Code for LED lamps.

Requirements:

• Raspberry Pi Pico or Pico W
• Quick setup for Circuitpython v9:
  • Install circuitpython (next section).
  • Copy all files in this repository onto the Pico.
  • Bob's your uncle.

Installation

Install Circuitpython

Download and copy the appropriate circuitpython file (version 9) to the Raspberry Pi Pico (or pico W):

• For Pico: https://circuitpython.org/board/raspberry_pi_pico/
• For Pico W: https://circuitpython.org/board/raspberry_pi_pico_w/

The Pico will rename itself CIRCUITPI

Copy files

• Copy files and folders from this repository onto the Raspberry Pi.
  • Note Sources:
    • neopixel.mpy: https://circuitpython.org/libraries
    • ledPixelsPico.py: https://github.com/lurbano/ledPixelsPico
• The Pico will run the code.py file by default.
  • This program assumes you have a 30 pixel array (at GPIO15) and a touch sensor (at GPIO16).
  • It will run a rainbow pattern that turns on and off when you touch the touch sensor.

Settings (Pico vs PicoW)

• the default code.py file is designed for the Pico with a touch sensor only.
• server.py: is designed for the picoW, to run by default replace the code.py file with this file.