Merge branch 'master' of http://git.kernel.org/pub/scm/linux/kernel/g…

…it/torvalds/linux-2.6

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -296,6 +296,7 @@ Conexant 5066
 =============
   laptop	Basic Laptop config (default)
   hp-laptop	HP laptops, e g G60
+  asus		Asus K52JU, Lenovo G560
   dell-laptop	Dell laptops
   dell-vostro	Dell Vostro
   olpc-xo-1_5	OLPC XO 1.5

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/mach-ep93xx/core.c

@@ -838,7 +838,7 @@ EXPORT_SYMBOL(ep93xx_i2s_release);
 static struct resource ep93xx_ac97_resources[] = {
 	{
 		.start	= EP93XX_AAC_PHYS_BASE,
-		.end	= EP93XX_AAC_PHYS_BASE + 0xb0 - 1,
+		.end	= EP93XX_AAC_PHYS_BASE + 0xac - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -180,7 +180,7 @@ static const uint32_t mx25pdk_keymap[] = {
 	KEY(3, 3, KEY_POWER),
 };
 
-static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = {
+static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
 	.keymap		= mx25pdk_keymap,
 	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
 };

arch/arm/mach-ixp4xx/common.c

@@ -432,7 +432,7 @@ static struct clocksource clocksource_ixp4xx = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-unsigned long ixp4xx_timer_freq = FREQ;
+unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
 static void __init ixp4xx_clocksource_init(void)
 {
@@ -496,7 +496,7 @@ static struct clock_event_device clockevent_ixp4xx = {
 
 static void __init ixp4xx_clockevent_init(void)
 {
-	clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC,
+	clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC,
 					clockevent_ixp4xx.shift);
 	clockevent_ixp4xx.max_delta_ns =
 		clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx);

arch/arm/mach-ixp4xx/include/mach/timex.h

@@ -10,6 +10,7 @@
  * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
  * timer register ignores the bottom 2 bits of the LATCH value.
  */
-#define FREQ 66666000
-#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+#define IXP4XX_TIMER_FREQ 66666000
+#define CLOCK_TICK_RATE \
+	(((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
 

arch/arm/mach-ixp4xx/ixp4xx_qmgr.c

@@ -265,6 +265,11 @@ void qmgr_release_queue(unsigned int queue)
 	       qmgr_queue_descs[queue], queue);
 	qmgr_queue_descs[queue][0] = '\x0';
 #endif
+
+	while ((addr = qmgr_get_entry(queue)))
+		printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
+		       queue, addr);
+
 	__raw_writel(0, &qmgr_regs->sram[queue]);
 
 	used_sram_bitmap[0] &= ~mask[0];
@@ -275,10 +280,6 @@ void qmgr_release_queue(unsigned int queue)
 	spin_unlock_irq(&qmgr_lock);
 
 	module_put(THIS_MODULE);
-
-	while ((addr = qmgr_get_entry(queue)))
-		printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
-		       queue, addr);
 }
 
 static int qmgr_init(void)

arch/arm/mach-mxs/clock-mx23.c

@@ -304,7 +304,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
 	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg | (1 << clk->enable_shift)) {				\
+	if (reg & (1 << clk->enable_shift)) {				\
 		pr_err("%s: clock is gated\n", __func__);		\
 		return -EINVAL;						\
 	}								\
@@ -347,7 +347,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent)	\
 {									\
 	if (parent != clk->parent) {					\
 		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 HW_CLKCTRL_CLKSEQ_TOG);			\
+			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
 		clk->parent = parent;					\
 	}								\
 									\

arch/arm/mach-mxs/clock-mx28.c

@@ -355,12 +355,12 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	} else {							\
 		reg &= ~BM_CLKCTRL_##dr##_DIV;				\
 		reg |= div << BP_CLKCTRL_##dr##_DIV;			\
-		if (reg | (1 << clk->enable_shift)) {			\
+		if (reg & (1 << clk->enable_shift)) {			\
 			pr_err("%s: clock is gated\n", __func__);	\
 			return -EINVAL;					\
 		}							\
 	}								\
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);		\
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 									\
 	for (i = 10000; i; i--)						\
 		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
@@ -483,7 +483,7 @@ static int name##_set_parent(struct clk *clk, struct clk *parent)	\
 {									\
 	if (parent != clk->parent) {					\
 		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
-			 HW_CLKCTRL_CLKSEQ_TOG);			\
+			 CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ_TOG);	\
 		clk->parent = parent;					\
 	}								\
 									\
@@ -609,7 +609,6 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("duart", NULL, uart_clk)
 	_REGISTER_CLOCK("imx28-fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("imx28-fec.1", NULL, fec_clk)
-	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
 	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
 	_REGISTER_CLOCK(NULL, "hclk", hbus_clk)

arch/arm/mach-mxs/clock.c

@@ -57,7 +57,6 @@ static void __clk_disable(struct clk *clk)
 		if (clk->disable)
 			clk->disable(clk);
 		__clk_disable(clk->parent);
-		__clk_disable(clk->secondary);
 	}
 }
 
@@ -68,7 +67,6 @@ static int __clk_enable(struct clk *clk)
 
 	if (clk->usecount++ == 0) {
 		__clk_enable(clk->parent);
-		__clk_enable(clk->secondary);
 
 		if (clk->enable)
 			clk->enable(clk);

arch/arm/mach-mxs/gpio.c

@@ -139,6 +139,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 	struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq);
 	u32 gpio_irq_no_base = port->virtual_irq_start;
 
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+
 	irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
 			__raw_readl(port->base + PINCTRL_IRQEN(port->id));
 

arch/arm/mach-mxs/include/mach/clock.h

@@ -29,8 +29,6 @@ struct clk {
 	int id;
 	/* Source clock this clk depends on */
 	struct clk *parent;
-	/* Secondary clock to enable/disable with this clock */
-	struct clk *secondary;
 	/* Reference count of clock enable/disable */
 	__s8 usecount;
 	/* Register bit position for clock's enable/disable control. */

arch/arm/mach-omap1/lcd_dma.c

@@ -37,7 +37,7 @@ int omap_lcd_dma_running(void)
 	 * On OMAP1510, internal LCD controller will start the transfer
 	 * when it gets enabled, so assume DMA running if LCD enabled.
 	 */
-	if (cpu_is_omap1510())
+	if (cpu_is_omap15xx())
 		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
 			return 1;
 
@@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
 
 void omap_set_lcd_dma_b1_rotation(int rotate)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
 		BUG();
 		return;
@@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
 
 void omap_set_lcd_dma_b1_mirror(int mirror)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
 		BUG();
 	}
@@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA virtual resulotion is not supported "
 				"in 1510 mode\n");
 		BUG();
@@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
 
 void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
 {
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
 		BUG();
 	}
@@ -177,7 +177,7 @@ static void set_b1_regs(void)
 			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
 			/* 1510 DMA requires the bottom address to be 2 more
 			 * than the actual last memory access location. */
-			if (cpu_is_omap1510() &&
+			if (cpu_is_omap15xx() &&
 				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
 					bottom += 2;
 			ei = PIXSTEP(0, 0, 1, 0);
@@ -241,7 +241,7 @@ static void set_b1_regs(void)
 		return;	/* Suppress warning about uninitialized vars */
 	}
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
 		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
 		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
@@ -343,7 +343,7 @@ void omap_free_lcd_dma(void)
 		BUG();
 		return;
 	}
-	if (!cpu_is_omap1510())
+	if (!cpu_is_omap15xx())
 		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
 			    OMAP1610_DMA_LCD_CCR);
 	lcd_dma.reserved = 0;
@@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void)
 	 * connected. Otherwise the OMAP internal controller will
 	 * start the transfer when it gets enabled.
 	 */
-	if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 		return;
 
 	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
@@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma);
 void omap_setup_lcd_dma(void)
 {
 	BUG_ON(lcd_dma.active);
-	if (!cpu_is_omap1510()) {
+	if (!cpu_is_omap15xx()) {
 		/* Set some reasonable defaults */
 		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
 		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
 		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
 	}
 	set_b1_regs();
-	if (!cpu_is_omap1510()) {
+	if (!cpu_is_omap15xx()) {
 		u16 w;
 
 		w = omap_readw(OMAP1610_DMA_LCD_CCR);
@@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void)
 	u16 w;
 
 	lcd_dma.active = 0;
-	if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
 		return;
 
 	w = omap_readw(OMAP1610_DMA_LCD_CCR);

arch/arm/mach-omap1/time.c

@@ -44,7 +44,6 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
-#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>

arch/arm/mach-omap2/board-devkit8000.c

@@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
 
 static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 {
-	twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
-	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
 	if (gpio_is_valid(dssdev->reset_gpio))
 		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
 	return 0;
@@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[];
 static int devkit8000_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	int ret;
+
 	omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
@@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
-        /* gpio + 1 is "LCD_PWREN" (out, active high) */
-	devkit8000_lcd_device.reset_gpio = gpio + 1;
-	gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
-	/* Disable until needed */
-	gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+	/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+	devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+	ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+			GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
+	if (ret < 0) {
+		devkit8000_lcd_device.reset_gpio = -EINVAL;
+		printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+	}
 
 	/* gpio + 7 is "DVI_PD" (out, active low) */
 	devkit8000_dvi_device.reset_gpio = gpio + 7;
-	gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
-	/* Disable until needed */
-	gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+	ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
+			GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
+	if (ret < 0) {
+		devkit8000_dvi_device.reset_gpio = -EINVAL;
+		printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
+	}
 
 	return 0;
 }

arch/arm/mach-omap2/board-omap4panda.c

@@ -409,8 +409,6 @@ static void __init omap4_panda_init(void)
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
 	omap_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
-	/* OMAP4 Panda uses internal transceiver so register nop transceiver */
-	usb_nop_xceiv_register();
 	omap4_ehci_init();
 	usb_musb_init(&musb_board_data);
 }

arch/arm/mach-omap2/board-rm680.c

@@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
 static struct regulator_init_data rm680_vemmc = {
 	.constraints =	{
 		.name			= "rm680_vemmc",
-		.min_uV			= 2900000,
-		.max_uV			= 2900000,
-		.apply_uV		= 1,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_STATUS

arch/arm/mach-omap2/mux.c

@@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags,
 	if (!partition->base) {
 		pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
 			__func__, partition->phys);
+		kfree(partition);
 		return -ENODEV;
 	}
 

arch/arm/mach-omap2/pm34xx.c

@@ -168,9 +168,10 @@ static void omap3_core_restore_context(void)
  * once during boot sequence, but this works as we are not using secure
  * services.
  */
-static void omap3_save_secure_ram_context(u32 target_mpu_state)
+static void omap3_save_secure_ram_context(void)
 {
 	u32 ret;
+	int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 		/*
@@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state)
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 		ret = _omap_save_secure_sram((u32 *)
 				__pa(omap3_secure_ram_storage));
-		pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+		pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
 		/* Following is for error tracking, it should not happen */
 		if (ret) {
 			printk(KERN_ERR "save_secure_sram() returns %08x\n",
@@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void)
 		local_fiq_disable();
 
 		omap_dma_global_context_save();
-		omap3_save_secure_ram_context(PWRDM_POWER_ON);
+		omap3_save_secure_ram_context();
 		omap_dma_global_context_restore();
 
 		local_irq_enable();