Version inicial

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

Entidades/Entidades.csproj

@@ -0,0 +1,56 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="12.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{AB99885E-45AB-4475-B7C3-6D29D8DC3855}</ProjectGuid>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>Entidades</RootNamespace>
+    <AssemblyName>Entidades</AssemblyName>
+    <TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="Junta.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+    <Compile Include="Sala.cs" />
+    <Compile Include="Ubicacion.cs" />
+    <Compile Include="Usuario.cs" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+</Project>

Entidades/Junta.cs

@@ -0,0 +1,24 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+namespace Entidades
+{
+   public class Junta
+    {
+        public virtual int Id { get; set; }
+        public virtual Sala Sala { get; set; }
+        public virtual string Descripcion { get; set; }
+        public virtual string Comentario { get; set; }
+        public virtual TimeSpan HoraInicio { get; set; }
+        public virtual TimeSpan HoraFin { get; set; }
+        public virtual DateTime Fecha { get; set; }
+
+        public virtual string Hora()
+        {
+            return HoraInicio.ToString(@"hh\:mm") +" - "+ HoraFin.ToString(@"hh\:mm");
+        }
+
+    }
+}

Entidades/Properties/AssemblyInfo.cs

@@ -0,0 +1,36 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("Entidades")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Entidades")]
+[assembly: AssemblyCopyright("Copyright ©  2013")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible 
+// to COM components.  If you need to access a type in this assembly from 
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("b1fe9da0-f276-40e1-8036-15544195c308")]
+
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers 
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]

Entidades/Sala.cs

@@ -0,0 +1,18 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+namespace Entidades
+{
+    public class Sala
+    {
+        public virtual int Id { get; set; }
+        public virtual string Nombre { get; set; }
+        public virtual Ubicacion Ubicacion { get; set; }
+        public virtual IList<Junta> Juntas { get; set; }
+
+        public virtual IList<Junta> Proximas { get; set; }
+
+    }
+}

Entidades/Ubicacion.cs

@@ -0,0 +1,13 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+namespace Entidades
+{
+    public class Ubicacion
+    {
+        public virtual int Id { get; set; }
+        public virtual string Nombre { get; set; }
+    }
+}

Entidades/Usuario.cs

@@ -0,0 +1,14 @@
+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+
+namespace Entidades
+{
+    public class Usuario
+    {
+        public virtual int Id { get; set; }
+        public virtual string UserName { get; set; }
+        public virtual string NombreCompleto { get; set; }
+    }
+}

SalasDeJuntas/.nuget/NuGet.Config

@@ -0,0 +1,6 @@
+<?xml version="1.0" encoding="utf-8"?>
+<configuration>
+  <solution>
+    <add key="disableSourceControlIntegration" value="true" />
+  </solution>
+</configuration>

SalasDeJuntas/.nuget/NuGet.targets

@@ -0,0 +1,136 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+    <PropertyGroup>
+        <SolutionDir Condition="$(SolutionDir) == '' Or $(SolutionDir) == '*Undefined*'">$(MSBuildProjectDirectory)\..\</SolutionDir>
+
+        <!-- Enable the restore command to run before builds -->
+        <RestorePackages Condition="  '$(RestorePackages)' == '' ">false</RestorePackages>
+
+        <!-- Property that enables building a package from a project -->
+        <BuildPackage Condition=" '$(BuildPackage)' == '' ">false</BuildPackage>
+
+        <!-- Determines if package restore consent is required to restore packages -->
+        <RequireRestoreConsent Condition=" '$(RequireRestoreConsent)' != 'false' ">true</RequireRestoreConsent>
+
+        <!-- Download NuGet.exe if it does not already exist -->
+        <DownloadNuGetExe Condition=" '$(DownloadNuGetExe)' == '' ">false</DownloadNuGetExe>
+    </PropertyGroup>
+
+    <ItemGroup Condition=" '$(PackageSources)' == '' ">
+        <!-- Package sources used to restore packages. By default, registered sources under %APPDATA%\NuGet\NuGet.Config will be used -->
+        <!-- The official NuGet package source (https://www.nuget.org/api/v2/) will be excluded if package sources are specified and it does not appear in the list -->
+        <!--
+            <PackageSource Include="https://www.nuget.org/api/v2/" />
+            <PackageSource Include="https://my-nuget-source/nuget/" />
+        -->
+    </ItemGroup>
+
+    <PropertyGroup Condition=" '$(OS)' == 'Windows_NT'">
+        <!-- Windows specific commands -->
+        <NuGetToolsPath>$([System.IO.Path]::Combine($(SolutionDir), ".nuget"))</NuGetToolsPath>
+        <PackagesConfig>$([System.IO.Path]::Combine($(ProjectDir), "packages.config"))</PackagesConfig>
+    </PropertyGroup>
+
+    <PropertyGroup Condition=" '$(OS)' != 'Windows_NT'">
+        <!-- We need to launch nuget.exe with the mono command if we're not on windows -->
+        <NuGetToolsPath>$(SolutionDir).nuget</NuGetToolsPath>
+        <PackagesConfig>packages.config</PackagesConfig>
+    </PropertyGroup>
+
+    <PropertyGroup>
+        <!-- NuGet command -->
+        <NuGetExePath Condition=" '$(NuGetExePath)' == '' ">$(NuGetToolsPath)\NuGet.exe</NuGetExePath>
+        <PackageSources Condition=" $(PackageSources) == '' ">@(PackageSource)</PackageSources>
+
+        <NuGetCommand Condition=" '$(OS)' == 'Windows_NT'">"$(NuGetExePath)"</NuGetCommand>
+        <NuGetCommand Condition=" '$(OS)' != 'Windows_NT' ">mono --runtime=v4.0.30319 $(NuGetExePath)</NuGetCommand>
+
+        <PackageOutputDir Condition="$(PackageOutputDir) == ''">$(TargetDir.Trim('\\'))</PackageOutputDir>
+
+        <RequireConsentSwitch Condition=" $(RequireRestoreConsent) == 'true' ">-RequireConsent</RequireConsentSwitch>
+        <NonInteractiveSwitch Condition=" '$(VisualStudioVersion)' != '' AND '$(OS)' == 'Windows_NT' ">-NonInteractive</NonInteractiveSwitch>
+
+        <PaddedSolutionDir Condition=" '$(OS)' == 'Windows_NT'">"$(SolutionDir) "</PaddedSolutionDir>
+        <PaddedSolutionDir Condition=" '$(OS)' != 'Windows_NT' ">"$(SolutionDir)"</PaddedSolutionDir>
+
+        <!-- Commands -->
+        <RestoreCommand>$(NuGetCommand) install "$(PackagesConfig)" -source "$(PackageSources)"  $(NonInteractiveSwitch) $(RequireConsentSwitch) -solutionDir $(PaddedSolutionDir)</RestoreCommand>
+        <BuildCommand>$(NuGetCommand) pack "$(ProjectPath)" -Properties "Configuration=$(Configuration);Platform=$(Platform)" $(NonInteractiveSwitch) -OutputDirectory "$(PackageOutputDir)" -symbols</BuildCommand>
+
+        <!-- We need to ensure packages are restored prior to assembly resolve -->
+        <BuildDependsOn Condition="$(RestorePackages) == 'true'">
+            RestorePackages;
+            $(BuildDependsOn);
+        </BuildDependsOn>
+
+        <!-- Make the build depend on restore packages -->
+        <BuildDependsOn Condition="$(BuildPackage) == 'true'">
+            $(BuildDependsOn);
+            BuildPackage;
+        </BuildDependsOn>
+    </PropertyGroup>
+
+    <Target Name="CheckPrerequisites">
+        <!-- Raise an error if we're unable to locate nuget.exe  -->
+        <Error Condition="'$(DownloadNuGetExe)' != 'true' AND !Exists('$(NuGetExePath)')" Text="Unable to locate '$(NuGetExePath)'" />
+        <!--
+        Take advantage of MsBuild's build dependency tracking to make sure that we only ever download nuget.exe once.
+        This effectively acts as a lock that makes sure that the download operation will only happen once and all
+        parallel builds will have to wait for it to complete.
+        -->
+        <MsBuild Targets="_DownloadNuGet" Projects="$(MSBuildThisFileFullPath)" Properties="Configuration=NOT_IMPORTANT;DownloadNuGetExe=$(DownloadNuGetExe)" />
+    </Target>
+
+    <Target Name="_DownloadNuGet">
+        <DownloadNuGet OutputFilename="$(NuGetExePath)" Condition=" '$(DownloadNuGetExe)' == 'true' AND !Exists('$(NuGetExePath)')" />
+    </Target>
+
+    <Target Name="RestorePackages" DependsOnTargets="CheckPrerequisites">
+        <Exec Command="$(RestoreCommand)"
+              Condition="'$(OS)' != 'Windows_NT' And Exists('$(PackagesConfig)')" />
+
+        <Exec Command="$(RestoreCommand)"
+              LogStandardErrorAsError="true"
+              Condition="'$(OS)' == 'Windows_NT' And Exists('$(PackagesConfig)')" />
+    </Target>
+
+    <Target Name="BuildPackage" DependsOnTargets="CheckPrerequisites">
+        <Exec Command="$(BuildCommand)" 
+              Condition=" '$(OS)' != 'Windows_NT' " />
+
+        <Exec Command="$(BuildCommand)"
+              LogStandardErrorAsError="true"
+              Condition=" '$(OS)' == 'Windows_NT' " />
+    </Target>
+
+    <UsingTask TaskName="DownloadNuGet" TaskFactory="CodeTaskFactory" AssemblyFile="$(MSBuildToolsPath)\Microsoft.Build.Tasks.v4.0.dll">
+        <ParameterGroup>
+            <OutputFilename ParameterType="System.String" Required="true" />
+        </ParameterGroup>
+        <Task>
+            <Reference Include="System.Core" />
+            <Using Namespace="System" />
+            <Using Namespace="System.IO" />
+            <Using Namespace="System.Net" />
+            <Using Namespace="Microsoft.Build.Framework" />
+            <Using Namespace="Microsoft.Build.Utilities" />
+            <Code Type="Fragment" Language="cs">
+                <![CDATA[
+                try {
+                    OutputFilename = Path.GetFullPath(OutputFilename);
+
+                    Log.LogMessage("Downloading latest version of NuGet.exe...");
+                    WebClient webClient = new WebClient();
+                    webClient.DownloadFile("https://www.nuget.org/nuget.exe", OutputFilename);
+
+                    return true;
+                }
+                catch (Exception ex) {
+                    Log.LogErrorFromException(ex);
+                    return false;
+                }
+            ]]>
+            </Code>
+        </Task>
+    </UsingTask>
+</Project>