RFE: extend executable name filter to user, task, exclude #54
Assignees
Comments
pcmoore
pushed a commit
that referenced
this issue
Sep 5, 2017
…ple times The goto_chain termination action takes a reference of a chain. In that case, there is an issue when block_put is called tcf_chain_destroy directly. The follo-up call of tcf_chain_put by goto_chain action free works with memory that is already freed. This was caught by kasan: [ 220.337908] BUG: KASAN: use-after-free in tcf_chain_put+0x1b/0x50 [ 220.344103] Read of size 4 at addr ffff88036d1f2cec by task systemd-journal/261 [ 220.353047] CPU: 0 PID: 261 Comm: systemd-journal Not tainted 4.13.0-rc5jiri+ #54 [ 220.360661] Hardware name: Mellanox Technologies Ltd. Mellanox switch/Mellanox x86 mezzanine board, BIOS 4.6.5 08/02/2016 [ 220.371784] Call Trace: [ 220.374290] <IRQ> [ 220.376355] dump_stack+0xd5/0x150 [ 220.391485] print_address_description+0x86/0x410 [ 220.396308] kasan_report+0x181/0x4c0 [ 220.415211] tcf_chain_put+0x1b/0x50 [ 220.418949] free_tcf+0x95/0xc0 So allow tcf_chain_destroy to be called multiple times, free only in case the reference count drops to 0. Fixes: 5bc1701 ("net: sched: introduce multichain support for filters") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
pcmoore
pushed a commit
that referenced
this issue
Sep 5, 2017
tcf_chain_flush needs to be called with RTNL. However, on
free_tcf->
tcf_action_goto_chain_fini->
tcf_chain_put->
tcf_chain_destroy->
tcf_chain_flush
callpath, it is called without RTNL.
This issue was notified by following warning:
[ 155.599052] WARNING: suspicious RCU usage
[ 155.603165] 4.13.0-rc5jiri+ #54 Not tainted
[ 155.607456] -----------------------------
[ 155.611561] net/sched/cls_api.c:195 suspicious rcu_dereference_protected() usage!
Since on this callpath, the chain is guaranteed to be already empty
by check in tcf_chain_put, move the tcf_chain_flush call out and call it
only where it is needed - into tcf_block_put.
Fixes: db50514 ("net: sched: add termination action to allow goto chain")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pcmoore
pushed a commit
that referenced
this issue
Sep 5, 2017
The commit below added a call to the ->destroy() callback for all qdiscs which failed in their ->init(), but some were not prepared for such change and can't handle partially initialized qdisc. HTB is one of them and if any error occurs before the qdisc watchdog timer and qdisc work are initialized then we can hit either a null ptr deref (timer->base) when canceling in ->destroy or lockdep error info about trying to register a non-static key and a stack dump. So to fix these two move the watchdog timer and workqueue init before anything that can err out. To reproduce userspace needs to send broken htb qdisc create request, tested with a modified tc (q_htb.c). Trace log: [ 2710.897602] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2710.897977] IP: hrtimer_active+0x17/0x8a [ 2710.898174] PGD 58fab067 [ 2710.898175] P4D 58fab067 [ 2710.898353] PUD 586c0067 [ 2710.898531] PMD 0 [ 2710.898710] [ 2710.899045] Oops: 0000 [#1] SMP [ 2710.899232] Modules linked in: [ 2710.899419] CPU: 1 PID: 950 Comm: tc Not tainted 4.13.0-rc6+ #54 [ 2710.899646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 2710.900035] task: ffff880059ed2700 task.stack: ffff88005ad4c000 [ 2710.900262] RIP: 0010:hrtimer_active+0x17/0x8a [ 2710.900467] RSP: 0018:ffff88005ad4f960 EFLAGS: 00010246 [ 2710.900684] RAX: 0000000000000000 RBX: ffff88003701e298 RCX: 0000000000000000 [ 2710.900933] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88003701e298 [ 2710.901177] RBP: ffff88005ad4f980 R08: 0000000000000001 R09: 0000000000000001 [ 2710.901419] R10: ffff88005ad4f800 R11: 0000000000000400 R12: 0000000000000000 [ 2710.901663] R13: ffff88003701e298 R14: ffffffff822a4540 R15: ffff88005ad4fac0 [ 2710.901907] FS: 00007f2f5e90f740(0000) GS:ffff88005d880000(0000) knlGS:0000000000000000 [ 2710.902277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2710.902500] CR2: 0000000000000000 CR3: 0000000058ca3000 CR4: 00000000000406e0 [ 2710.902744] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2710.902977] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2710.903180] Call Trace: [ 2710.903332] hrtimer_try_to_cancel+0x1a/0x93 [ 2710.903504] hrtimer_cancel+0x15/0x20 [ 2710.903667] qdisc_watchdog_cancel+0x12/0x14 [ 2710.903866] htb_destroy+0x2e/0xf7 [ 2710.904097] qdisc_create+0x377/0x3fd [ 2710.904330] tc_modify_qdisc+0x4d2/0x4fd [ 2710.904511] rtnetlink_rcv_msg+0x188/0x197 [ 2710.904682] ? rcu_read_unlock+0x3e/0x5f [ 2710.904849] ? rtnl_newlink+0x729/0x729 [ 2710.905017] netlink_rcv_skb+0x6c/0xce [ 2710.905183] rtnetlink_rcv+0x23/0x2a [ 2710.905345] netlink_unicast+0x103/0x181 [ 2710.905511] netlink_sendmsg+0x326/0x337 [ 2710.905679] sock_sendmsg_nosec+0x14/0x3f [ 2710.905847] sock_sendmsg+0x29/0x2e [ 2710.906010] ___sys_sendmsg+0x209/0x28b [ 2710.906176] ? do_raw_spin_unlock+0xcd/0xf8 [ 2710.906346] ? _raw_spin_unlock+0x27/0x31 [ 2710.906514] ? __handle_mm_fault+0x651/0xdb1 [ 2710.906685] ? check_chain_key+0xb0/0xfd [ 2710.906855] __sys_sendmsg+0x45/0x63 [ 2710.907018] ? __sys_sendmsg+0x45/0x63 [ 2710.907185] SyS_sendmsg+0x19/0x1b [ 2710.907344] entry_SYSCALL_64_fastpath+0x23/0xc2 Note that probably this bug goes further back because the default qdisc handling always calls ->destroy on init failure too. Fixes: 87b60cf ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1 ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
|
Kernel patch submitted: Userspace support: Test suite patch: |
|
I had a quick look at the userspace and testsuite patches and I don't
have any concerns.
|
pcmoore
changed the title
|
See the audit-userspace PR, we need a positive nod from Steve before I'm going to merge the kernel piece. |
pcmoore
pushed a commit
that referenced
this issue
Jun 19, 2018
This patch removes the restriction of the AUDIT_EXE field to only
SYSCALL filter and teaches audit_filter to recognize this field.
This makes it possible to write rule lists such as:
auditctl -a exit,always [some general rule]
# Filter out events with executable name /bin/exe1 or /bin/exe2:
auditctl -a exclude,always -F exe=/bin/exe1
auditctl -a exclude,always -F exe=/bin/exe2
See: #54
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
Upstream since 4.19-rc1 29c1372 ("audit: allow other filter list types for AUDIT_EXE") |
pcmoore
pushed a commit
that referenced
this issue
May 8, 2023
Commit 4fe8158 ("ixgbe: let the xdpdrv work with more than 64 cpus") adds support to allow XDP programs to run on systems with more than 64 CPUs by locking the XDP TX rings and indexing them using cpu % 64 (IXGBE_MAX_XDP_QS). Upon trying this out patch on a system with more than 64 cores, the kernel paniced with an array-index-out-of-bounds at the return in ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example splat: ========================================================================== UBSAN: array-index-out-of-bounds in /var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26 index 65 is out of range for type 'ixgbe_ring *[64]' ========================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 65 PID: 408 Comm: ksoftirqd/65 Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020 RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe] Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9 00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7 47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0 RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282 RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000 RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000 RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001 R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000 R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ixgbe_poll+0x103e/0x1280 [ixgbe] ? sched_clock_cpu+0x12/0xe0 __napi_poll+0x30/0x160 net_rx_action+0x11c/0x270 __do_softirq+0xda/0x2ee run_ksoftirqd+0x2f/0x50 smpboot_thread_fn+0xb7/0x150 ? sort_range+0x30/0x30 kthread+0x127/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x30 </TASK> I think this is how it happens: Upon loading the first XDP program on a system with more than 64 CPUs, ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However, immediately after this, the rings are reconfigured by ixgbe_setup_tc. ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop. ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if it is non-zero. Commenting out the decrement in ixgbe_free_q_vector stopped my system from panicing. I suspect to make the original patch work, I would need to load an XDP program and then replace it in order to get ixgbe_xdp_locking_key back above 0 since ixgbe_setup_tc is only called when transitioning between XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is incremented every time ixgbe_xdp_setup is called. Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems with more than 64 CPUs. Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied to the number of CPUs present, there is no reason to disable it upon unloading an XDP program. To avoid confusion, I have moved enabling ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path. Fixes: 4fe8158 ("ixgbe: let the xdpdrv work with more than 64 cpus") Signed-off-by: John Hickey <jjh@daedalian.us> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230425170308.2522429-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Currently, the filter on executable file name is limited to the exit filter. Was there a good reason to limit it to this filter and can it be extended for use by user, task and exclude filters?
... audit_field_valid(...) { ... switch(f->type) { ... case AUDIT_EXE: ... if (entry->rule.listnr != AUDIT_FILTER_EXIT) return -EINVAL;The text was updated successfully, but these errors were encountered: