 22 dBm, but the LightTracker Plus LoRa module has a built-in LNA, amplifying it to 30 dBm.