The following setup steps have been tested on Ubuntu 16.04 and on Ubuntu 18.04.
This first step is only required on Ubuntu 16.04 and can be skipped if you are on a more recent Ubuntu version. edi requires features that got introduced with Ansible 2.1. On Ubuntu 16.04 you can enable xenial-backports and then install Ansible as follows:
sudo apt install ansible/xenial-backports
Install lxd:
sudo apt install lxd
Close and re-open your user session to apply the new group membership (this guide assumes that you are either member of the group sudoers or admin, for details please read the linux containers documentation).
Initialize lxd:
sudo lxd init
The default settings are ok. Use the storage backend "dir" if there is no zfs setup on your computer.
For your convenience, you can directly install edi from a ppa:
Add the edi-snapshots ppa to your Ubuntu installation:
sudo add-apt-repository ppa:m-luescher/edi-snapshots sudo apt-get update
Install edi:
sudo apt install edi
If you plan to access edi generated containers or target systems using ssh, it is a good idea to create a ssh key pair. Hint: edi versions greater or equal than 0.11.0 have a secure by default setup of ssh and disable password based login.
Review if you already have existing ssh keys:
ls -al ~/.ssh
Valid public keys are typically named id_rsa.pub, id_dsa.pub, id_ecdsa.pub or id_ed25519.pub.
If there is no valid ssh key pair, generate one:
$ ssh-keygen -t rsa -b 4096 -C "you@example.com" Generating public/private rsa key pair. Enter file in which to save the key (/home/YOU/.ssh/id_rsa): Created directory '/home/YOU/.ssh'. Enter passphrase (empty for no passphrase): Enter same passphrase again:
Hint: If you decided to use a passphrase and do not want to reenter it every time, it is a good idea to use a ssh-agent.
Create an empty project folder:
cd ~/ mkdir my-first-edi-project cd my-first-edi-project
Generate a configuration for your project:
edi config init my-project debian-stretch-amd64
Build your first (development) lxc container named my-first-edi-container:
sudo edi -v lxc configure my-first-edi-container my-project-develop.yml
Log into the container using your current user name (Note: This user is only available within a development container.) and the password ChangeMe!:
lxc exec my-first-edi-container -- login ${USER}
Change the password for your container user:
passwd
Install a package within the container:
sudo apt install cowsay
Share a file with the host (Note: The folder ~/edi-workspace is shared with your host.):
cowsay "Hello world!" > ~/edi-workspace/hello
Leave the container:
exit
Read the file previously created within the container:
cat ~/edi-workspace/hello
Enter the container as root (Note: This is useful if you have a container without your personal user.):
lxc exec my-first-edi-container -- bash
And leave it again:
exit
Get the IP address of the container:
lxc list my-first-edi-container
Enter the container using ssh:
ssh CONTAINER_IP
And leave it again:
exit