regression: touchscreen functionality lost in Panasonic Toughbook CF-C2A #155
Comments
|
Note that I still have both the CF-C2A and the CF-C2C laptops available for any testing that's needed. |
|
As I mentioned on the downstream Clear Linux bug report, the update from 31070 to 31080 changes the Linux kernel from 5.2.16-835 to 5.2.17-836, and introduces a change to the Wacom kernel driver. To test if this change is the source of the issue, I would recommend performing the following steps.
If the 1st commit doesn't work, or the 2nd commit does, then we'll need to cast a bit wider net to see if some other change introduced the problem. You can, of course, try running steps 3 - 11 multiple times if you want to be sure that the 1st commit works fine and the 2nd commit breaks things. If the 2nd commit does indeed appear to be the source of the trouble, we'll need to work with you to understand why exactly it is causing problems for your particular touchscreen. |
|
See also https://bugzilla.redhat.com/show_bug.cgi?id=1754031 and #121 for other "failed with error -22" bugs reported for Wacom touchscreens that could be related. |
|
One key difference from those two bugs is that stylus input still works perfectly normally. I will gladly try out your instructions above. |
|
Good news. I've confirmed that when I build the module with the githash you give in 3, it works. When I rebuild it with the githash you give in 7, it breaks again. So hopefully that info helps, and this also gives me a good workaround for the immediate term. Also interesting... My distro had kernel module signing enforcement by default, and I had to figure out how to turn that off. But before I figured that out, when I rebooted and the kernel refused to load the wacom driver, it fell back to hid-generic and the touchscreen and stylus both seemed to work fine. I didn't test extensively, but basic stuff like touching and dragging worked. Let me know if there's any other useful testing I can do. |
|
Thanks for the quick test results. Can you next run our sysinfo.sh script and attach the generated tarball here? It will provide some additional information about your system and sensor that may be helpful. Getting results fromboth the working and broken versions would be ideal. |
|
Here's the results when running the working driver from git. Here's the results after installing the non-working driver version from git and rebooting. Were you also wanting results from the other hardware, that doesn't error with either driver? |
|
Sorry for the delay in getting back to you. I've been looking at this and have a theory for what the source of the bug is. Before I go too much further down the path though, I'd like to get some additional debug info from you. If you still have the "input-wacom" directory from earlier available, please run the following commands inside it to checkout my debug modifications: With the |
|
dmesg.log |
|
Thanks, that's helped significantly. I've pushed a new commit which should hopefully fix the issue. You can get the updated code by running the following commands. Afterwards, follow the previous instructions to rebuild the driver, clear dmesg, and reload the driver. Touch should hopefully work now. If not, save and attach the new dmesg output for review. |
|
I rebuilt and loaded, and touch was restored. Thanks! |
|
The |
jigpu
added a commit
to jigpu/input-wacom
that referenced
this issue
Mar 23, 2020
We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Ref: linuxwacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> CC: stable@vger.kernel.org # 5.3+
|
I've pushed up a new branch with the code that I'm planning on sending up to the kernel. In addition to your fix it also has a fix for another touch-related bug. Please do the following to switch to the new branch and then rebuild/reinstall the driver to test that it works correctly. |
jigpu
added a commit
to jigpu/input-wacom
that referenced
this issue
Mar 23, 2020
We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Ref: linuxwacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+
|
I'm sorry, I must have missed the email notification for this one. I can confirm that this still works for me! |
jigpu
added a commit
that referenced
this issue
Apr 3, 2020
We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: #155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [jason.gerecke@wacom.com: Imported into input-wacom (778fbf417999)] Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
jigpu
added a commit
that referenced
this issue
Apr 3, 2020
