Restart same sensor in patched LibreLink App (first session started without account)

[zwidow]

Hi!
Someone know if with the patched LibreLink-App is possible to restart the same sensor?
I fall in the "NOT UPDATED" instruction page... 😡https://github.com/.../instructions/en/instructions.md
that made me start the sensor without an active account.. now I can't switch data and sensor to Juggluco unless I start a new sensor in the patched app with an active account.....

[maheini]

If you didn't started your sensor whilst logged in, there's no chance to restart the sensor again.

The patched libre3 app does allow you to re-enable sensors which are previously enabled with an active account.

What do you mean by "NOT UPDATED" instruction page? Are you trying to switch from Patched app -> Juggluco to Juggluco direct solution?

If so, just chill and wait until the sensor expires. There are not huge benefits. Btw. there's a instruction for this solution in this repo as well (currently german only, but you can use google translate): https://github.com/maheini/FreeStyle-Libre-3-patch/blob/main/Juggluco-solution/juggluco-direct-instructions/de/instructions.md

English version will follow within the next month.

[zwidow]

I follow the old instruction but have no data on Juggluco, the connection between Patchedapp and Juggluco seems ok but still no data.
So I start search and find the "new" solution but I can't switch (due to account problem) and I can't see data in Juggluco.

[maheini]

Hang in there - it will be working. Everything is tested, even though it's a little bit more complex than the direct solution.

In general, your screenshots do look good. Please check those settings: Have you set the port 7117 at the top left? Everything else as well?

If it is still not working, try to restart your phone and wait some time after. Try to press "Sync" and "Syncronize" withing Libre/Juggluco.

And if there is still no reading visible, could you please make a screenshot of the detailed setting within Juggluco and Libre? Thanks.

[zwidow]

I deleted and recreate the connection in Juggluco, somthing change phone vibrating and a pop up appear with a blood sugar value.
But then nothing change, and still no data

[maheini]

Those settings do look good as well.

Some questions to solve the problem:

• So you received at least one reading within Jugglugo? Or just some empty message?
• I guess the patched libre app does receive readings, right?
• Are you using a VPN or proxy server on your phone?

If all those questions seem to be fine, then you might try the older Juggluco version: https://github.com/maheini/FreeStyle-Libre-3-patch/raw/400480da4bda8c57ff3622b3cb4cacd189cfcab5/Juggluco-solution/versions/latest/Juggluco.apk

[zwidow]

Yes I have data in the patched libre app.
I recived a pop up with a blood glucose number then nothing.
Is a spare phone connected in wi-fi no VPN or proxy
I've tryed the old version but nothing change.
I have some strange things, always have a notify in Juggluco (also the new version) that never disappear and don't know what it means.

The old version every time I open Juggluco ask me if I want to start without sensor or just open the app maybe is the standard but seems strange.

[maheini]

Hmmm... kind of hard to debug. I never had a notification which isn't visible inside Juggluco. The sensor-start check is normal for the old Juggluco app.

Here is a troubleshooting guide: link

If you haven't done yet, try to disable battery Optimisations for Juggluco, to keep it alive in the background.

I suspect the problem within the synchronization between Juggluco and Libre patch.

[maheini]

You can try to force-stop Juggluco. This should disable the notification at least for a moment and maybe even fix the problem

[zwidow]

The "Resend data" from libre app solve the issue in the old version now I have the data. Still have the notification also, but for now is ok.
I also have data in xdrip

[maheini]

Hurray! 😄

Glad to hear about that.

[maheini]

To sum it all up (for people with a similar problem):

• Try installing the previous Juggluco version: download link
• Set everything up (exactly as described within the instructions)
• Try pressing Resend data & Resync buttons within Juggluco & patched Libre 3 app
• Try restarting your phone.