ESP32rs

Simple project to use Rust to program the Lora32 board from Heltec, got from Hackerbox #0066

Uses extensively already made projects (thanks to esp-rs / MabezDev) and made to play.

How to use

Setup

Build Rust for xtensa support:

git clone https://github.com/MabezDev/rust-xtensa
./configure --experimental-targets=Xtensa
./x.py build --stage 2

Note: Will take a LOT of time

I recomment to turn off ninja in config.toml ninja = false

Download the toolchain from Espressif (Link)

WARNING: Take the esp32 one, not esp32s3 one

mkdir ./esp32_toolchain/
tar -xzf ~/Downloads/xtensa-esp32-elf-gcc8_4_0-esp-2020r3-linux-amd64.tar.gz -C ./esp32_toolchain/

Install tools for building / flashing

cargo install cargo-xbuild
cargo install cargo-espflash

Setup bash env to cross compile.

Add this to a file setup.sh (or the name you want)

CUSTOM_RUST_BUILD=/path/to/rust-xtensa

export RUST_BACKTRACE=1

export XARGO_RUST_SRC=$CUSTOM_RUST_BUILD/library
export RUSTC=$CUSTOM_RUST_BUILD/build/x86_64-unknown-linux-gnu/stage2/bin/rustc
export RUSTDOC=$CUSTOM_RUSTC/build/x86_64-unknown-linux-gnu/stage2/bin/rustdoc

export PATH="$PATH:/path/to/esp32_toolchain/xtensa-esp32-elf/bin"

Build

Setup cross compilation environment if not done already

source setup.sh

Then build the binary for the target:

cargo xbuild --features="xtensa-lx-rt/lx6,xtensa-lx/lx6" --target="xtensa-esp32-none-elf"

Flash the board

Flash the ESP32 using the binary

cargo espflash --chip esp32 --speed 460800 --features="xtensa-lx-rt/lx6,xtensa-lx/lx6" /dev/ttyUSB0

Tips

To build and flash the target more easily, add the aliases at the end of setup.sh

alias esp32_build='cargo xbuild --features="xtensa-lx-rt/lx6,xtensa-lx/lx6" --target="xtensa-esp32-none-elf"
alias esp32_flash='cargo espflash --chip esp32 --speed 460800 --features="xtensa-lx-rt/lx6,xtensa-lx/lx6" /dev/ttyUSB0'

To reduce the size of the output binary, strip the binary from un-necessary data:

alias esp32_strip='esp32_toolchain/xtensa-esp32-elf/bin/xtensa-esp32-elf-strip'

The command esp32_strip target/xtensa-esp32-none-elf/release/esp32rs resulted in the reduction of the binary size from 493k to 43k on the blinky example.

To know if your environment is set up for cross compile, add to setup.sh

if [ -z ${CROSSCOMPILE_SET+x} ]; then
export PS1="$PS1\033[95mESP32>\033[0m "
	export CROSSCOMPILE_SET=1
fi

Examples

In order to easily test a lot of different programs inside the same code, the file main.rs hosts everything statically defined (like the CPU freq for exemple). In it, a trait Algo is defined, with a init function (initialize algorithm) and a loop_fct function (called over and over again), Arduino-style. An algorithm is imported as a struct implementing the trait Algo, imported as a mod inside main.rs and called.

Blinky

Simply blinks a LED

OledSimple

Displays a message in the Oled Display embedded in the board Lora32 from Heltec.

TODO

General

• Select program to launch based on Cargo.toml configuration
• Create a UART communication to display messages
  • Optionnally from Cargo.toml
  • On debug build only ?

Blinky

• Validate that we get a second when delaying of CORE_HZ
• Simplify LED pin pick process

OledSimple

• Display image from PNG file (convert at compile time & embed in binary)
• Upgrade dependencies to newer versions
• Experiment with embedded-graphics library to create cool things

Other projects

• Wifi experimentation
• BLE experimentation
• LoRa experimentation