BorosReed24 / BorosReedLoRa is a simple magnetic sensor based on a reed switch to detect a report in real time the using NRF24L01+ or Sx127x wireless modules.
Ideal for DIY projects, the device provide a flexible way add magnetic sensors to doors, windows, drawers... to your home/office atomation projects without hassle. There is no need to compile and flash the device it can be configured via usb with a PC using simple commands.
WARNING: When connecting a Serial<->USB adpator/FTDI be sure that it proved only 3.3V power. 5V adaptors will DESTROY the module.
- Change the on-board switch to configuration mode (up/left side).
- Connect a USB<->Serial (3.3V) adapter to BorosReed24 FTDI header and to your PC board.
- Open a terminal application at 9600,1,N. (PuTTY/Screen/Minicom/miniterm)
- Configure your BorosReed24 via simple commands.
- Unplug the USB<->Serial adapter.
- Change the on-board switch to notification mode (down/right side).
done!
WARNING: When connecting a Serial<->USB adpator/FTDI be sure that it proved only 3.3V power. 5V adaptors will DESTROY the module.
- NRF24L01 guide
- LoraWan guide
- Hardware reference