… devices We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: #155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [jason.gerecke@wacom.com: Imported into input-wacom (778fbf417999)] Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> [jason.gerecke@wacom.com: Backported from input-wacom (ca58e00)] Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
|
Thanks! The fix was accepted upstream, and should be available in the following releases (whenever they are actually made):
|
ruscur
pushed a commit
to ruscur/linux
that referenced
this issue
Apr 4, 2020
We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This was referenced Apr 20, 2020
mseaster-wr
pushed a commit
to WindRiver-Labs/linux-yocto-5.2
that referenced
this issue
May 11, 2020
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
mrchapp
pushed a commit
to mrchapp/linux
that referenced
this issue
May 13, 2020
commit 778fbf4 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mrchapp
pushed a commit
to mrchapp/linux
that referenced
this issue
May 13, 2020
commit 778fbf4 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MilhouseVH
pushed a commit
to MilhouseVH/linux
that referenced
this issue
May 14, 2020
commit 778fbf4 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MilhouseVH
pushed a commit
to MilhouseVH/linux
that referenced
this issue
May 14, 2020
commit 778fbf4 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
woodsts
pushed a commit
to woodsts/linux-stable
that referenced
this issue
May 14, 2020
commit 778fbf4 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cesfahani
pushed a commit
to cesfahani/ubuntu-focal-ga401i
that referenced
this issue
Jun 24, 2020
BugLink: https://bugs.launchpad.net/bugs/1878649 commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Khalid Elmously <khalid.elmously@canonical.com>
RenderBroken
pushed a commit
to RenderBroken/op7-kernel
that referenced
this issue
Aug 6, 2020
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
miraclestars
pushed a commit
to miraclestars/android_kernel_samsung_sm8250
that referenced
this issue
Aug 15, 2020
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Claymore1297
pushed a commit
to Claymore1297/kernel_oneplus_sm8150
that referenced
this issue
Aug 18, 2020
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KenHV
pushed a commit
to KenHV/kensur_kernel_liber
that referenced
this issue
Oct 9, 2020
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
javashin
pushed a commit
to javashin/msm-4.14
that referenced
this issue
Dec 17, 2020
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
freeza-inc
pushed a commit
to freeza-inc/bm-galaxy-s20-ultra-snap-r
that referenced
this issue
Dec 23, 2020
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
miraclestars
pushed a commit
to miraclestars/android_kernel_samsung_sm8250
that referenced
this issue
Jan 1, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jimbo77
pushed a commit
to Jimbo77/Jimbok_common_sm8250-R
that referenced
this issue
Jan 16, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ThunderStorms21th
pushed a commit
to ThunderStorms21th/Galaxy-S10
that referenced
this issue
Mar 25, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gamer13433
pushed a commit
to gamer13433/Universal9611_M21_devel
that referenced
this issue
May 5, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
soulr344
pushed a commit
to TotsukaINC/android_kernel_universal_my1nsxx
that referenced
this issue
May 5, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TenSeventy7
pushed a commit
to FreshROMs/android_kernel_samsung_exynos9610_mint
that referenced
this issue
May 17, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TenSeventy7
pushed a commit
to FreshROMs/android_kernel_samsung_exynos9610_mint
that referenced
this issue
May 21, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kartikbhalla12
pushed a commit
to kartikbhalla12/HyperX-X2
that referenced
this issue
Jun 8, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sergoops
pushed a commit
to sergoops/kernel_realme_sm6150
that referenced
this issue
Sep 1, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TenSeventy7
pushed a commit
to FreshROMs/android_kernel_samsung_exynos9610_mint
that referenced
this issue
Oct 17, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John Vincent <git@tensevntysevn.cf>
TenSeventy7
pushed a commit
to FreshROMs/android_kernel_samsung_exynos9610_mint
that referenced
this issue
Oct 30, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John Vincent <git@tensevntysevn.cf>
TenSeventy7
pushed a commit
to FreshROMs/android_kernel_samsung_exynos9610_mint
that referenced
this issue
Oct 30, 2021
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John Vincent <git@tensevntysevn.cf>
krazey
pushed a commit
to krazey/android_kernel_motorola_exynos9610
that referenced
this issue
May 6, 2022
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hectorvax
pushed a commit
to hectorvax/sweet-r-kernel
that referenced
this issue
Dec 15, 2022
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bggRGjQaUbCoE
pushed a commit
to bggRGjQaUbCoE/android_kernel_samsung_sm8250-mohammad92
that referenced
this issue
Apr 5, 2023
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GiovanYCringe
pushed a commit
to GiovanYCringe-Experiments/kernel_a50
that referenced
this issue
Jul 3, 2023
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John Vincent <git@tensevntysevn.cf> Signed-off-by: John Vincent <git@tenseventyseven.cf>
GiovanYCringe
pushed a commit
to GiovanYCringe-Experiments/kernel_a50
that referenced
this issue
Jul 3, 2023
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Meghthedev
pushed a commit
to Meghthedev/kernel_samsung_m30s
that referenced
this issue
Aug 25, 2023
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
theshoqanebi
pushed a commit
to theshoqanebi/android_samsung_m12_kernel
that referenced
this issue
Nov 25, 2023
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shas45558
pushed a commit
to Shas45558/shas-dream-oc-mt6768
that referenced
this issue
Dec 27, 2023
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rrsetofamuris
pushed a commit
to rrsetofamuris/codespaces
that referenced
this issue
Jan 4, 2024
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rrsetofamuris
pushed a commit
to rrsetofamuris/codespaces
that referenced
this issue
Jan 8, 2024
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XxViRUsPRO
pushed a commit
to XxViRUsPRO/android_kernel_samsung_c2q
that referenced
this issue
May 6, 2024
commit 778fbf4179991e7652e97d7f1ca1f657ef828422 upstream. We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: linuxwacom/input-wacom#155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I have a touchscreen laptop that has had multiple hardware revisions. Between September 20, 2019 and September 23, 2019, (from revision 31070 to 31080), the distro I've been using, Clear Linux, stops working with the touchscreen, but only on the CF-C2A unit. The later hardware revision (which has a different usbid for the wacom device) keeps working fine. I've also seen the touchscreen go from not working to working in older and newer releases of other distros, and if desired, I could do more detailed testing on another distro to try to figure out when it breaks.
As of revision 31080, finger-touch stops working on the Panasonic CF-C2A laptop, but still works fine on the CF-C2C (hardware revision of the same model laptop). Stylus input still works either way.
In revisions 31070 and prior, finger-touch works fine on both units.
The multitouch sensor on the A unit has a usb id of 056a:0101
The multitouch sensor on the C unit has a usb id of 056a:0117
I have already made a ticket downstream on the Clear Linux project, at clearlinux/distribution#1808 which contains lsmod output, a comparison of dmesg output, and a link to the release notes for the clear linux update. Sadly those release notes have no mention of wacom.
The most notable part is the difference in dmesg output from the wacom driver. On the earlier, working revision, I see:
6.585001] calling wacom_driver_init+0x0/0x1000 [wacom] @ 377 [ 6.587126] input: Wacom ISDv4 101 Pen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:0101.0003/input/input11 [ 6.587587] wacom 0003:056A:0101.0003: hidraw0: USB HID v1.11 Device [Wacom Co.,Ltd. Pen and MultiTouch Sensor ] on usb-0000:00:1a.0-1.5/input0 [ 6.589117] input: Wacom ISDv4 101 Finger as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:056A:0101.0004/input/input15 [ 6.589234] wacom 0003:056A:0101.0004: hidraw2: USB HID v1.11 Mouse [Wacom Co.,Ltd. Pen and MultiTouch Sensor ] on usb-0000:00:1a.0-1.5/input1 [ 6.589269] initcall wacom_driver_init+0x0/0x1000 [wacom] returned 0 after 4158 usecsOn the later, broken revision, I see:
6.956628] calling wacom_driver_init+0x0/0x1000 [wacom] @ 382 [ 6.960998] input: Wacom ISDv4 101 Pen as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:056A:0101.0003/input/input11 [ 6.961447] wacom 0003:056A:0101.0003: hidraw0: USB HID v1.11 Device [Wacom Co.,Ltd. Pen and MultiTouch Sensor ] on usb-0000:00:1a.0-1.5/input0 [ 6.963594] wacom: probe of 0003:056A:0101.0004 failed with error -22 [ 6.963611] initcall wacom_driver_init+0x0/0x1000 [wacom] returned 0 after 6362 usecsThe text was updated successfully, but these errors were encountered: