Add HET parameter file to stop CTE complaining. Refs #5953

Code/Mantid/instrument/HET_Parameters.xml

@@ -0,0 +1,180 @@
+<?xml version="1.0" encoding="UTF-8" ?>
+<parameter-file instrument = "HET" date = "2010-05-05T00:00:00">
+
+<component-link name = "HET">
+
+<!-- Specify that the detector positions should be taken from the data file -->
+<parameter name="det-pos-source" type="string">
+  <value val="datafile"/>
+</parameter>
+
+<parameter name="deltaE-mode" type="string">
+  <value val="direct"/>
+</parameter>
+
+<parameter name="ei-mon1-spec">
+  <value val="2"/>
+</parameter>
+
+<parameter name="ei-mon2-spec">
+  <value val="3"/>
+</parameter>
+
+<parameter name="scale-factor">
+  <value val="1.7016e8"/>
+</parameter>
+
+<parameter name="wb-scale-factor">
+  <value val="1000"/>
+</parameter>
+
+<parameter name="bkgd-range-min">
+  <value val="12000"/>
+</parameter>
+
+<parameter name="bkgd-range-max">
+  <value val="18000"/>
+</parameter>
+
+<parameter name="wb-integr-min">
+  <value val="20"/>
+</parameter>
+
+<parameter name="wb-integr-max">
+  <value val="40"/>
+</parameter>
+
+<parameter name="norm-mon1-spec">
+  <value val="69633"/>
+</parameter>
+
+<parameter name="norm-mon1-min">
+  <value val="1000"/>
+</parameter>
+
+<parameter name="norm-mon1-max">
+  <value val="2000"/>
+</parameter>
+
+<parameter name="monovan-integr-min">
+  <value val="-1"/>
+</parameter>
+
+<parameter name="monovan-integr-max">
+  <value val="1"/>
+</parameter>
+
+<parameter name="vanadium-mass">
+  <value val="30.1"/>
+</parameter>
+
+<parameter name="vanadium-rmm">
+  <value val="50.9415"/>
+</parameter>
+
+<!-- Diagnostic defaults -->
+
+<!-- Absolute lo threshold for vanadium diag (tiny) -->
+<parameter name="diag_tiny">
+  <value val="1e-10"/>
+</parameter>
+
+<!-- Absolute hi threshold for vanadium diag (huge) -->
+<parameter name="diag_huge">
+  <value val="1e10"/>
+</parameter>
+
+<!-- Remove zeroes in background (s_zero)-->
+<parameter name="diag_samp_zero">
+  <value val="0.0"/>
+</parameter>
+
+<!-- Fraction of median to consider counting low for the white beam diag (sv_lo)-->
+<parameter name="diag_samp_lo">
+  <value val="0.0"/>
+</parameter>
+
+<!-- Fraction of median to consider counting high for the white beam diag (sv_hi)-->
+<parameter name="diag_samp_hi">
+  <value val="1.5"/>
+</parameter>
+
+<!-- Error criterion as a multiple of error bar for background (sv_sig) -->
+<parameter name="diag_samp_sig">
+  <value val="3.3"/>
+</parameter>
+
+<!-- Lower bound defining outliers as fraction of median value (v_out_lo)-->
+<parameter name="diag_van_out_lo">
+  <value val="0.01"/>
+</parameter>
+
+<!-- Upper bound defining outliers as fraction of median value (v_out_hi)-->
+<parameter name="diag_van_out_hi">
+  <value val="100."/>
+</parameter>
+
+<!-- Fraction of median to consider counting low for the white beam diag (vv_lo)-->
+<parameter name="diag_van_lo">
+  <value val="0.1"/>
+</parameter>
+
+<!-- Fraction of median to consider counting high for the white beam diag (vv_hi)-->
+<parameter name="diag_van_hi">
+  <value val="2.0"/>
+</parameter>
+
+<!-- Error criterion as a multiple of error bar for background (vv_sig) -->
+<parameter name="diag_van_sig">
+  <value val="0.0"/>
+</parameter>
+
+<!-- True if background is to be checked -->
+<parameter name="check_background">
+  <value val="1.0"/>
+</parameter>
+
+<!-- True if the bleed tests should be run -->
+<parameter name="diag_bleed_test">
+  <value val="1.0"/>
+</parameter>
+
+<!-- The maximum framerate to allow in a tube -->
+<parameter name="diag_bleed_maxrate">
+  <value val="0.01"/>
+</parameter>
+
+<!-- The number of pixels to ignore around the centre of the tube -->
+<parameter name="diag_bleed_pixels">
+  <value val="80"/>
+</parameter>
+
+<!-- Variation for ratio test with second white beam -->
+<parameter name="diag_variation">
+  <value val="1.1"/>
+</parameter>
+
+<!--  -->
+<!-- Absolute units conversion average -->
+
+<parameter name="monovan_lo_bound">
+  <value val="0.01"/>
+</parameter>
+
+<parameter name="monovan_hi_bound">
+  <value val="100"/>
+</parameter>
+
+<parameter name="monovan_lo_frac">
+  <value val="0.8"/>
+</parameter>
+
+<parameter name="monovan_hi_frac">
+  <value val="1.2"/>
+</parameter>
+
+<!--  -->
+
+</component-link>
+
+</parameter-file>