TBS6285 no signal #64
Labels
Comments
|
Unfortunately it looks driver is incapable to correctly initialize some versions (all?) of card. I had same problem and I fixed it by addiding following commands to boot scripts: You should change numbers with your adapters numbers Theoretically you can use any program capable of FULL initialization of card, for example w_scan. BTW for statistics can you post you revision of card (mine is V21, it is written on front side of card) |
|
Hi, sorry for the thread hijack, what distro did you use to successfully build the drivers? When you run a : lspci -v | grep --after-context=10 7160 do you see 'kernel module' loaded? |
ghost
mentioned this issue
|
@Epon |
|
Closing and marking duplicate of #66 |
crazycat69
pushed a commit
to crazycat69/linux_media
that referenced
this issue
May 29, 2021
Similarly to bitmap functions, find_next_*_bit() users will benefit if
we'll handle a case of bitmaps that fit into a single word inline. In the
very best case, the compiler may replace a function call with a few
instructions.
This is the quite typical find_next_bit() user:
unsigned int cpumask_next(int n, const struct cpumask *srcp)
{
/* -1 is a legal arg here. */
if (n != -1)
cpumask_check(n);
return find_next_bit(cpumask_bits(srcp), nr_cpumask_bits, n + 1);
}
EXPORT_SYMBOL(cpumask_next);
Currently, on ARM64 the generated code looks like this:
0000000000000000 <cpumask_next>:
0: a9bf7bfd stp x29, x30, [sp, #-16]!
4: 11000402 add w2, w0, #0x1
8: aa0103e0 mov x0, x1
c: d2800401 mov x1, #0x40 // ljalves#64
10: 910003fd mov x29, sp
14: 93407c42 sxtw x2, w2
18: 94000000 bl 0 <find_next_bit>
1c: a8c17bfd ldp x29, x30, [sp], ljalves#16
20: d65f03c0 ret
24: d503201f nop
After applying this patch:
0000000000000140 <cpumask_next>:
140: 11000400 add w0, w0, #0x1
144: 93407c00 sxtw x0, w0
148: f100fc1f cmp x0, #0x3f
14c: 54000168 b.hi 178 <cpumask_next+0x38> // b.pmore
150: f9400023 ldr x3, [x1]
154: 92800001 mov x1, #0xffffffffffffffff // #-1
158: 9ac02020 lsl x0, x1, x0
15c: 52800802 mov w2, #0x40 // ljalves#64
160: 8a030001 and x1, x0, x3
164: dac00020 rbit x0, x1
168: f100003f cmp x1, #0x0
16c: dac01000 clz x0, x0
170: 1a800040 csel w0, w2, w0, eq // eq = none
174: d65f03c0 ret
178: 52800800 mov w0, #0x40 // ljalves#64
17c: d65f03c0 ret
find_next_bit() call is replaced with 6 instructions. find_next_bit()
itself is 41 instructions plus function call overhead.
Despite inlining, the scripts/bloat-o-meter report smaller .text size
after applying the series:
add/remove: 11/9 grow/shrink: 233/176 up/down: 5780/-6768 (-988)
Link: https://lkml.kernel.org/r/20210401003153.97325-10-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jianpeng Ma <jianpeng.ma@intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
crazycat69
pushed a commit
to crazycat69/linux_media
that referenced
this issue
Jul 1, 2023
'__net_initdata' becomes a no-op with CONFIG_NET_NS=y, but when this option is disabled it becomes '__initdata', which means the data can be freed after the initialization phase. This annotation is obviously incorrect for the devlink net device notifier block which is still registered after the initialization phase [1]. Fix this crash by removing the '__net_initdata' annotation. [1] general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [ljalves#1] PREEMPT SMP CPU: 3 PID: 117 Comm: (udev-worker) Not tainted 6.4.0-rc1-custom-gdf0acdc59b09 ljalves#64 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 RIP: 0010:notifier_call_chain+0x58/0xc0 [...] Call Trace: <TASK> dev_set_mac_address+0x85/0x120 dev_set_mac_address_user+0x30/0x50 do_setlink+0x219/0x1270 rtnl_setlink+0xf7/0x1a0 rtnetlink_rcv_msg+0x142/0x390 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x188/0x270 netlink_sendmsg+0x214/0x470 __sys_sendto+0x12f/0x1a0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: e93c937 ("devlink: change per-devlink netdev notifier to static one") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/netdev/600ddf9e-589a-2aa0-7b69-a438f833ca10@samsung.com/ Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230515162925.1144416-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hi,
With a bit of effort I managed to get the drivers built for the TBS 6285. However, when I start TVHeadend 3.4.27 I can see all the adapters and it will appear to tune to a frequency, but it doesn't find any channels. I've tried both int_type=0 and int_type=1 without success.
The firmware is in /lib/firmware and is taken from bas-t's repository.
I'm using the latest commit from both repositories.
Using the official drivers I can get scan successfully, but they cause my server to crash after a day or so even using int_type=1 (MSI).
I can attach dmesg output if this would be any use?
Any ideas?
The text was updated successfully, but these errors were encountered: