You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
After uploading the SoftRF firmware (bridge version) on LPSTK-CC1352R it boots up but the green led does not turn on. Listening on UART port it can be seen that the software is running.
The green led is functional when tested with the factory firmware.
To Reproduce
Install and run SoftRF Uni in bridge mode (SoftRF-Bridge-v1.0-rc8-CC1352-OAD.bin bridge binary).
Hardware
Firmware version
Firmware settings
default
Describe the bug (or ask a question)
After uploading the SoftRF firmware (bridge version) on LPSTK-CC1352R it boots up but the green led does not turn on. Listening on UART port it can be seen that the software is running.
The green led is functional when tested with the factory firmware.
To Reproduce
Install and run SoftRF Uni in bridge mode (SoftRF-Bridge-v1.0-rc8-CC1352-OAD.bin bridge binary).
Expected behavior
After bootup the green led should lit indicating that SoftRF firmware is up and running.
https://github.com/lyusupov/SoftRF/wiki/Uni-Edition.-Firmware-maintenance-procedures Step 11.
The text was updated successfully, but these errors were encountered: