Skip to content

marcoa131/Monolith_Panels

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

15 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

CC BY-NC-SA 4.0

Monolith Panels for Voron 2.4 and Trident [WIP]

1

Changelog:

15.10.2023:

  • Fixed the brim blockers' coordinate sytems

07.10.2023:

  • Slightly beefier corner clamps (FHCS version added).

  • Added VHB where I think it's necessary.

  • Fixed some naming mistakes.

What's this?

Overcomplicated panels.

2

Use:

  • The CAD contains everything that's needed for V2/VT 250/300/350mm with BOM thickness panels (3mm) and is also a good assembly guide.

  • It's intended to be used with another layer of 3mm foam tape or with 5mm foam tape paired with 4mm panels (Monolith Gantry stepper protrusion is 3.6mm).

  • Feel free to remix the parts for different setups!

  • Parts will load in the correct orientation when exported.

  • The corners can be used without the straights, but your mileage may vary if you don't put VHB on them.

  • When used as a panel frame you can get away with putting VHB only in the middle.

  • Recommended shrinkage compensation for the parts when printed in ABS is 99.3-99.5%. Make sure to test this before committing to printing huge amounts of plastic, because shrinkage can be 3-4mm in total.

  • Clips are fairly sensitive to EM/PA, but can be easily scaled to fit perfectly in the other plastic parts. They're not sensitive to alu extrusion tolerances.

3

BOM

DISCLAIMER: This is a challenging mod and a lot of the stuff is still untested. The BOM quantities can greatly vary based on how you build it. Always refer to CAD.

4

No. Description Qty
1. M3x16 SHCS or BHCS probably more than 10
2. M3x6 BHCS or M3x8 FHCS (better) definitely more than 10
3. M3 nuts probably more than 10
4. M3x5x4mm heatset inserts definitely more than 10
5. VHB tape enough
6. Foam tape enough
7. 4mm OD PTFE tube exactly 96mm

5

If you've any got questions you can find me on Discord @CloakedWayne



This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

CC BY-NC-SA 4.0

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published