ESP3D 3.0 Status #540
Replies: 23 comments 24 replies
-
|
About file upload, to clarify and avoid recurrent questions, here is what the 3.0 should support in beta, this is an under going and planned work, implementation should follow list order. UPLOAD_DIRECT_SD (implemented) UPLOAD_SHARED_SD (implemented) UPLOAD_SERIAL_SD (implemented in 2.1 but not available yet in 3.0) UPLOAD_FAST_SERIAL_SD (implemented for MKS) UPLOAD_FAST_SERIAL_USB (implemented for MKS) UPLOAD_DIRECT_USB (not started yet, and may be delayed to 3.1, waiting for hardware setup) |
Beta Was this translation helpful? Give feedback.
-
|
There is a mention here that |
Beta Was this translation helpful? Give feedback.
-
|
MKS Robin board , the code in Marlin is in it is also suported for mks tft with wifi module |
Beta Was this translation helpful? Give feedback.
-
|
Shared SD and direct SD support now flash from SD for FW binary (esp3dfw.bin) and FS image (esp3dfs.bin) |
Beta Was this translation helpful? Give feedback.
-
|
I am currently reviewing the MKSWIFI FW (https://github.com/luc-github/MKS-WIFI/tree/debug) to understand it well and add support in ESP3D - once done - I will have a good understanding on how to had same fast upload protocol in ESP3D for other boards than MKS also |
Beta Was this translation helpful? Give feedback.
-
|
MKS WIFI fast upload is now |
Beta Was this translation helpful? Give feedback.
-
|
LittleFS for ESP32 is now implemented |
Beta Was this translation helpful? Give feedback.
-
|
WebDav server is now implemented |
Beta Was this translation helpful? Give feedback.
-
|
Hi Luc， Are there any plans to use ESP32 as a host computer? |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
pronterface and repetier support it without virtual com |
Beta Was this translation helpful? Give feedback.
-
|
I would say, the serial bridge is just the absolute lowest layer to just get the connection - after that the fun starts. |
Beta Was this translation helpful? Give feedback.
-
|
So, finally, I just want to make sure... Is there an easy way to remotely upload or print on ESP3D 3.0?😊 |
Beta Was this translation helpful? Give feedback.
-
|
print commands are visible when you list printer SD files |
Beta Was this translation helpful? Give feedback.
-
|
Still busy with WebUI and now changing the CI from travis to github action |
Beta Was this translation helpful? Give feedback.
-
|
Hello, Topic: ESP SD-card storage for webbrowser based printing. How can I check on ESP3D 3.0 (FW 3.0.0.a95, WebUI 3.0.0.85) that the storage is available? Connection to http://<3d-printer>:8181/ give me "Not found, URI: / Method: GET". I like to upload GCODE and print via WebInterface as I read there's limitation to print from 3Dprinter (Ender3 v2) which is no problem. |
Beta Was this translation helpful? Give feedback.
-
|
the shared sd method of https://github.com/ardyesp/ESPWebDAV is not supported, it is same as #454 |
Beta Was this translation helpful? Give feedback.
-
|
GRBL_ESP32 requested to be able to have no radio mode as fall back option instead of AP mode if STA is failing to connect.
same in esp3dcnf.ini It will be implemented this week end I think Edit: implemented with several fixes also |
Beta Was this translation helpful? Give feedback.
-
|
About file upload, to clarify and avoid recurrent questions, here is what the 3.0 should support in beta, this is an under going and planned work, implementation should follow list order (the status has ben updated since last time) UPLOAD_DIRECT_SD (implemented) UPLOAD_SHARED_SD (implemented) UPLOAD_SERIAL_SD (implemented in 2.1 but not available yet in 3.0) UPLOAD_FAST_SERIAL_SD (implemented for MKS) UPLOAD_FAST_SERIAL_USB (implemented for MKS) UPLOAD_DIRECT_USB (not started yet, and may be delayed to 3.1, waiting for hardware setup) |
Beta Was this translation helpful? Give feedback.
