| Lenovo Ideapad S540-15IWL GTX Laptop on MacOS Catalina
| Lenovo Ideapad S540-15IWL GTX (81SW)
| Processor: Intel Core i7-8565U (4C / 8T, 1.8 / 4.6GHz, 8MB) | Memory: 4GB Soldered + 16GB DIMM DDR4-2400 | Graphics: Integrated Intel UHD Graphics 620 + GeForce GTX 1650 | Display: 15.6" FHD (1920x1080) TN 220nits Anti-glare | Hard Drive: CRUCIAL SSD 500 GB + Samsung 256GB PCIe NVMe | Wireless Network: Intel AC-9462 (Card replaced with BCM94360CS2 on an adapter.) | Audio: ALC 257 | Camera: Inbuilt | Battery: Integrated 52.5Wh | Operating System: Windows 10 Pro + MacOS Catalina with Clover. | BIOS: LATEST | Ethernet + Bluetooth: RTL 8188EU | Card Reader: Realtek RTS522A
| What's working:
- Keyboard
- Trackpad, gestures.
- Audio
- Headphones
- Brightness control
- Sleep
- Inbuilt Camera
- Card Reader: Fix also Sleep Problem!
| What's Not Working:
- Dedicated Graphic Cards with Acceleration
- FingerPrint Sensor (Never Will Work)
- HDMI PORT (Never Will Work)
| BIOS:
- Ensure your disk is in AHCI mode. Here are the settings that I used.
| USB installer:
- Create a normal installation media.
- Use my complete EFI Folder below.
| Ensure your clover/drivers/uefi folder has following files:
- ApfsDriverLoader.efi
- AppleImageCodec.efi
- AppleKeyAggregator.efi
- AppleKeyFeeder.efi
- AppleUITheme.efi
- AptioMemoryFix.efi
- AudioDxe.efi
- DataHubDxe.efi
- NvmExpressDxe.efi
- FSInject.efi
- VirtualSmc.efi
- HFSPlus.efi
| Ensure your clover/kexts folder has following files:
- Lilu.kext
- AppleALC.kext
- EFICheckDisabler.kext
- NoTouchID.kext
- NVMeFix.kext
- Sinetek-rtsx.kext
- SMCBatteryManager.kext
- SMCLightSensor.kext
- SMCProcessor.kext
- SystemProfiler
- Voodoo2C.kext
- VoodooInput.kext
- Voodoo2CHID.kext
- VoodooPS2Controller.kext
- VirtualSMC.kext
- WhateverGreen.kext
| Quickly Installation
- Install Clover on your usb drive EFI Partition and replace with my complete EFI Below.
| Keyboard:
- Keyboard already be working but the Keys Will be FN+K and FN+P for fix Brightness and Volume shortcuts:
- Volume already works. For brightness fix, use the SSDT-Q1112 patch.
- Also apply the _Q11->XQ11 and _Q12->XQ12 rename patch via clover config.
| Follow this guide if you need details.
- Inbuilt Camera Works. No extra files needed.
- CPU power management Works. No extra files needed.
| Sleep | Disable Hibernation:
- sudo pmset -a hibernatemode 0
- sudo pmset -a standby 0
- sudo pmset -a autopoweroff 0
- sudo rm /var/vm/sleepimage
- sudo mkdir /var/vm/sleepimage
| Configuration for MacBook Pro 15,2 (13-inch Mid 2019)
| Note: Copy and Paste my EFI in Your EFI Partition, and Than ENJOY Your HACKINTOSH!!!
| EFI LINK
| Contributors: Mariano Pela e Dreamwhite