LoRa packet sniffer for RNode hardware
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
.gitignore
LICENSE
README.md
loramon

README.md

LoRa packet sniffer for RNode hardware

Intro

This utility allows you to sniff LoRa networks with an RNode, and dump captured packets to the console or files.

usage: loramon [-h] [-C] [-W directory] [--freq Hz] [--bw Hz] [--txp dBm]
               [--sf factor] [--cr rate]
               [port]

LoRa packet sniffer for RNode hardware.

positional arguments:
  port           Serial port where RNode is attached

optional arguments:
  -h, --help     show this help message and exit
  -C, --console  Print captured packets to the console
  -W directory   Write captured packets to a directory
  --freq Hz      Frequency in Hz
  --bw Hz        Bandwidth in Hze
  --txp dBm      TX power in dBm
  --sf factor    Spreading factor
  --cr rate      Coding rate

Dependencies

The config utility requires Python 2.7 and pyserial. To install:

sudo apt install python python-pip
sudo pip install pyserial

Installation

Just clone or download this repository, place wherever you'd like and run loramon (remember to set executable permissions):

git clone https://github.com/markqvist/LoRaMon.git
cd LoRaMon
chmod a+x loramon
./loramon --help

Examples

Dump to console

Listens on a specified frequency and displays captured packets in the console.

./loramon /dev/ttyUSB0 --freq 868000000 --bw 125000 --sf 7 --cr 5 -C

Dump to console and disk

Like above, but also writes all captured packets individually to a specified directory.

./loramon /dev/ttyUSB0 --freq 868000000 --bw 125000 --sf 7 --cr 5 -C -W capturedir