-
Notifications
You must be signed in to change notification settings - Fork 2
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
riscv: Extension parsing fixes #920
Conversation
Upstream branch: ba5ea59 |
Upstream branch: ba5ea59 |
5bfd8e0
to
f1fc9ba
Compare
When the cpus in the same cluster are all in the idle state, the kernel might put the cluster into a deeper low power state. Call the cluster_pm_enter() before entering the low power state and call the cluster_pm_exit() after the cluster woken up. Signed-off-by: Nick Hu <nick.hu@sifive.com> Link: https://lore.kernel.org/r/20240226065113.1690534-1-nick.hu@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti <alexghiti@rivosinc.com> says: patch 1 removes a useless memory barrier and patch 2 actually fixes the issue with IPI in the patching code. * b4-shazam-merge: riscv: Fix text patching when IPI are used riscv: Remove superfluous smp_mb() Link: https://lore.kernel.org/r/20240229121056.203419-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
…USH_CTX prctl" Charlie Jenkins <charlie@rivosinc.com> says: Improve the performance of icache flushing by creating a new prctl flag PR_RISCV_SET_ICACHE_FLUSH_CTX. The interface is left generic to allow for future expansions such as with the proposed J extension [1]. Documentation is also provided to explain the use case. Patch sent to add PR_RISCV_SET_ICACHE_FLUSH_CTX to man-pages [2]. [1] https://github.com/riscv/riscv-j-extension [2] https://lore.kernel.org/linux-man/20240124-fencei_prctl-v1-1-0bddafcef331@rivosinc.com * b4-shazam-merge: cpumask: Add assign cpu documentation: Document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl riscv: Include riscv_set_icache_flush_ctx prctl riscv: Remove unnecessary irqflags processor.h include Link: https://lore.kernel.org/r/20240312-fencei-v13-0-4b6bdc2bbf32@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
IS_ENABLED(CONFIG_64BIT) in initialization of pgtable_l{4,5}_enabled is redundant, remove it. Signed-off-by: Dawei Li <dawei.li@shingroup.cn> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240320064712.442579-2-dawei.li@shingroup.cn Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
pgtable_l{4,5}_enabled are read only after initialization, make explicit annotation of __ro_after_init on them. Signed-off-by: Dawei Li <dawei.li@shingroup.cn> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240320064712.442579-3-dawei.li@shingroup.cn Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
…ired After commit f51f7a0 ("riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent"), for non-coherent platforms with less than 4GB memory, we rely on users to pass "swiotlb=mmnn,force" kernel parameters to enable DMA bouncing for unaligned kmalloc() buffers. Now let's go further: If no bouncing needed for ZONE_DMA, let kernel automatically allocate 1MB swiotlb buffer per 1GB of RAM for kmalloc() bouncing on non-coherent platforms, so that no need to pass "swiotlb=mmnn,force" any more. The math of "1MB swiotlb buffer per 1GB of RAM for kmalloc() bouncing" is taken from arm64. Users can still force smaller swiotlb buffer by passing "swiotlb=mmnn". Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240325110036.1564-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jisheng Zhang <jszhang@kernel.org> says: This series selects ARCH_USE_CMPXCHG_LOCKREF to enable the cmpxchg-based lockless lockref implementation for riscv. Then, implement arch_cmpxchg64_{relaxed|acquire|release}. After patch1: Using Linus' test case[1] on TH1520 platform, I see a 11.2% improvement. On JH7110 platform, I see 12.0% improvement. After patch2: on both TH1520 and JH7110 platforms, I didn't see obvious performance improvement with Linus' test case [1]. IMHO, this may be related with the fence and lr.d/sc.d hw implementations. In theory, lr/sc without fence could give performance improvement over lr/sc plus fence, so add the code here to leave performance improvement room on newer HW platforms. * b4-shazam-merge: riscv: cmpxchg: implement arch_cmpxchg64_{relaxed|acquire|release} riscv: select ARCH_USE_CMPXCHG_LOCKREF Link: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 [1] Link: https://lore.kernel.org/r/20240325111038.1700-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, riscv linux requires at least IMA, so all platforms have a multiplier. And I assume the 'mul' efficiency is comparable or better than a sequence of five or so register-dependent arithmetic instructions. Select ARCH_HAS_FAST_MULTIPLIER to get slightly nicer codegen. Refer to commit f9b4192 ("[PATCH] bitops: hweight() speedup") for more details. In a simple benchmark test calling hweight64() in a loop, it got: about 14% performance improvement on JH7110, tested on Milkv Mars. about 23% performance improvement on TH1520 and SG2042, tested on Sipeed LPI4A and SG2042 platform. a slight performance drop on CV1800B, tested on milkv duo. Among all riscv platforms in my hands, this is the only one which sees a slight performance drop. It means the 'mul' isn't quick enough. However, the situation exists on x86 too, for example, P4 doesn't have fast integer multiplies as said in the above commit, x86 also selects ARCH_HAS_FAST_MULTIPLIER. So let's select ARCH_HAS_FAST_MULTIPLIER which can benefit almost riscv platforms. Samuel also provided some performance numbers: On Unmatched: 20% speedup for __sw_hweight32 and 30% speedup for __sw_hweight64. On D1: 8% speedup for __sw_hweight32 and 8% slowdown for __sw_hweight64. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Samuel Holland <samuel.holland@sifive.com> Tested-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240325105823.1483-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Upstream branch: 0a16a17 |
f1fc9ba
to
6167b34
Compare
Upstream branch: 0a16a17 |
6167b34
to
54e22df
Compare
Upstream branch: 0a16a17 |
The riscv_cpuinfo struct that contains mvendorid and marchid is not populated until all harts are booted which happens after the DT parsing. Use the mvendorid/marchid from the boot hart to determine if the DT contains an invalid V. Fixes: d82f322 ("RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs") Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
This loop is supposed to check if ext->subset_ext_ids[j] is valid, rather than if ext->subset_ext_ids[i] is valid, before setting the extension id ext->subset_ext_ids[j] in isainfo->isa. Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Fixes: 0d8295e ("riscv: add ISA extension parsing for scalar crypto") Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
54e22df
to
141d385
Compare
Pull request for series with
subject: riscv: Extension parsing fixes
version: 1
url: https://patchwork.kernel.org/project/linux-riscv/list/?series=847525