This is my business card, as well as a QMK powered macro keyboard.
- 1 PCB
- 1 Pro Micro (or compatible controller)
- 2 Pro Micro standoffs (usually included when buying a Pro Micro)
- 4 MX switches
- 4 MX keycaps
- 4 rubber feet (optional)
Solder the Pro Micro face down onto the PCB with standoffs.
Solder the MX switches.
The card uses QMK as the firmware. To setup QMK, please referee to the QMK Docs
The pinout is the same as Biacco42/meishi. It can be flashed with the same configuration.
make meishi:default:avrdude
To reset the Pro Micro, short the RESET pin to ground.