（一）.自动安装： 下载后解压，以root权限运行install.sh，若提示失败，请检查目录是否完整或手动安装
$sudo chmod +x install.sh
$sudo ./install.sh
$reboot
将在重启后生效
（二）.手动安装：
1.下载后解压并make
$ make
2.将得到的i2c-hid.ko复制到指定路径
$ sudo cp /path/to/i2c-hid.ko /lib/modules/$(uname -r)/kernel/drivers/hid/i2c-hid/i2c-hid.ko
3.然后添加i2c_hid.polling_mode=1到内核命令行
使用文本编辑器以root身份打开/ etc / default / grub，然后将
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" 替换为
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i2c_hid.polling_mode=1"
最后保存更改。
4.最后运行
$ sudo update-grub
$ sudo update-initramfs -u
$reboot
将在重启后生效
(1).automatic installation:
After downloading, unzip and run as root install.sh If the prompt fails, please check whether the directory is complete or manually installed
$sudo chmod +x install.sh
$sudo ./install.sh
$reboot
Will take effect after restart
(2).manual installation:
1.Unzip and make after downloading
$make
2.The I2C will be obtained- hid.ko Copy to specified path
3.Then add I2C_ hid.polling_ Mode = 1 to the kernel command line
Open / etc / default / grub as root using a text editor, and then
GRUB_ CMDLINE_ LINUX_ Default = "quiet splash" is replaced by
GRUB_ CMDLINE_ LINUX_ DEFAULT="quiet splash i2c_ hid.polling_ mode=1"
Finally, save the changes.
4.Final operation
$sudo update-grub
$ sudo update-initramfs -u
$reboot
Will take effect after restart