Skip to content

Latest commit

 

History

History
86 lines (70 loc) · 3.61 KB

PAM-Authenticator.md

File metadata and controls

86 lines (70 loc) · 3.61 KB
Raw

PAM Authenticator

Pluggable authentication module (PAM) is a general purpose authentication API. An application using PAM can authenticate a user without knowledge about the underlying authentication implementation. The actual authentication scheme is defined in the operating system PAM config (e.g. /etc/pam.d/), and can be quite elaborate. MaxScale supports a very limited form of the PAM protocol, which this document details.

Configuration

The MaxScale PAM modules themselves have no configuration. All that is required is to change the listener and backend authenticator modules to PAMAuth and PAMBackendAuth, respectively.

[Read-Write-Listener]
type=listener
address=::
service=Read-Write-Service
protocol=MariaDBClient
authenticator=PAMAuth

[Master-Server]
type=server
address=123.456.789.10
port=12345
protocol=MariaDBBackend
authenticator=PAMBackendAuth

The PAM authenticator fetches user entries with plugin='pam' from the mysql.user table of a backend. The user accounts also need to have either the global SELECT-privilege or a database or a table-level privilege. The PAM service name of a user is read from the authetication_string-column. The matching PAM service in the operating system PAM config is used for authenticating the user. If the authetication_string for a user is empty, the fallback service mysql is used. If a username@host-combination matches multiple rows, they will all be attempted until authentication succeeds or all services fail.

PAM service configuration is out of the scope of this document, see The Linux-PAM System Administrators' Guide for more information. A simple service definition used for testing this module is below.

auth            required        pam_unix.so
account         required        pam_unix.so

Implementation details and limitations

The PAM general authentication scheme is difficult for a proxy such as MaxScale. An application using the PAM interface needs to define a conversation function to allow the OS PAM modules to communicate with the client, possibly exchanging multiple messages. This works when a client logs in to a normal server, but not with MaxScale since it needs to autonomously log into multiple backends. For MaxScale to successfully log into the servers, the messages and answers need to be predefined. This requirement denies the use of more exotic schemes such as one-time passwords or two-factor authentication.

The current version of the MaxScale PAM authentication module only supports a simple password exchange. On the client side, the authentication begins with MaxScale sending an AuthSwitchRequest packet. In addition to the command, the packet contains the client plugin name dialog, a message type byte 4 and the message Password: . In the next packet, the client should send the password, which MaxScale will forward to the PAM API running on the local machine. If the password is correct, an OK packet is sent to the client. No additional PAM-related messaging is allowed, as this would indicate a more complicated authentication scheme.

On the backend side, MaxScale expects the servers to act as MaxScale did towards the client. The servers should send an AuthSwitchRequest packet as defined above, MaxScale responds with the password received by the client authenticator and finally backend replies with OK.

SSL support

PAM Authenticator supports SSL connections from client to MaxScale, but not from MaxScale to backends.

Building the module

The PAM authenticator modules require the PAM and SQLite3 development libraries (libpam0g-dev and sqlite3-dev on Ubuntu).