wol

A Wake-On-LAN utility

DESCRIPTION

wol is a command-line tool for implementing the Wake-On-LAN protocol over a local-area network.

INSTALL

./autogen.sh
./configure
make
sudo make install

USAGE

Usage: wol [OPTION...] <mac address>
Wake-On-LAN packet sender

  -i, --interface=NAME       Specify the network interface through which to send [required]
  -p, --password=PASSWORD    Specify the SecureOn password
  -q, -s, --quiet, --silent  No output
  -?, --help                 Give this help list
      --usage                Give a short usage message
  -V, --version              Print program version

Report bugs to <https://github.com/mario-campos/wol>.

In its simplest form, simply pass a MAC-48 address in the typical colon-separated format (xx:xx:xx:xx:xx:xx) as an argument. Without specifying an interface, this command will broadcast the Wake-on-LAN magic packet across all supported interfaces:

wol de:ad:be:ef:ca:fe

You can limit the activity to a single network interface by specifying it with the -i/--interface flags:

wol --interface eth0 de:ad:be:ef:ca:fe

You can also supply a SecureOn password, with the -p/--password flags, for Wake-on-LAN hosts that support it. But beware that the password must be 6 characters or less and it is transmitted in cleartext.

wol --password foobar de:ad:be:ef:ca:fe

CAVEATS

The Wake-On-LAN protocol requires the target computer to support WOL. This is typically a hardware requirement.

LICENSE

wol is licensed with GNU GPL 3.0