Update README.md

README.md

@@ -48,13 +48,13 @@ Therefore, J2, J3, J5, J6, J7 and J8 are used to drive the displays. You can cha
 
 The protocol is very basic. For each pixel, one UDP packet can be sent, containing 4 bytes:
 
-MSB     Byte 3      LSB   MSB     Byte 2      LSB   MSB     Byte 1      LSB   MSB     Byte 0      LSB
+    MSB     Byte 3      LSB   MSB     Byte 2      LSB   MSB     Byte 1      LSB   MSB     Byte 0      LSB
 
-31 30 29 28 27 26 25 24 | 23 22 21 20 19 18 17 16 | 15 14 13 12 11 10 09 08 | 07 06 05 04 03 02 01 00
-
-      MSB - pos Y - LSB   MSB - pos X - LSB MSB  -  Red   - LSB MSB -  Green  - LSB MSB - Blue -  LSB
+    31 30 29 28 27 26 25 24 | 23 22 21 20 19 18 17 16 | 15 14 13 12 11 10 09 08 | 07 06 05 04 03 02 01 00
+ 
+          MSB - pos Y - LSB   MSB - pos X - LSB MSB  -  Red   - LSB MSB -  Green  - LSB MSB - Blue -  LSB
       
-      05 04 03 02 01 00   05 04 03 02 01 00 05 04   03 02 01 00 05 04 03 02   01 00 05 04 03 02 01 00
+          05 04 03 02 01 00   05 04 03 02 01 00 05 04   03 02 01 00 05 04 03 02   01 00 05 04 03 02 01 00
       
 The panel to drive is selected by the port the UDP packet is addressed to. Since this is done in the fpga by using a bitmask, the ports appear a bit unusual. However, they just share a common MSB, and the LSBs are used to mask what panel to address. This way you can also address multiple panels to display the same content, if you like.