-
|
Some update as I did not for a while and got request to give some visibility : Because it will be difficult to manage ESP3D V3 alpha code with Webui V3 and several change ESP3D code used by ESP3DLib that will be merged back to ESP3D V3 - I will use the rewrite of webui 3.0 as base code for the change of ESP3DLib and new ESP3D V3 Indeed all Which will make the output more consistent To sum up:
once ESPLib V2/3 will be done code will be merged to ESP3D V3 and so the rewrite of WebUI V3 will be merged to current WebUI V3 It looks messy for the moment I appologize but it is the easy way to keep current existing code working until update is ready - thank you for your patience ^_^ |
Beta Was this translation helpful? Give feedback.
-
|
Webdav is now working as expected with ESP3D V3, the screen is made on ESP3DLib but it is same in ESP3D and shared/direct SD connection |
Beta Was this translation helpful? Give feedback.
-
|
FTP server code is now updated to support new SD access API and so globalFS Note: number of connection is still limited to 1 |
Beta Was this translation helpful? Give feedback.
-
|
The lastest esp32 core bring some change and I need to update display libraries - so I will take opportunity to rewrite the display module to reorganize the code and simplify the initial configuration |
Beta Was this translation helpful? Give feedback.
-
|
I just did release of alpha2 which is the refactoring version and the new code base |
Beta Was this translation helpful? Give feedback.
This comment was marked as off-topic.
This comment was marked as off-topic.
-
|
@Sawurai80 this is a status thread- if you have any issue please open a new ticket |
Beta Was this translation helpful? Give feedback.
-
|
Clarification on SD Support (again)
|
Beta Was this translation helpful? Give feedback.
-
|
Serveral bugs have been fixed for the SD Pro WiFi card thanks @y2kdread I have refactoring the Time module and totaly rewrote the Webdav Module based on code I did for ESP3D-TFT. For example it does not support PROPFIND with depth as infinity, but just do a max of Depth = 1 Unfortunaly Microsoft Windows does not respect Webdav RFC and use it own properties and do not care about Dav=1, neither of allowed methods list announced, and still try to use LOCK/UNLOCK/PROPATCH feature just for uploading a file... I will continue the porting from ESP3D-TFT code of at least 3 things: 1 - Refactorization of setting validation - the ESP3D-TFT has an API for that and I will add it to ESP3D (no visible impact but consistency in code across project and also some code simplification / readibility I think) 2 - Add the sticky authentication feature like in ESP3D-TFT for commands: when you use the pwd=in one command, the following won't need it anymore, same if you change to user level, that should apply to serial / telnet / websocket => TBC 3 - Streaming service from ESP3D- TFT (ongoing work) I am also reviewing the [ESPXXX] docs by doing a document for each one - that one take time because I do not like to write docs orz... and there are many ~100, the doc https://github.com/luc-github/ESP3D/blob/3.0/docs/espXXX.md once done will be splitted and uploaded to esp3d.io |
Beta Was this translation helpful? Give feedback.
-
|
Refactorization of setting validation is now done 😺 Working now on point 2 and preparing for point 3: When ESP3D-TFT use internal message class to transfert data that contain the orgin (client which send the message) and target (destination of this message) allowing easy filtering and message transportation. ESP3D currently only define and use target client. and has instead an hack in process function that allow to define only in the function: to only target the client X and to ignore client Y, and this is not following the message itself once function is passed.
So I will rewrite the ESP3DOutput class to ESP3DMessage to include origin and target, and also review all the dispatching process according these 2 elements. The implementation will be different than ESP3D-TFT because of ESP8266 and to avoid to break everything - but the concept should be same |
Beta Was this translation helpful? Give feedback.
-
|
Small update but huge impact: So actually I am now breaking everything and simplify the whole system => TBC, but it will stay sync system unlike ESP3D-TFT. |
Beta Was this translation helpful? Give feedback.
-
|
The messaging rewrite is ongoing - the painful task is currently to review each ESP command one by one to use new API which is currently only implemented on Serial, once all commands are updated I will update each clients and finally review the authentication part |
Beta Was this translation helpful? Give feedback.
-
|
All ESP command have been reviewed and new API messaging have been implemented on all clients Now I will review the authentication part and do test on 3 configs
If ok I will do the porting of ESP3DLib using the new code and latest release of Marlin at this moment |
Beta Was this translation helpful? Give feedback.
-
|
Sticky authentication is now implemented and due to rewrite of internal messaging the credential for each feature and command have been simplified to make the porting faster So currently user and admin have same level, I need to update that part. Here the scope of right for each authentication level:
Initially Any feedback / suggestions for changes on above table ? |
Beta Was this translation helpful? Give feedback.
-
|
implemented as follow:
|
Beta Was this translation helpful? Give feedback.
-
|
everything is.now integrated and sync with ESP3D-TFT but gcode streaming, need to test MKS protocol has no regresssion issue then I will merge devt branch and update ESP3DLib 3.0 accordingly |
Beta Was this translation helpful? Give feedback.
-
|
MKS robin tested and so far so good |
Beta Was this translation helpful? Give feedback.
-
|
Refactoring is now pushed to in 3.0 branch for more tests - feel free to feedback |
Beta Was this translation helpful? Give feedback.
-
|
In same spirit of ESP3D-TFT:https://esp3d.io/esp3d-tft/v1.x/hardware/index.html I have started to list all boards I have tested, this is an ongoing process, let me know if need more data, I am starting with 2.x and will also do 3.0 : https://esp3d.io/esp3d/v2.x/hardware/index.htm. |
Beta Was this translation helpful? Give feedback.
-
migration from #239
What is the plan ? Do what was not done in 2.0/2.1 😉
1 -
Nextion Screen support((ESP3D + Nextion FW) (cancelled)2 - M408 support according target FW support(On hold because dropped by Marlin)
3 - Reprap support (On hold)
4 - MKS complete support (done 👍 )
5 - ESP3D as Library as part of main board FW (eg Marlin) Code is emmbedded in Marlin ESP3DLib or GRBL_ESP32 firmware so will be a porting when 3.0 stand alone is done
_6 - UI improvement :
7 - Add ethernet support for ESP32 (like olimex)(done 👍 )
⚠️ Note: this not Printer SD so printer has no access to it, it is for host feature, storage purpose or FW flash purpose.
8 - Add optional translation file on flash FS for oled ESP3D message like (connected, update, etc...)(On hold)
9 -
Monitor temperatures on Oled in autonomous way (no web browser connected)(moved to ESP3D-TFT : https://github.com/luc-github/ESP3D-TFT)10 -Embedded Host support for ESP32 (on hold}
11 - New webUI :1:
12 - Fix issue with ESP8266 and Async Webserver and big Serial flow (on hold as 3.0 is planed to be sync only)(On hold)
13- Put all GCODE in preferences file for easier customization (WebUI)
14 - Heart beat generation to help UI to known if ESP3D is still connected or not (already implemented in GRBL-ESP32 and Marlin-ESP32 but disabled as buggy) (WebUI) (done 👍 )
15 - Fat FS support as option for SPIFFS for ESP32 , LittleFS as option for SPIFFS ESP8266 (done 👍 )
16 - Serial Bluetooth for ESP32 (done 👍 )
17 - Macro autostart (from FS done 👍 ) (from SD : TBD)
18 - Date Time on FS (SPIFFS / FAT / LittleFS) for ESP32 as ESP8266 (done 👍 )
19 - Add LittleFS support for ESP32 (done 👍)
20 - Buzzer support (done 👍)
21 - Push Notifications (Pushover / email) (done 👍)
22- Both way websocket communication (done 👍)
23 - Add auto notifications like #351 (done 👍)
24- USB host support using arduino usb host shield (https://github.com/felis/USB_Host_Shield_2.0) (on hold)
25 - Embedded camera support (done 👍)
26 - SD access with time support: Native (all) / SDFat (all) / SDIO (esp32 only) (done 👍)
27 -
TFT touch(moved to ESP3D-TFT: https://github.com/luc-github/ESP3D-TFT)28 - USB Disk support (using CH376s) (on hold)
29 - FTP Server (done 👍 )
30 - telegram notification support (done 👍 )
31 - BTT tft support (on going)
32 - WebDav server (done 👍 )
Beta Was this translation helpful? Give feedback.
All reactions