New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Fatal exception (28): #7
Comments
the address points the the basic ESP functions (0x401xxxxx) do you run the server or client example? |
It's the client example file, and I don't get any more information when activating the debug. But I did once, because it actually worked once this time when starting from scratch and had to change to another ESP module because I forgot to lower the baudrate in the example to something the windows Arduino IDE manages to do, 916200 is apparently to high. Well anyway, the first time with the new board and uncommented DEBUG actually gave me an access and proper handshake to echo.websocket.org, with lots of DEBUG information so that seemed to work at least. But Im back on the same error now :( |
may something with you flash/upload process is wrong. |
Actually I used the json link for installing the esp8266 package, so then I have an old version I guess, will try to build from source instead. |
Having same issue. Have you had any luck? @jandren |
I have done a full test if the client example with the latest git version of ESP8266, and i cant get any exception. |
Thanks for the reply. I tried many things to get this to work. [SETUP] BOOT WAIT 4... Exception (28): ctx: cont
ets Jan 8 2013,rst cause:1, boot mode:(3,7) load 0x4010f000, len 1464, room 16 |
I got it to work. In WebSocketclient sketch: |
ok, that was my bad have fixed long ago in my test file but seams forget copy it bay to the examples. Thanks for the feedback. |
It compiles and uploads just fine but, something goes quite wrong when running...
Any idea of what it could be?
Running W7, Arduino IDE 1.6.5 and downloaded the sources for both ESP8266/Arduino and the arduinoWebSockets today 2015-07-15 so new sources.
[SETUP] BOOT WAIT 4...
scandone
[SETUP] BOOT WAIT 3...
add 0
aid 3
pm open phy_2,type:2 0 0
cnt
connected with TP-LINK_CB4DE8, channel 6
dhcp client start...
ip:192.168.1.100,mask:255.255.255.0,gw:192.168.1.1
[SETUP] BOOT WAIT 2...
[SETUP] BOOT WAIT 1...
Fatal exception (28):
epc1=0x40102180, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00001c20, depc=0x00000000
Fatal exception (28):
epc1=0x40102052, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00001c24, depc=0x00000000
Fatal exception (28):
epc1=0x40102052, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00001c24, depc=0x00000000
Fatal exception (28):
epc1=0x40102052, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00001c24, depc=0x00000000
Fatal exception (28):
epc1=0x40102052, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00001c24, depc=0x00000000
Fatal exception (28):
epc1=0x40102052, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00001c24, depc=0x00000000
Fatal exception (28):
epc1=0x40102052, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00001c24, depc=0x00000000
Fatal exception (28):
epc1=0x40102052, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00001c24, depc=0x00000000
Fatal exception (28):
epc1=0x40102052, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00001c24, depc=0x00000000
$�epc1
ets Jan 8 2013,rst cause:4, boot mode:(3,0)
wdt reset
The text was updated successfully, but these errors were encountered: