Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Extruder running backwards even when E values are increasing in gcode #4

Closed
ttsalo opened this issue Aug 25, 2011 · 6 comments
Closed

Extruder running backwards even when E values are increasing in gcode #4

ttsalo opened this issue Aug 25, 2011 · 6 comments

Comments

@ttsalo
Copy link

ttsalo commented Aug 25, 2011

I have a gcode file which appears to cause the extruder to run backwards even when it should not.

Maze box gcode

The problem appears on layers 7-30 when the tight infill pattern is being printed between the walls. I checked that the E values are increasing, but the printer runs the extruder backwards hard when it tries to print the infill. When it goes back to printing the perimeter, the extruder runs perfectly normally forwards again.

I'm using Orca with Marlin 0.9.3 with the advance parameter at k=0.01. I can provide any other details if needed.
@ErikZalm
Copy link
Contributor

Hello,

Thanks for testing/trying the advance feature.

It is a very preliminarily feature which needs some tuning / debugging etc.
I get almost no feedback so I am very happy with this feedback.

Can you give me your E-steps / mm ?

Then I can look at this effect and look for a solution/bug fix.

Best regards,

Erik van der Zalm

----- Original Message -----
From: "ttsalo" reply@reply.github.com
To: erik@vdzalm.eu
Sent: Friday, August 26, 2011 1:12:03 AM
Subject: [Marlin] Extruder running backwards even when E values are increasing in gcode (#4)

I have a gcode file which appears to cause the extruder to run backwards even when it should not.

Maze box gcode

The problem appears on layers 7-30 when the tight infill pattern is being printed between the walls. I checked that the E values are increasing, but the printer runs the extruder backwards hard when it tries to print the infill. When it goes back to printing the perimeter, the extruder runs perfectly normally forwards again.

I'm using Orca with Marlin 0.9.3 with the advance parameter at k=0.01. I can provide any other details if needed.

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/4

@ttsalo
Copy link
Author

ttsalo commented Aug 26, 2011

My E-steps per mm are 80.7, I have verified that this is correct to within
few percent on my setup when extruding manually.

The advance seems to work well in most cases, for example when printing a
perimeter with 90 degree corners at very fast speeds (150mm/s). Honeycomb
infill at various sizes and large 100% filled areas look good too.

I didn't try the same print without the advance on, though. I can do that
later today to see what happens. There was also another pretty similar
infill pattern at higher levels in the print which didn't cause the
backwards motion, but did seem to cause the extruder to run only very very
slowly. Running with the advance on should always extrude the exact same
amount as without it, only with different timing, right?

2011/8/26 ErikZalm <
reply@reply.github.com>

Hello,

Thanks for testing/trying the advance feature.

It is a very preliminarily feature which needs some tuning / debugging etc.
I get almost no feedback so I am very happy with this feedback.

Can you give me your E-steps / mm ?

Then I can look at this effect and look for a solution/bug fix.

Best regards,

Erik van der Zalm

----- Original Message -----
From: "ttsalo" reply@reply.github.com
To: erik@vdzalm.eu
Sent: Friday, August 26, 2011 1:12:03 AM
Subject: [Marlin] Extruder running backwards even when E values are
increasing in gcode (#4)

I have a gcode file which appears to cause the extruder to run backwards
even when it should not.

Maze box gcode

The problem appears on layers 7-30 when the tight infill pattern is being
printed between the walls. I checked that the E values are increasing, but
the printer runs the extruder backwards hard when it tries to print the
infill. When it goes back to printing the perimeter, the extruder runs
perfectly normally forwards again.

I'm using Orca with Marlin 0.9.3 with the advance parameter at k=0.01. I
can provide any other details if needed.

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/4

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/4#issuecomment-1910344

@ErikZalm
Copy link
Contributor

Printing without advance works ok. And the extruder is working the same as for other FW versions.

The advance feature is implemented to limit the effects of acceleration on the extrusion diameter.
With advance (when working correctly, and calibrated) you should have a better print quality.
But is it beta at best.

For more info on the advance feature look at the link in the readme file.

Best regards,

Erik van der Zalm

----- Original Message -----
From: "ttsalo" reply@reply.github.com
To: erik@vdzalm.eu
Sent: Friday, August 26, 2011 11:19:28 AM
Subject: Re: [Marlin] Extruder running backwards even when E values are increasing in gcode (#4)

My E-steps per mm are 80.7, I have verified that this is correct to within
few percent on my setup when extruding manually.

The advance seems to work well in most cases, for example when printing a
perimeter with 90 degree corners at very fast speeds (150mm/s). Honeycomb
infill at various sizes and large 100% filled areas look good too.

I didn't try the same print without the advance on, though. I can do that
later today to see what happens. There was also another pretty similar
infill pattern at higher levels in the print which didn't cause the
backwards motion, but did seem to cause the extruder to run only very very
slowly. Running with the advance on should always extrude the exact same
amount as without it, only with different timing, right?

2011/8/26 ErikZalm <
reply@reply.github.com>

Hello,

Thanks for testing/trying the advance feature.

It is a very preliminarily feature which needs some tuning / debugging etc.
I get almost no feedback so I am very happy with this feedback.

Can you give me your E-steps / mm ?

Then I can look at this effect and look for a solution/bug fix.

Best regards,

Erik van der Zalm

----- Original Message -----
From: "ttsalo" reply@reply.github.com
To: erik@vdzalm.eu
Sent: Friday, August 26, 2011 1:12:03 AM
Subject: [Marlin] Extruder running backwards even when E values are
increasing in gcode (#4)

I have a gcode file which appears to cause the extruder to run backwards
even when it should not.

Maze box gcode

The problem appears on layers 7-30 when the tight infill pattern is being
printed between the walls. I checked that the E values are increasing, but
the printer runs the extruder backwards hard when it tries to print the
infill. When it goes back to printing the perimeter, the extruder runs
perfectly normally forwards again.

I'm using Orca with Marlin 0.9.3 with the advance parameter at k=0.01. I
can provide any other details if needed.

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/4

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/4#issuecomment-1910344

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/4#issuecomment-1911115

@lampmaker
Copy link

I've been playing with extruder advance a bit, but it's hard to debug.
It should also help with preventing stringing, so perhaps I'll generate some gcode to measure this effect
BTW, I noticed there is some more recent info about this feature http://reprap.org/wiki/Mattroberts'_Firmware.

@ErikZalm
Copy link
Contributor

This feature works only if volumetric extrusion is used.

It is not tested by many ppl. It needs some fine tuning/fixing. Feedback and testing will improve this function.

On Sep 23, 2011, at 10:36 PM, lampmaker wrote:

I've been playing with extruder advance a bit, but it's hard to debug.
It should also help with preventing stringing, so perhaps I'll generate some gcode to measure this effect
BTW, I noticed there is some more recent info about this feature http://reprap.org/wiki/Mattroberts'_Firmware.

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/4#issuecomment-2182551

@ttsalo
Copy link
Author

ttsalo commented Sep 28, 2011

I just updated to version 0.9.9 and it would seem that the issue is no
longer occurring.
I developed a test piece for this case:
http://www.thingiverse.com/thing:11895
http://www.thingiverse.com/thing:11895The raised circles are made of 240
segments each. With version 0.9.3, when printing this object at 50mm/s, it
comes out ok. When printing at 100mm/s, the three outermost raised circles
are printed correctly, the next one produces some output and the 6 innermost
circles all produce erratic extruder behaviour and no plastic output. So it
would seem that segments per second is the factor that triggers the bug.
However, with Marlin compiled from today's sources, with the advance feature
on, all the circles were printed correctly even at 100mm/s.

2011/9/23 ErikZalm <
reply@reply.github.com>

This feature works only if volumetric extrusion is used.

It is not tested by many ppl. It needs some fine tuning/fixing. Feedback
and testing will improve this function.

On Sep 23, 2011, at 10:36 PM, lampmaker wrote:

I've been playing with extruder advance a bit, but it's hard to debug.
It should also help with preventing stringing, so perhaps I'll generate
some gcode to measure this effect
BTW, I noticed there is some more recent info about this feature
http://reprap.org/wiki/Mattroberts'_Firmware.

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/4#issuecomment-2182551

Reply to this email directly or view it on GitHub:
https://github.com/ErikZalm/Marlin/issues/4#issuecomment-2182609

@tenaciousRas tenaciousRas mentioned this issue Oct 5, 2012
Closed
BobLWeiss added a commit to BobLWeiss/Marlin that referenced this issue Oct 17, 2013
@BobLWeiss
First upload to hardware.
df5fe54 
Having issue with homing and failed on running script MarlinFirmware#4 from host.
ErikZalm added a commit that referenced this issue Feb 25, 2014
@ErikZalm
Merge pull request #806 from Cylindric3D/typofixes_upstream
1aa10a5 
Various typo fixes #4 - only in comments, no code changes.
@Roxy-3D Roxy-3D mentioned this issue May 1, 2015
Closed
@clefranc clefranc mentioned this issue May 11, 2015
Closed
thinkyhead pushed a commit that referenced this issue Feb 17, 2016
Merge pull request #4 from MarlinFirmware/RCBugFix
27d918d 
Rc bug fix
@Roxy-3D Roxy-3D mentioned this issue Mar 15, 2016
Closed
@Roxy-3D Roxy-3D mentioned this issue Jun 1, 2016
Closed
@Gaffalover Gaffalover mentioned this issue Jun 2, 2016
Closed
@adamfilip adamfilip mentioned this issue Sep 18, 2016
Closed
@scott1326 scott1326 mentioned this issue Feb 28, 2017
Closed
@bgort bgort mentioned this issue May 9, 2017
Closed
@empakoso empakoso mentioned this issue Jun 8, 2017
Closed
@TGMods TGMods mentioned this issue Jul 19, 2017
Closed
khase pushed a commit to khase/Marlin that referenced this issue Apr 5, 2018
Auto Level MarlinFirmware#4
0dce487
@dcwalmsley dcwalmsley mentioned this issue Nov 29, 2018
Closed
trouch pushed a commit to trouch/Marlin that referenced this issue Mar 11, 2019
@InsanityAutomation
Merge pull request MarlinFirmware#4 from MarlinFirmware/bugfix-1.1.x
a9b30ac 
Bugfix 1.1.x 20180509 catchup
thinkyhead added a commit that referenced this issue Aug 24, 2019
@thinkyhead
ADIMLab Granty v1 / v2 (#15017)
20fc66f 
* # This is a combination of 18 commits.
# This is the 1st commit message:

Add Support for ADIMLab Granty

# The commit message #2 will be skipped:

# Update Configuration.h

# The commit message #3 will be skipped:

# Add files via upload
#
# Add Support for ADIMLab Granty

# The commit message #4 will be skipped:

# Create Configuration.h

# The commit message #5 will be skipped:

# Delete Configuration.h

# The commit message #6 will be skipped:

# Create Test.h

# The commit message #7 will be skipped:

# Add files via upload

# The commit message #8 will be skipped:

# Delete Test.h

# The commit message #9 will be skipped:

# Delete Configuration.h

# The commit message #10 will be skipped:

# Delete Configuration_adv.h

# The commit message #11 will be skipped:

# Add files via upload
#
# Add ADIMLab Pins

# The commit message #12 will be skipped:

# Add files via upload
#
# Add Bootscreen

# The commit message #13 will be skipped:

# Update Configuration.h
#
# Add Bootscreen

# The commit message #14 will be skipped:

# Update pins.h
#
# Add ADIMLab Board

# The commit message #15 will be skipped:

# Update boards.h
#
# Add ADIMLab Granty

# The commit message #16 will be skipped:

# Update Makefile
#
# Add ADIMLab Granty

# The commit message #17 will be skipped:

# Update boards.h

# The commit message #18 will be skipped:

# Update Makefile

* Add Support for ADIMLab Granty

* Optimize bootscreen

* Update Makefile

Updated Description

* Update boards.h

Updated Description

* Update pins_HJC2560C_REV2.h

Updated Description

* Update Configuration.h

Added Author + Custom_Machine_Name

* Create _Bootscreen.h

Add Bootscreen

* Add files via upload

Add ADIMLab Granty v1

* Update boards.h

Add ADIMLab Granty v1

* Update Makefile

Add ADIMLab Granty v1

* Update pins_HJC2560C_REV2.h

* Consolidate Granty configs

* config updates
fmuntean added a commit to fmuntean/Marlin that referenced this issue Sep 2, 2019
@fmuntean
Squashed commit of the following:
5fd68b3 
commit d59d9b5
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sun Sep 1 11:10:35 2019 +0200

    Alfawise - LK1/LK2/LK4 and BLTouch (MarlinFirmware#15118)

commit ee240d2
Author: weakset <esa.oikari@ejo.fi>
Date:   Sun Sep 1 12:04:40 2019 +0300

    Use Flash-based EEPROM on SKR mini-E3 (MarlinFirmware#15126)

commit be051c8
Author: Jason Smith <jason.inet@gmail.com>
Date:   Sun Sep 1 02:00:20 2019 -0700

    Fix Z_STEPPER_ALIGN_[XY] sanity error (MarlinFirmware#15124)

commit ee444d7
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sun Sep 1 04:10:50 2019 +0200

    Fix SKRmini test required serial port(s) (MarlinFirmware#15117)

commit c8e0967
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Sun Sep 1 03:54:36 2019 +0200

    Gantry: Enable Filament Change (MarlinFirmware#15122)

commit 8778e12
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 31 20:49:02 2019 -0500

    Fix some missed misspellings

commit 2747ab7
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sat Aug 31 18:46:10 2019 -0700

    Ender-3 default TMC currents (MarlinFirmware#15115)

commit 586b334
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Aug 31 19:44:45 2019 -0500

    Split up stepper indirection (MarlinFirmware#15111)

commit 87b16ed
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 31 07:03:36 2019 -0500

    Bring Configuration.h up to date

commit 8fca850
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 31 07:00:35 2019 -0500

    Patch early env rename

commit 25cf7de
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri Aug 30 23:40:52 2019 -0700

    Disable Tevo Tarantula Pro PIDTEMPBED (MarlinFirmware#15089)

commit 66f1da7
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 31 01:06:22 2019 -0500

    Use 'ui.' where possible

commit 26fa085
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Sat Aug 31 10:49:24 2019 +0700

    Add RGB565 Color Definitions for TFT (MarlinFirmware#15099)

commit 9449201
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 23:29:59 2019 -0500

    Add more platform Travis tests

commit 0f4d3e1
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 29 18:16:50 2019 -0500

    Fix ESP32 "DISABLED" name conflict

commit 1eeef30
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 30 19:14:43 2019 -0500

    A single generate_click lambda

commit c014f8d
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sat Aug 31 01:15:04 2019 +0200

    Fix STM32F1 SPI warning (gcc 8.2.1) (MarlinFirmware#15104)

commit d068470
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sat Aug 31 00:46:09 2019 +0200

    Prevent Linux min/max error (MarlinFirmware#15107)

commit ba91bca
Author: Bob Kuhn <bob.kuhn@att.net>
Date:   Fri Aug 30 17:39:45 2019 -0500

    TMC SPI daisy chain support (experimental) (MarlinFirmware#15081)

commit 0bcb644
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 30 16:09:57 2019 -0500

    Revert _BV testing commit

    This reverts commit 9223261.

commit 05ef9b2
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 30 14:44:39 2019 -0500

    [cron] Bump distribution date

commit 2aef83d
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 27 20:28:42 2019 -0500

    Add a PlatformIO hook to alter CXXFLAGS

commit 23cffb2
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 27 20:50:48 2019 -0500

    Add an env to get the Include Tree

commit 9223261
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 29 17:50:16 2019 -0500

    Only define _BV in Marduino.h

commit d25231a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 29 17:06:18 2019 -0500

    Spacing, defined(), #include tweaks

commit 7ebfae2
Author: Karl Andersson <karl@iaccess.se>
Date:   Fri Aug 30 00:00:01 2019 +0200

    Fix HAL_STM32 SPI regression (MarlinFirmware#15093)

    Reference: 0b47558

commit f5a1fab
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Thu Aug 29 14:57:56 2019 -0700

    Clarify TMC2209 Sensitivity vs. Others (MarlinFirmware#15092)

commit 3f77d6a
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Thu Aug 29 23:05:22 2019 +0200

    Fix expire_status warning (MarlinFirmware#15094)

commit 38983fd
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Thu Aug 29 13:19:07 2019 +0700

    Add 'Back' Button for Touch TFT 320x240 (MarlinFirmware#15060)

commit 8196ced
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 29 00:54:42 2019 -0500

    Leave LCD_PINS_Dn defined for other uses

    Fix MarlinFirmware#14998

commit 0ebaea9
Author: AlexandrZloy <49792082+AlexandrZloy@users.noreply.github.com>
Date:   Thu Aug 29 12:15:31 2019 +0700

    Add stallGuard threshold for X2 (MarlinFirmware#15042)

commit e1d65b8
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 29 00:00:03 2019 -0500

    [cron] Bump distribution date

commit ca5da02
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Thu Aug 29 06:49:51 2019 +0200

    dogm: u8g prototypes cleanup (MarlinFirmware#15082)

commit a61c91a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 28 21:28:21 2019 -0500

    Use 'bugfix' branch of U8glib-HAL

commit 1d8ad7c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 28 21:21:38 2019 -0500

    Safe changes from HAL cleanup

commit 9596312
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 28 08:12:18 2019 -0500

    Patch a u8g include

commit 7b99c26
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Aug 26 17:52:11 2019 -0500

    Fix FTDI_EVE_LIB platform includes

commit 3ac76f0
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Aug 28 07:40:18 2019 -0500

    Invariant Marlin bootscreen (MarlinFirmware#15057)

commit b2a4b6f
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 19:07:13 2019 -0500

    Don't use board url as override

commit b8e4b99
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 18:57:32 2019 -0500

    Separate board website URL

commit 6341aef
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 19:05:03 2019 -0500

    Info menu tweak style

commit 0f386d0
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 28 03:23:13 2019 -0600

    Followup fixes to ExtUI (MarlinFirmware#15068)

commit 081e450
Author: Luu Lac <45380455+shitcreek@users.noreply.github.com>
Date:   Wed Aug 28 04:20:28 2019 -0500

    Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS (MarlinFirmware#15069)

commit ca084dc
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Wed Aug 28 14:49:21 2019 +0700

    Switch col vs row variable name (MarlinFirmware#15072)

commit 604bdf0
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Wed Aug 28 09:46:21 2019 +0200

    Update Italian language (MarlinFirmware#15076)

commit b7796bc
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Wed Aug 28 01:51:01 2019 -0400

    Disable steppers on M112 (MarlinFirmware#15065)

    And change verbiage to not refer to "Emergency Stop."

commit 318356b
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Aug 26 00:00:07 2019 -0500

    [cron] Bump distribution date

commit d2f211c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 20:52:07 2019 -0500

    Gantry followup

commit 9d12788
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Mon Aug 26 03:51:06 2019 +0200

    ADIMLab Gantry - Spelling Correction (MarlinFirmware#15043)

commit 1769f43
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sun Aug 25 02:47:02 2019 -0700

    Fix CR-10/10S/Mini/5S Bed Thermistor Types (MarlinFirmware#15040)

commit f218405
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Sun Aug 25 05:46:02 2019 -0400

    Fix ExtUI invalid speed, timer (MarlinFirmware#15031)

commit 1557656
Author: Daniel Callander <Knifa@users.noreply.github.com>
Date:   Sun Aug 25 10:43:53 2019 +0100

    Add warning when trying to use JD with kinematic systems (MarlinFirmware#15032)

commit 7183a58
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 07:46:30 2019 -0500

    Add EZBOARD PT100 pin

commit c7825e6
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 04:30:02 2019 -0500

    Contrast over 63 assume 255 max

    This is closer to the prior behavior.

commit 1461ee4
Author: Tim Moore <tim@youngmoores.com>
Date:   Sun Aug 25 02:25:07 2019 -0700

    Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT (MarlinFirmware#15046)

commit 9e9e578
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 00:00:03 2019 -0500

    [cron] Bump distribution date

commit 8033bc8
Author: Tim Moore <tim@youngmoores.com>
Date:   Sat Aug 24 17:50:04 2019 -0700

    Turbo-back Info menu items (MarlinFirmware#15049)

commit d6a1652
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Aug 24 03:40:28 2019 -0500

    New Language: Vietnamese (MarlinFirmware#13892)

commit f6b604f
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 02:10:50 2019 -0500

    Helper Script tweaks

commit 7fbf40c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 02:02:31 2019 -0500

    Add command-check to get-bdf2u8g.sh

commit da601d5
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Sat Aug 24 00:47:19 2019 -0600

    Update USB_FLASH_DRIVE_SUPPORT (MarlinFirmware#15021)

commit 20fc66f
Merge: 7502569 334777c
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Aug 24 01:45:11 2019 -0500

    ADIMLab Granty v1 / v2 (MarlinFirmware#15017)

    * # This is a combination of 18 commits.
    # This is the 1st commit message:

    Add Support for ADIMLab Granty

    # The commit message MarlinFirmware#2 will be skipped:

    # Update Configuration.h

    # The commit message MarlinFirmware#3 will be skipped:

    # Add files via upload
    #
    # Add Support for ADIMLab Granty

    # The commit message MarlinFirmware#4 will be skipped:

    # Create Configuration.h

    # The commit message MarlinFirmware#5 will be skipped:

    # Delete Configuration.h

    # The commit message MarlinFirmware#6 will be skipped:

    # Create Test.h

    # The commit message MarlinFirmware#7 will be skipped:

    # Add files via upload

    # The commit message MarlinFirmware#8 will be skipped:

    # Delete Test.h

    # The commit message MarlinFirmware#9 will be skipped:

    # Delete Configuration.h

    # The commit message MarlinFirmware#10 will be skipped:

    # Delete Configuration_adv.h

    # The commit message MarlinFirmware#11 will be skipped:

    # Add files via upload
    #
    # Add ADIMLab Pins

    # The commit message MarlinFirmware#12 will be skipped:

    # Add files via upload
    #
    # Add Bootscreen

    # The commit message MarlinFirmware#13 will be skipped:

    # Update Configuration.h
    #
    # Add Bootscreen

    # The commit message MarlinFirmware#14 will be skipped:

    # Update pins.h
    #
    # Add ADIMLab Board

    # The commit message MarlinFirmware#15 will be skipped:

    # Update boards.h
    #
    # Add ADIMLab Granty

    # The commit message MarlinFirmware#16 will be skipped:

    # Update Makefile
    #
    # Add ADIMLab Granty

    # The commit message MarlinFirmware#17 will be skipped:

    # Update boards.h

    # The commit message MarlinFirmware#18 will be skipped:

    # Update Makefile

    * Add Support for ADIMLab Granty

    * Optimize bootscreen

    * Update Makefile

    Updated Description

    * Update boards.h

    Updated Description

    * Update pins_HJC2560C_REV2.h

    Updated Description

    * Update Configuration.h

    Added Author + Custom_Machine_Name

    * Create _Bootscreen.h

    Add Bootscreen

    * Add files via upload

    Add ADIMLab Granty v1

    * Update boards.h

    Add ADIMLab Granty v1

    * Update Makefile

    Add ADIMLab Granty v1

    * Update pins_HJC2560C_REV2.h

    * Consolidate Granty configs

    * config updates

commit 7502569
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 01:42:38 2019 -0500

    Apply #ifdef

commit d527c46
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 01:42:28 2019 -0500

    Delta: Reduce default MIN_STEPS_PER_SEGMENT

commit 848dd74
Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com>
Date:   Sat Aug 24 14:33:16 2019 +0800

    Fix STM32F1 ADC read temperature error (MarlinFirmware#15026)

    …after USB CDC connect.

commit 04a9962
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 00:57:50 2019 -0500

    Fix: Contrast override in pins files

    Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults.

commit 334777c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 00:24:48 2019 -0500

    config updates

commit 8c73017
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 00:00:04 2019 -0500

    [cron] Bump distribution date

commit 62d2a65
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 23 23:49:30 2019 -0500

    Consolidate Granty configs

commit 09ee5a5
Merge: 9d8e3d4 f2ad1ce
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 23 23:45:37 2019 -0500

    Merge remote-tracking branch 'upstream/bugfix-2.0.x' into bf2_granty_fix_15017

commit efeea9b
Author: Tim Moore <tim@youngmoores.com>
Date:   Fri Aug 23 20:30:11 2019 -0700

    pca9632_buzz fix (MarlinFirmware#15020)

commit e61e54a
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Fri Aug 23 21:29:00 2019 -0600

    Fix TURBO_BACK_MENU_ITEM compile error (MarlinFirmware#15019)

commit 0a280f0
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sat Aug 24 05:21:30 2019 +0200

    Flag unused variables without buzzer (MarlinFirmware#15016)

commit f2ad1ce
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 23 20:59:37 2019 -0500

    Update PT-BR

commit 9c87786
Author: ManuelMcLure <manuel@mclure.org>
Date:   Fri Aug 23 18:55:41 2019 -0700

    Change default Re-ARM UART pin order (MarlinFirmware#15037)

commit fdef32c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 22 18:17:13 2019 -0500

    Shorten Website URLs

commit 7924e0d
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 22 19:36:18 2019 -0500

    Add print at position shortcuts

commit 5c0e5c5
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 22 18:01:10 2019 -0500

    Fix boot screen warning

commit dd6efe9
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 22 18:56:59 2019 -0500

    Restore documented M503 behavior

commit 6429b8b
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 22 17:38:23 2019 -0500

    Fix EZBoard platform test

commit e604f76
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Thu Aug 22 01:56:39 2019 +0200

    Enable contrast via LCD_CONTRAST_INIT (MarlinFirmware#15006)

commit 9d8e3d4
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 17:38:08 2019 +0200

    Update pins_HJC2560C_REV2.h

commit 2526e2d
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 17:36:15 2019 +0200

    Update Makefile

    Add ADIMLab Granty v1

commit d858f44
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 17:34:44 2019 +0200

    Update boards.h

    Add ADIMLab Granty v1

commit c3d1671
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 17:30:17 2019 +0200

    Add files via upload

    Add ADIMLab Granty v1

commit 778466a
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 17:29:25 2019 +0200

    Create _Bootscreen.h

    Add Bootscreen

commit 42f3549
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 16:33:36 2019 +0200

    Update Configuration.h

    Added Author + Custom_Machine_Name

commit 0309a5f
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 16:30:08 2019 +0200

    Update pins_HJC2560C_REV2.h

    Updated Description

commit 9434b81
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 16:27:45 2019 +0200

    Update boards.h

    Updated Description

commit 6b35951
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 16:26:25 2019 +0200

    Update Makefile

    Updated Description

commit 012f577
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Wed Aug 21 13:22:23 2019 +0200

    STM32F1: Import (rogerclarkmelbourne) SPI class (MarlinFirmware#15002)

commit 4be9822
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 12:33:17 2019 +0200

    ADIMLab Granty pins/config (MarlinFirmware#14919)

commit 1fb3c40
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 21 05:30:33 2019 -0500

    Optimize bootscreen

commit f7aac7a
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Aug 21 05:05:44 2019 -0500

    Add Support for ADIMLab Granty

commit de122c9
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Sat Aug 10 18:18:27 2019 +0200

    # This is a combination of 18 commits.
    # This is the 1st commit message:

    Add Support for ADIMLab Granty

    # The commit message MarlinFirmware#2 will be skipped:

    # Update Configuration.h

    # The commit message MarlinFirmware#3 will be skipped:

    # Add files via upload
    #
    # Add Support for ADIMLab Granty

    # The commit message MarlinFirmware#4 will be skipped:

    # Create Configuration.h

    # The commit message MarlinFirmware#5 will be skipped:

    # Delete Configuration.h

    # The commit message MarlinFirmware#6 will be skipped:

    # Create Test.h

    # The commit message MarlinFirmware#7 will be skipped:

    # Add files via upload

    # The commit message MarlinFirmware#8 will be skipped:

    # Delete Test.h

    # The commit message MarlinFirmware#9 will be skipped:

    # Delete Configuration.h

    # The commit message MarlinFirmware#10 will be skipped:

    # Delete Configuration_adv.h

    # The commit message MarlinFirmware#11 will be skipped:

    # Add files via upload
    #
    # Add ADIMLab Pins

    # The commit message MarlinFirmware#12 will be skipped:

    # Add files via upload
    #
    # Add Bootscreen

    # The commit message MarlinFirmware#13 will be skipped:

    # Update Configuration.h
    #
    # Add Bootscreen

    # The commit message MarlinFirmware#14 will be skipped:

    # Update pins.h
    #
    # Add ADIMLab Board

    # The commit message MarlinFirmware#15 will be skipped:

    # Update boards.h
    #
    # Add ADIMLab Granty

    # The commit message MarlinFirmware#16 will be skipped:

    # Update Makefile
    #
    # Add ADIMLab Granty

    # The commit message MarlinFirmware#17 will be skipped:

    # Update boards.h

    # The commit message MarlinFirmware#18 will be skipped:

    # Update Makefile

commit 4581957
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 21 05:15:31 2019 -0500

    Clean up some pins

commit bd1ced1
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 21 03:48:06 2019 -0600

    LulzBot Touch UI Followup (MarlinFirmware#15007)

commit 8c2cfaa
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 20 23:45:38 2019 -0500

    Fix BigTree_Btt002 build

commit 69641f1
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 21 03:15:37 2019 -0600

    Fix incompatible types error (MarlinFirmware#15009)

commit 825c2c3
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 21 02:49:43 2019 -0600

    Fix fan speed encoder scaling (MarlinFirmware#15010)

commit f1942f6
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 21 00:00:04 2019 -0500

    [cron] Bump distribution date

commit 5e77760
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Aug 20 19:37:03 2019 -0500

    Add TURBO_BACK_MENU_ITEM option (MarlinFirmware#14991)

commit 0cc524b
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 20 19:08:58 2019 -0500

    Prevent BOARD_NAME conflict with env

commit 33f6d77
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Tue Aug 20 04:44:52 2019 -0400

    Adjust homing backoff feedrate (MarlinFirmware#14972)

commit 5a7c021
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Tue Aug 20 04:44:17 2019 -0400

    Misc. ExtUI fixes (MarlinFirmware#14971)

commit 6039893
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Tue Aug 20 04:42:30 2019 -0400

    Creality pins updates (MarlinFirmware#14979)

commit 8664b8e
Author: MaukCC <jos@mauk.cc>
Date:   Tue Aug 20 10:40:48 2019 +0200

    Adding HMS434 machine (MarlinFirmware#14931)

commit 5c6e827
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 20 03:11:18 2019 -0500

    Followup to STM32F407

commit 0b47558
Author: chzj333 <53591189+chzj333@users.noreply.github.com>
Date:   Tue Aug 20 16:05:12 2019 +0800

    New board STM32F407 (MarlinFirmware#14994)

commit bb4a252
Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com>
Date:   Tue Aug 20 16:02:52 2019 +0800

    Fix Bigtreetech STM32F40x variants ADC (MarlinFirmware#14996)

commit 67f8ba6
Author: Tim Moore <tim@youngmoores.com>
Date:   Tue Aug 20 00:40:44 2019 -0700

    Allow pullup/downs on power loss pin (MarlinFirmware#14986)

commit 19e21a8
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Tue Aug 20 00:38:31 2019 -0700

    Wanhao Duplicator i3 Mini config updates (MarlinFirmware#14908)

commit 05995d1
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Tue Aug 20 09:01:37 2019 +0200

    Unify buzz methods as MarlinUI::buzz (MarlinFirmware#14803)

commit 29c1290
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Aug 19 02:28:12 2019 -0500

    Minor HAL patches

commit 1432d44
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Aug 19 01:30:28 2019 -0500

    Patch circleci config

commit 94397db
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Aug 19 00:00:07 2019 -0500

    [cron] Bump distribution date

commit 17cd1a4
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 14 00:03:12 2019 -0500

    Tweak TOUCH_MI_DEPLOY_XPOS block

commit dfcd437
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 14 00:00:46 2019 -0500

    Base HAS_LCD_CONTRAST on display type

commit 3f678b0
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 23:37:15 2019 -0500

    Remove some extra F4 conditions

commit 4d1a662
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 23:24:55 2019 -0500

    Fix STM32F7 STEPPER_ENABLE_PIN

commit 08434b3
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 20:49:33 2019 -0500

    Add TMC26XStepper, not ignore

commit cd09e35
Author: Tim Moore <tim@youngmoores.com>
Date:   Sun Aug 18 19:17:00 2019 -0700

    Remove extra M503 "M412" report (MarlinFirmware#14985)

commit c5be59d
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Sun Aug 18 22:11:33 2019 -0400

    Fix runout trigger on "inactive" sensor (MarlinFirmware#14990)

commit af5a7a2
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Sun Aug 18 22:03:26 2019 -0400

    Add missing ExtUI user confirmation (MarlinFirmware#14992)

commit 33d54c0
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Mon Aug 19 09:00:21 2019 +0700

    Remove extra defines (MarlinFirmware#14983)

commit 403eefd
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 20:17:25 2019 -0500

    Delete _Bootscreen.h

commit bc93ac5
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 19:51:37 2019 -0500

    Fix #define typo in configs

commit d2072f9
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Aug 18 19:36:14 2019 -0500

    Clean up PlatformIO lib_ignore (MarlinFirmware#14988)

    Originally from MarlinFirmware#14832.

    Users may need to delete platformio work folders before building.

commit c8e476a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 18:33:56 2019 -0500

    Embed some items in HAS_LCD_MENU

commit 9a3ee3b
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 00:00:04 2019 -0500

    [cron] Bump distribution date

commit 9d9e2de
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 17 20:14:14 2019 -0500

    Tweak UBL G29 status print

commit 823178c
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Sun Aug 18 07:58:38 2019 +0700

    Use u8g int type for screen coordinates (MarlinFirmware#14965)

commit 6715fd1
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Sun Aug 18 01:40:01 2019 +0200

    Animated Marlin boot screen (MarlinFirmware#14961)

commit 9e49f15
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 17 15:47:17 2019 -0500

    [cron] Bump distribution date

commit 8bdb3d9
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Fri Aug 16 20:57:19 2019 -0600

    Add CONTROLLERFAN_SPEED_Z_ONLY (MarlinFirmware#14956)

commit 587d4a6
Author: AnHardt <github@kitelab.de>
Date:   Sat Aug 17 04:17:10 2019 +0200

    Repair display throttling (MarlinFirmware#14960)

commit fecf808
Author: J.C. Nelson <32139633+xC0000005@users.noreply.github.com>
Date:   Fri Aug 16 19:15:27 2019 -0700

    Fix lambda missing capture (MarlinFirmware#14969)

commit 66bfad3
Author: Bob Kuhn <bob.kuhn@att.net>
Date:   Fri Aug 16 20:06:32 2019 -0500

    Fix missing U8glib.h include (MarlinFirmware#14966)

commit 1bcc5c9
Author: J.C. Nelson <32139633+xC0000005@users.noreply.github.com>
Date:   Fri Aug 16 18:02:35 2019 -0700

    MalyanLCD: Pause, resume, more ExtUI (MarlinFirmware#14852)

commit c3ff53a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 16 18:47:51 2019 -0500

    STM32 u8g defines

    Suggested by MarlinFirmware#14742 (comment)

commit 4575978
Author: Tim Moore <tim@youngmoores.com>
Date:   Fri Aug 16 16:42:24 2019 -0700

    Fix auto power for chamber fan (MarlinFirmware#14922)

commit 274934a
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Fri Aug 16 17:34:13 2019 -0600

    Add LULZBOT_TOUCH_UI (MarlinFirmware#14967)

commit 179d6c4
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 14 20:05:15 2019 -0600

    Add STARTUP_SCRIPT option. M17 parity with M18. (MarlinFirmware#14953)

commit 36dfbae
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 14 16:52:57 2019 -0600

    Add missing function declaration (MarlinFirmware#14955)

commit 263d7d3
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 14 16:52:14 2019 -0600

    "SD card" => "Media" (MarlinFirmware#14951)

commit 24ce8be
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 14 00:00:11 2019 -0500

    [cron] Bump distribution date

commit 4cc1039
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Wed Aug 14 06:41:17 2019 +0200

    Alfawise Flash EEPROM, Z Servo Probe (MarlinFirmware#14877)

commit 0fbb26c
Author: Joseph Bozarth <bozarjp@gmail.com>
Date:   Tue Aug 13 23:38:45 2019 -0500

    M16 - Expected Printer Check (MarlinFirmware#14924)

commit a26b57a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 13 19:38:54 2019 -0500

    Minor pins cleanup

commit 059f575
Author: Acenotass <44540957+Acenotass@users.noreply.github.com>
Date:   Wed Aug 14 06:19:44 2019 +0600

    Update Russian language (MarlinFirmware#14940)

commit a67830b
Author: Timothy Hoogland <houseofbugs@gmail.com>
Date:   Tue Aug 13 00:03:42 2019 -0500

    TH3D EZBoard is LPC1769 (MarlinFirmware#14936)

commit 03df3f4
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Tue Aug 13 02:50:34 2019 +0200

    Fix Python scripts unhandled quotes (MarlinFirmware#14926)

commit c6be989
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Tue Aug 13 02:48:46 2019 +0200

    Store EEPROM config in flash (MarlinFirmware#14923)

    Avoid confusion between the 2 possible SDs...

commit 13d8dc0
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Sat Aug 10 18:25:30 2019 -0600

    Fix incorrect print stat in ExtUI (MarlinFirmware#14881)

commit dc21e2e
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Sat Aug 10 18:24:41 2019 -0600

    Increase XY nozzle offset range (MarlinFirmware#14882)

commit fa53384
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Sat Aug 10 18:23:37 2019 -0600

    Bury easter egg deeper (MarlinFirmware#14883)

commit af4bcb6
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sun Aug 11 02:22:48 2019 +0200

    SAMD51 typo fix (MarlinFirmware#14885)

commit d7172a4
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Sun Aug 11 02:22:18 2019 +0200

    Cleanup and conditions (MarlinFirmware#14886)

commit 03dbe16
Author: Johnny Eshak <info@johnnytheone.com>
Date:   Sun Aug 11 02:20:40 2019 +0200

    Compiling M43 on invalid conversion (MarlinFirmware#14897)

commit f085199
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sun Aug 11 02:19:52 2019 +0200

    SAMD51: Some LCD pin fixes (MarlinFirmware#14915)

commit d78086c
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sun Aug 11 02:18:32 2019 +0200

    SAMD51: Neopixel pin mapping (MarlinFirmware#14913)

commit 9c5086e
Author: Eric Ptak <trouch@trouch.com>
Date:   Sun Aug 11 02:14:31 2019 +0200

    [STM32F1] Simpler Flash EEPROM (MarlinFirmware#14829)

commit 0745d48
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sun Aug 11 01:22:11 2019 +0200

    Fix build with and without TOUCH_BUTTONS (MarlinFirmware#14912)

commit e7aba49
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri Aug 9 23:53:55 2019 -0700

    Update PB5 to correct pin number (MarlinFirmware#14891)

commit 5ea5d71
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri Aug 9 23:52:26 2019 -0700

    Tevo Michelangelo config updates (MarlinFirmware#14895)

commit 5d2519e
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sat Aug 10 08:45:36 2019 +0200

    Allow use of Fysetc SoftwareSerialM (MarlinFirmware#14893)

commit d2d71ca
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Sat Aug 10 13:42:52 2019 +0700

    Clean up Touch pins. Better up/down touch response. (MarlinFirmware#14900)

commit 8cc0b4b
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sat Aug 10 07:58:21 2019 +0200

    Revert "Edit STEPS_PER_MM integer only" (MarlinFirmware#14909)

    This reverts commit 2d98bb3.

commit 3129fd0
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sat Aug 10 07:56:55 2019 +0200

    SAMD51: Update LCD pins (MarlinFirmware#14907)

commit 9479ec3
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Sat Aug 10 07:53:26 2019 +0200

    Fix Service Menu compile error (MarlinFirmware#14903)

commit a7f1021
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sat Aug 10 00:00:20 2019 +0200

    Fix SPI_ENDSTOPS compile error (MarlinFirmware#14906)
fmuntean added a commit to fmuntean/Marlin that referenced this issue Sep 3, 2019
@fmuntean
Squashed commit of the following:
935bda2 
commit 12c595c
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Mon Sep 2 12:45:02 2019 +0200

    SAMD51 LCD support (MarlinFirmware#15113)

commit 23bb40d
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Sep 2 05:24:24 2019 -0500

    Fix MKS_MINI_12864 init

    See MarlinFirmware#13550

    Co-Authored-By: DrDitto <drditto@users.noreply.github.com>

commit 9958f5e
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Mon Sep 2 09:44:48 2019 +0200

    Home on G34 if steppers slept (MarlinFirmware#15127)

commit 59152f2
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Mon Sep 2 00:42:11 2019 -0700

    Flash-based EEPROM on SKR Mini E3 DIP (MarlinFirmware#15128)

commit c981710
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Mon Sep 2 09:40:33 2019 +0200

    Update French language (MarlinFirmware#15129)

commit e6a114b
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Mon Sep 2 09:39:40 2019 +0200

    Update Italian language (MarlinFirmware#15130)

commit b97bb14
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Mon Sep 2 09:37:50 2019 +0200

    Full-featured Alfawise U20 config (MarlinFirmware#15131)

commit 5406982
Author: Gustavo Alvarez <462213+sl1pkn07@users.noreply.github.com>
Date:   Mon Sep 2 09:36:32 2019 +0200

    Update Spanish language (MarlinFirmware#15132)

commit f6505c8
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Mon Sep 2 00:35:59 2019 -0700

    Fix Ender-3 Status Screen Y Offset (MarlinFirmware#15136)

commit 93dcc22
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Sep 2 01:09:45 2019 -0500

    Drop extra call to get_available_commands

commit 451a942
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Sep 2 01:04:00 2019 -0500

    Suspend queue during wait_for_hotend

commit b4715b2
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Sep 2 00:00:04 2019 -0500

    [cron] Bump distribution date

commit 34b7342
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Sep 1 23:54:41 2019 -0500

    Apply #ifdef/#ifndef where possible

commit 4078f26
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Sep 1 23:43:38 2019 -0500

    Apply shorthand option macros

commit a2e412c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Sep 1 20:21:11 2019 -0500

    Rename command buffer var

commit d59d9b5
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sun Sep 1 11:10:35 2019 +0200

    Alfawise - LK1/LK2/LK4 and BLTouch (MarlinFirmware#15118)

commit ee240d2
Author: weakset <esa.oikari@ejo.fi>
Date:   Sun Sep 1 12:04:40 2019 +0300

    Use Flash-based EEPROM on SKR mini-E3 (MarlinFirmware#15126)

commit be051c8
Author: Jason Smith <jason.inet@gmail.com>
Date:   Sun Sep 1 02:00:20 2019 -0700

    Fix Z_STEPPER_ALIGN_[XY] sanity error (MarlinFirmware#15124)

commit ee444d7
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sun Sep 1 04:10:50 2019 +0200

    Fix SKRmini test required serial port(s) (MarlinFirmware#15117)

commit c8e0967
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Sun Sep 1 03:54:36 2019 +0200

    Gantry: Enable Filament Change (MarlinFirmware#15122)

commit 8778e12
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 31 20:49:02 2019 -0500

    Fix some missed misspellings

commit 2747ab7
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sat Aug 31 18:46:10 2019 -0700

    Ender-3 default TMC currents (MarlinFirmware#15115)

commit 586b334
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Aug 31 19:44:45 2019 -0500

    Split up stepper indirection (MarlinFirmware#15111)

commit 87b16ed
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 31 07:03:36 2019 -0500

    Bring Configuration.h up to date

commit 8fca850
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 31 07:00:35 2019 -0500

    Patch early env rename

commit 25cf7de
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri Aug 30 23:40:52 2019 -0700

    Disable Tevo Tarantula Pro PIDTEMPBED (MarlinFirmware#15089)

commit 66f1da7
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 31 01:06:22 2019 -0500

    Use 'ui.' where possible

commit 26fa085
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Sat Aug 31 10:49:24 2019 +0700

    Add RGB565 Color Definitions for TFT (MarlinFirmware#15099)

commit 9449201
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 23:29:59 2019 -0500

    Add more platform Travis tests

commit 0f4d3e1
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 29 18:16:50 2019 -0500

    Fix ESP32 "DISABLED" name conflict

commit 1eeef30
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 30 19:14:43 2019 -0500

    A single generate_click lambda

commit c014f8d
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sat Aug 31 01:15:04 2019 +0200

    Fix STM32F1 SPI warning (gcc 8.2.1) (MarlinFirmware#15104)

commit d068470
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sat Aug 31 00:46:09 2019 +0200

    Prevent Linux min/max error (MarlinFirmware#15107)

commit ba91bca
Author: Bob Kuhn <bob.kuhn@att.net>
Date:   Fri Aug 30 17:39:45 2019 -0500

    TMC SPI daisy chain support (experimental) (MarlinFirmware#15081)

commit 0bcb644
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 30 16:09:57 2019 -0500

    Revert _BV testing commit

    This reverts commit 9223261.

commit 05ef9b2
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 30 14:44:39 2019 -0500

    [cron] Bump distribution date

commit 2aef83d
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 27 20:28:42 2019 -0500

    Add a PlatformIO hook to alter CXXFLAGS

commit 23cffb2
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 27 20:50:48 2019 -0500

    Add an env to get the Include Tree

commit 9223261
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 29 17:50:16 2019 -0500

    Only define _BV in Marduino.h

commit d25231a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 29 17:06:18 2019 -0500

    Spacing, defined(), #include tweaks

commit 7ebfae2
Author: Karl Andersson <karl@iaccess.se>
Date:   Fri Aug 30 00:00:01 2019 +0200

    Fix HAL_STM32 SPI regression (MarlinFirmware#15093)

    Reference: 0b47558

commit f5a1fab
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Thu Aug 29 14:57:56 2019 -0700

    Clarify TMC2209 Sensitivity vs. Others (MarlinFirmware#15092)

commit 3f77d6a
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Thu Aug 29 23:05:22 2019 +0200

    Fix expire_status warning (MarlinFirmware#15094)

commit 38983fd
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Thu Aug 29 13:19:07 2019 +0700

    Add 'Back' Button for Touch TFT 320x240 (MarlinFirmware#15060)

commit 8196ced
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 29 00:54:42 2019 -0500

    Leave LCD_PINS_Dn defined for other uses

    Fix MarlinFirmware#14998

commit 0ebaea9
Author: AlexandrZloy <49792082+AlexandrZloy@users.noreply.github.com>
Date:   Thu Aug 29 12:15:31 2019 +0700

    Add stallGuard threshold for X2 (MarlinFirmware#15042)

commit e1d65b8
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 29 00:00:03 2019 -0500

    [cron] Bump distribution date

commit ca5da02
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Thu Aug 29 06:49:51 2019 +0200

    dogm: u8g prototypes cleanup (MarlinFirmware#15082)

commit a61c91a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 28 21:28:21 2019 -0500

    Use 'bugfix' branch of U8glib-HAL

commit 1d8ad7c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 28 21:21:38 2019 -0500

    Safe changes from HAL cleanup

commit 9596312
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 28 08:12:18 2019 -0500

    Patch a u8g include

commit 7b99c26
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Aug 26 17:52:11 2019 -0500

    Fix FTDI_EVE_LIB platform includes

commit 3ac76f0
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Aug 28 07:40:18 2019 -0500

    Invariant Marlin bootscreen (MarlinFirmware#15057)

commit b2a4b6f
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 19:07:13 2019 -0500

    Don't use board url as override

commit b8e4b99
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 18:57:32 2019 -0500

    Separate board website URL

commit 6341aef
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 19:05:03 2019 -0500

    Info menu tweak style

commit 0f386d0
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 28 03:23:13 2019 -0600

    Followup fixes to ExtUI (MarlinFirmware#15068)

commit 081e450
Author: Luu Lac <45380455+shitcreek@users.noreply.github.com>
Date:   Wed Aug 28 04:20:28 2019 -0500

    Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS (MarlinFirmware#15069)

commit ca084dc
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Wed Aug 28 14:49:21 2019 +0700

    Switch col vs row variable name (MarlinFirmware#15072)

commit 604bdf0
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Wed Aug 28 09:46:21 2019 +0200

    Update Italian language (MarlinFirmware#15076)

commit b7796bc
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Wed Aug 28 01:51:01 2019 -0400

    Disable steppers on M112 (MarlinFirmware#15065)

    And change verbiage to not refer to "Emergency Stop."

commit 318356b
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Aug 26 00:00:07 2019 -0500

    [cron] Bump distribution date

commit d2f211c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 20:52:07 2019 -0500

    Gantry followup

commit 9d12788
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Mon Aug 26 03:51:06 2019 +0200

    ADIMLab Gantry - Spelling Correction (MarlinFirmware#15043)

commit 1769f43
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Sun Aug 25 02:47:02 2019 -0700

    Fix CR-10/10S/Mini/5S Bed Thermistor Types (MarlinFirmware#15040)

commit f218405
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Sun Aug 25 05:46:02 2019 -0400

    Fix ExtUI invalid speed, timer (MarlinFirmware#15031)

commit 1557656
Author: Daniel Callander <Knifa@users.noreply.github.com>
Date:   Sun Aug 25 10:43:53 2019 +0100

    Add warning when trying to use JD with kinematic systems (MarlinFirmware#15032)

commit 7183a58
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 07:46:30 2019 -0500

    Add EZBOARD PT100 pin

commit c7825e6
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 04:30:02 2019 -0500

    Contrast over 63 assume 255 max

    This is closer to the prior behavior.

commit 1461ee4
Author: Tim Moore <tim@youngmoores.com>
Date:   Sun Aug 25 02:25:07 2019 -0700

    Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT (MarlinFirmware#15046)

commit 9e9e578
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 25 00:00:03 2019 -0500

    [cron] Bump distribution date

commit 8033bc8
Author: Tim Moore <tim@youngmoores.com>
Date:   Sat Aug 24 17:50:04 2019 -0700

    Turbo-back Info menu items (MarlinFirmware#15049)

commit d6a1652
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Aug 24 03:40:28 2019 -0500

    New Language: Vietnamese (MarlinFirmware#13892)

commit f6b604f
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 02:10:50 2019 -0500

    Helper Script tweaks

commit 7fbf40c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 02:02:31 2019 -0500

    Add command-check to get-bdf2u8g.sh

commit da601d5
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Sat Aug 24 00:47:19 2019 -0600

    Update USB_FLASH_DRIVE_SUPPORT (MarlinFirmware#15021)

commit 20fc66f
Merge: 7502569 334777c
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sat Aug 24 01:45:11 2019 -0500

    ADIMLab Granty v1 / v2 (MarlinFirmware#15017)

    * # This is a combination of 18 commits.
    # This is the 1st commit message:

    Add Support for ADIMLab Granty

    # The commit message MarlinFirmware#2 will be skipped:

    # Update Configuration.h

    # The commit message MarlinFirmware#3 will be skipped:

    # Add files via upload
    #
    # Add Support for ADIMLab Granty

    # The commit message MarlinFirmware#4 will be skipped:

    # Create Configuration.h

    # The commit message MarlinFirmware#5 will be skipped:

    # Delete Configuration.h

    # The commit message MarlinFirmware#6 will be skipped:

    # Create Test.h

    # The commit message MarlinFirmware#7 will be skipped:

    # Add files via upload

    # The commit message MarlinFirmware#8 will be skipped:

    # Delete Test.h

    # The commit message MarlinFirmware#9 will be skipped:

    # Delete Configuration.h

    # The commit message MarlinFirmware#10 will be skipped:

    # Delete Configuration_adv.h

    # The commit message MarlinFirmware#11 will be skipped:

    # Add files via upload
    #
    # Add ADIMLab Pins

    # The commit message MarlinFirmware#12 will be skipped:

    # Add files via upload
    #
    # Add Bootscreen

    # The commit message MarlinFirmware#13 will be skipped:

    # Update Configuration.h
    #
    # Add Bootscreen

    # The commit message MarlinFirmware#14 will be skipped:

    # Update pins.h
    #
    # Add ADIMLab Board

    # The commit message MarlinFirmware#15 will be skipped:

    # Update boards.h
    #
    # Add ADIMLab Granty

    # The commit message MarlinFirmware#16 will be skipped:

    # Update Makefile
    #
    # Add ADIMLab Granty

    # The commit message MarlinFirmware#17 will be skipped:

    # Update boards.h

    # The commit message MarlinFirmware#18 will be skipped:

    # Update Makefile

    * Add Support for ADIMLab Granty

    * Optimize bootscreen

    * Update Makefile

    Updated Description

    * Update boards.h

    Updated Description

    * Update pins_HJC2560C_REV2.h

    Updated Description

    * Update Configuration.h

    Added Author + Custom_Machine_Name

    * Create _Bootscreen.h

    Add Bootscreen

    * Add files via upload

    Add ADIMLab Granty v1

    * Update boards.h

    Add ADIMLab Granty v1

    * Update Makefile

    Add ADIMLab Granty v1

    * Update pins_HJC2560C_REV2.h

    * Consolidate Granty configs

    * config updates

commit 7502569
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 01:42:38 2019 -0500

    Apply #ifdef

commit d527c46
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 01:42:28 2019 -0500

    Delta: Reduce default MIN_STEPS_PER_SEGMENT

commit 848dd74
Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com>
Date:   Sat Aug 24 14:33:16 2019 +0800

    Fix STM32F1 ADC read temperature error (MarlinFirmware#15026)

    …after USB CDC connect.

commit 04a9962
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 00:57:50 2019 -0500

    Fix: Contrast override in pins files

    Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults.

commit 334777c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 00:24:48 2019 -0500

    config updates

commit 8c73017
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 24 00:00:04 2019 -0500

    [cron] Bump distribution date

commit 62d2a65
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 23 23:49:30 2019 -0500

    Consolidate Granty configs

commit 09ee5a5
Merge: 9d8e3d4 f2ad1ce
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 23 23:45:37 2019 -0500

    Merge remote-tracking branch 'upstream/bugfix-2.0.x' into bf2_granty_fix_15017

commit efeea9b
Author: Tim Moore <tim@youngmoores.com>
Date:   Fri Aug 23 20:30:11 2019 -0700

    pca9632_buzz fix (MarlinFirmware#15020)

commit e61e54a
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Fri Aug 23 21:29:00 2019 -0600

    Fix TURBO_BACK_MENU_ITEM compile error (MarlinFirmware#15019)

commit 0a280f0
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sat Aug 24 05:21:30 2019 +0200

    Flag unused variables without buzzer (MarlinFirmware#15016)

commit f2ad1ce
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 23 20:59:37 2019 -0500

    Update PT-BR

commit 9c87786
Author: ManuelMcLure <manuel@mclure.org>
Date:   Fri Aug 23 18:55:41 2019 -0700

    Change default Re-ARM UART pin order (MarlinFirmware#15037)

commit fdef32c
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 22 18:17:13 2019 -0500

    Shorten Website URLs

commit 7924e0d
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 22 19:36:18 2019 -0500

    Add print at position shortcuts

commit 5c0e5c5
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 22 18:01:10 2019 -0500

    Fix boot screen warning

commit dd6efe9
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 22 18:56:59 2019 -0500

    Restore documented M503 behavior

commit 6429b8b
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Thu Aug 22 17:38:23 2019 -0500

    Fix EZBoard platform test

commit e604f76
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Thu Aug 22 01:56:39 2019 +0200

    Enable contrast via LCD_CONTRAST_INIT (MarlinFirmware#15006)

commit 9d8e3d4
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 17:38:08 2019 +0200

    Update pins_HJC2560C_REV2.h

commit 2526e2d
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 17:36:15 2019 +0200

    Update Makefile

    Add ADIMLab Granty v1

commit d858f44
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 17:34:44 2019 +0200

    Update boards.h

    Add ADIMLab Granty v1

commit c3d1671
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 17:30:17 2019 +0200

    Add files via upload

    Add ADIMLab Granty v1

commit 778466a
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 17:29:25 2019 +0200

    Create _Bootscreen.h

    Add Bootscreen

commit 42f3549
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 16:33:36 2019 +0200

    Update Configuration.h

    Added Author + Custom_Machine_Name

commit 0309a5f
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 16:30:08 2019 +0200

    Update pins_HJC2560C_REV2.h

    Updated Description

commit 9434b81
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 16:27:45 2019 +0200

    Update boards.h

    Updated Description

commit 6b35951
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 16:26:25 2019 +0200

    Update Makefile

    Updated Description

commit 012f577
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Wed Aug 21 13:22:23 2019 +0200

    STM32F1: Import (rogerclarkmelbourne) SPI class (MarlinFirmware#15002)

commit 4be9822
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Wed Aug 21 12:33:17 2019 +0200

    ADIMLab Granty pins/config (MarlinFirmware#14919)

commit 1fb3c40
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 21 05:30:33 2019 -0500

    Optimize bootscreen

commit f7aac7a
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Wed Aug 21 05:05:44 2019 -0500

    Add Support for ADIMLab Granty

commit de122c9
Author: ETE-Design <Mikkel@MPEntreprise.Dk>
Date:   Sat Aug 10 18:18:27 2019 +0200

    # This is a combination of 18 commits.
    # This is the 1st commit message:

    Add Support for ADIMLab Granty

    # The commit message MarlinFirmware#2 will be skipped:

    # Update Configuration.h

    # The commit message MarlinFirmware#3 will be skipped:

    # Add files via upload
    #
    # Add Support for ADIMLab Granty

    # The commit message MarlinFirmware#4 will be skipped:

    # Create Configuration.h

    # The commit message MarlinFirmware#5 will be skipped:

    # Delete Configuration.h

    # The commit message MarlinFirmware#6 will be skipped:

    # Create Test.h

    # The commit message MarlinFirmware#7 will be skipped:

    # Add files via upload

    # The commit message MarlinFirmware#8 will be skipped:

    # Delete Test.h

    # The commit message MarlinFirmware#9 will be skipped:

    # Delete Configuration.h

    # The commit message MarlinFirmware#10 will be skipped:

    # Delete Configuration_adv.h

    # The commit message MarlinFirmware#11 will be skipped:

    # Add files via upload
    #
    # Add ADIMLab Pins

    # The commit message MarlinFirmware#12 will be skipped:

    # Add files via upload
    #
    # Add Bootscreen

    # The commit message MarlinFirmware#13 will be skipped:

    # Update Configuration.h
    #
    # Add Bootscreen

    # The commit message MarlinFirmware#14 will be skipped:

    # Update pins.h
    #
    # Add ADIMLab Board

    # The commit message MarlinFirmware#15 will be skipped:

    # Update boards.h
    #
    # Add ADIMLab Granty

    # The commit message MarlinFirmware#16 will be skipped:

    # Update Makefile
    #
    # Add ADIMLab Granty

    # The commit message MarlinFirmware#17 will be skipped:

    # Update boards.h

    # The commit message MarlinFirmware#18 will be skipped:

    # Update Makefile

commit 4581957
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 21 05:15:31 2019 -0500

    Clean up some pins

commit bd1ced1
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 21 03:48:06 2019 -0600

    LulzBot Touch UI Followup (MarlinFirmware#15007)

commit 8c2cfaa
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 20 23:45:38 2019 -0500

    Fix BigTree_Btt002 build

commit 69641f1
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 21 03:15:37 2019 -0600

    Fix incompatible types error (MarlinFirmware#15009)

commit 825c2c3
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 21 02:49:43 2019 -0600

    Fix fan speed encoder scaling (MarlinFirmware#15010)

commit f1942f6
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 21 00:00:04 2019 -0500

    [cron] Bump distribution date

commit 5e77760
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Tue Aug 20 19:37:03 2019 -0500

    Add TURBO_BACK_MENU_ITEM option (MarlinFirmware#14991)

commit 0cc524b
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 20 19:08:58 2019 -0500

    Prevent BOARD_NAME conflict with env

commit 33f6d77
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Tue Aug 20 04:44:52 2019 -0400

    Adjust homing backoff feedrate (MarlinFirmware#14972)

commit 5a7c021
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Tue Aug 20 04:44:17 2019 -0400

    Misc. ExtUI fixes (MarlinFirmware#14971)

commit 6039893
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Tue Aug 20 04:42:30 2019 -0400

    Creality pins updates (MarlinFirmware#14979)

commit 8664b8e
Author: MaukCC <jos@mauk.cc>
Date:   Tue Aug 20 10:40:48 2019 +0200

    Adding HMS434 machine (MarlinFirmware#14931)

commit 5c6e827
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 20 03:11:18 2019 -0500

    Followup to STM32F407

commit 0b47558
Author: chzj333 <53591189+chzj333@users.noreply.github.com>
Date:   Tue Aug 20 16:05:12 2019 +0800

    New board STM32F407 (MarlinFirmware#14994)

commit bb4a252
Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com>
Date:   Tue Aug 20 16:02:52 2019 +0800

    Fix Bigtreetech STM32F40x variants ADC (MarlinFirmware#14996)

commit 67f8ba6
Author: Tim Moore <tim@youngmoores.com>
Date:   Tue Aug 20 00:40:44 2019 -0700

    Allow pullup/downs on power loss pin (MarlinFirmware#14986)

commit 19e21a8
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Tue Aug 20 00:38:31 2019 -0700

    Wanhao Duplicator i3 Mini config updates (MarlinFirmware#14908)

commit 05995d1
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Tue Aug 20 09:01:37 2019 +0200

    Unify buzz methods as MarlinUI::buzz (MarlinFirmware#14803)

commit 29c1290
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Aug 19 02:28:12 2019 -0500

    Minor HAL patches

commit 1432d44
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Aug 19 01:30:28 2019 -0500

    Patch circleci config

commit 94397db
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Mon Aug 19 00:00:07 2019 -0500

    [cron] Bump distribution date

commit 17cd1a4
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 14 00:03:12 2019 -0500

    Tweak TOUCH_MI_DEPLOY_XPOS block

commit dfcd437
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 14 00:00:46 2019 -0500

    Base HAS_LCD_CONTRAST on display type

commit 3f678b0
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 23:37:15 2019 -0500

    Remove some extra F4 conditions

commit 4d1a662
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 23:24:55 2019 -0500

    Fix STM32F7 STEPPER_ENABLE_PIN

commit 08434b3
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 20:49:33 2019 -0500

    Add TMC26XStepper, not ignore

commit cd09e35
Author: Tim Moore <tim@youngmoores.com>
Date:   Sun Aug 18 19:17:00 2019 -0700

    Remove extra M503 "M412" report (MarlinFirmware#14985)

commit c5be59d
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Sun Aug 18 22:11:33 2019 -0400

    Fix runout trigger on "inactive" sensor (MarlinFirmware#14990)

commit af5a7a2
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date:   Sun Aug 18 22:03:26 2019 -0400

    Add missing ExtUI user confirmation (MarlinFirmware#14992)

commit 33d54c0
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Mon Aug 19 09:00:21 2019 +0700

    Remove extra defines (MarlinFirmware#14983)

commit 403eefd
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 20:17:25 2019 -0500

    Delete _Bootscreen.h

commit bc93ac5
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 19:51:37 2019 -0500

    Fix #define typo in configs

commit d2072f9
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date:   Sun Aug 18 19:36:14 2019 -0500

    Clean up PlatformIO lib_ignore (MarlinFirmware#14988)

    Originally from MarlinFirmware#14832.

    Users may need to delete platformio work folders before building.

commit c8e476a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 18:33:56 2019 -0500

    Embed some items in HAS_LCD_MENU

commit 9a3ee3b
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sun Aug 18 00:00:04 2019 -0500

    [cron] Bump distribution date

commit 9d9e2de
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 17 20:14:14 2019 -0500

    Tweak UBL G29 status print

commit 823178c
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Sun Aug 18 07:58:38 2019 +0700

    Use u8g int type for screen coordinates (MarlinFirmware#14965)

commit 6715fd1
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Sun Aug 18 01:40:01 2019 +0200

    Animated Marlin boot screen (MarlinFirmware#14961)

commit 9e49f15
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Sat Aug 17 15:47:17 2019 -0500

    [cron] Bump distribution date

commit 8bdb3d9
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Fri Aug 16 20:57:19 2019 -0600

    Add CONTROLLERFAN_SPEED_Z_ONLY (MarlinFirmware#14956)

commit 587d4a6
Author: AnHardt <github@kitelab.de>
Date:   Sat Aug 17 04:17:10 2019 +0200

    Repair display throttling (MarlinFirmware#14960)

commit fecf808
Author: J.C. Nelson <32139633+xC0000005@users.noreply.github.com>
Date:   Fri Aug 16 19:15:27 2019 -0700

    Fix lambda missing capture (MarlinFirmware#14969)

commit 66bfad3
Author: Bob Kuhn <bob.kuhn@att.net>
Date:   Fri Aug 16 20:06:32 2019 -0500

    Fix missing U8glib.h include (MarlinFirmware#14966)

commit 1bcc5c9
Author: J.C. Nelson <32139633+xC0000005@users.noreply.github.com>
Date:   Fri Aug 16 18:02:35 2019 -0700

    MalyanLCD: Pause, resume, more ExtUI (MarlinFirmware#14852)

commit c3ff53a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Fri Aug 16 18:47:51 2019 -0500

    STM32 u8g defines

    Suggested by MarlinFirmware#14742 (comment)

commit 4575978
Author: Tim Moore <tim@youngmoores.com>
Date:   Fri Aug 16 16:42:24 2019 -0700

    Fix auto power for chamber fan (MarlinFirmware#14922)

commit 274934a
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Fri Aug 16 17:34:13 2019 -0600

    Add LULZBOT_TOUCH_UI (MarlinFirmware#14967)

commit 179d6c4
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 14 20:05:15 2019 -0600

    Add STARTUP_SCRIPT option. M17 parity with M18. (MarlinFirmware#14953)

commit 36dfbae
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 14 16:52:57 2019 -0600

    Add missing function declaration (MarlinFirmware#14955)

commit 263d7d3
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Wed Aug 14 16:52:14 2019 -0600

    "SD card" => "Media" (MarlinFirmware#14951)

commit 24ce8be
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Wed Aug 14 00:00:11 2019 -0500

    [cron] Bump distribution date

commit 4cc1039
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Wed Aug 14 06:41:17 2019 +0200

    Alfawise Flash EEPROM, Z Servo Probe (MarlinFirmware#14877)

commit 0fbb26c
Author: Joseph Bozarth <bozarjp@gmail.com>
Date:   Tue Aug 13 23:38:45 2019 -0500

    M16 - Expected Printer Check (MarlinFirmware#14924)

commit a26b57a
Author: Scott Lahteine <github@thinkyhead.com>
Date:   Tue Aug 13 19:38:54 2019 -0500

    Minor pins cleanup

commit 059f575
Author: Acenotass <44540957+Acenotass@users.noreply.github.com>
Date:   Wed Aug 14 06:19:44 2019 +0600

    Update Russian language (MarlinFirmware#14940)

commit a67830b
Author: Timothy Hoogland <houseofbugs@gmail.com>
Date:   Tue Aug 13 00:03:42 2019 -0500

    TH3D EZBoard is LPC1769 (MarlinFirmware#14936)

commit 03df3f4
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Tue Aug 13 02:50:34 2019 +0200

    Fix Python scripts unhandled quotes (MarlinFirmware#14926)

commit c6be989
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Tue Aug 13 02:48:46 2019 +0200

    Store EEPROM config in flash (MarlinFirmware#14923)

    Avoid confusion between the 2 possible SDs...

commit 13d8dc0
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Sat Aug 10 18:25:30 2019 -0600

    Fix incorrect print stat in ExtUI (MarlinFirmware#14881)

commit dc21e2e
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Sat Aug 10 18:24:41 2019 -0600

    Increase XY nozzle offset range (MarlinFirmware#14882)

commit fa53384
Author: Marcio Teixeira <marcio@alephobjects.com>
Date:   Sat Aug 10 18:23:37 2019 -0600

    Bury easter egg deeper (MarlinFirmware#14883)

commit af4bcb6
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sun Aug 11 02:22:48 2019 +0200

    SAMD51 typo fix (MarlinFirmware#14885)

commit d7172a4
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Sun Aug 11 02:22:18 2019 +0200

    Cleanup and conditions (MarlinFirmware#14886)

commit 03dbe16
Author: Johnny Eshak <info@johnnytheone.com>
Date:   Sun Aug 11 02:20:40 2019 +0200

    Compiling M43 on invalid conversion (MarlinFirmware#14897)

commit f085199
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sun Aug 11 02:19:52 2019 +0200

    SAMD51: Some LCD pin fixes (MarlinFirmware#14915)

commit d78086c
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sun Aug 11 02:18:32 2019 +0200

    SAMD51: Neopixel pin mapping (MarlinFirmware#14913)

commit 9c5086e
Author: Eric Ptak <trouch@trouch.com>
Date:   Sun Aug 11 02:14:31 2019 +0200

    [STM32F1] Simpler Flash EEPROM (MarlinFirmware#14829)

commit 0745d48
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sun Aug 11 01:22:11 2019 +0200

    Fix build with and without TOUCH_BUTTONS (MarlinFirmware#14912)

commit e7aba49
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri Aug 9 23:53:55 2019 -0700

    Update PB5 to correct pin number (MarlinFirmware#14891)

commit 5ea5d71
Author: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Date:   Fri Aug 9 23:52:26 2019 -0700

    Tevo Michelangelo config updates (MarlinFirmware#14895)

commit 5d2519e
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sat Aug 10 08:45:36 2019 +0200

    Allow use of Fysetc SoftwareSerialM (MarlinFirmware#14893)

commit d2d71ca
Author: Robby Candra <robbycandra.mail@gmail.com>
Date:   Sat Aug 10 13:42:52 2019 +0700

    Clean up Touch pins. Better up/down touch response. (MarlinFirmware#14900)

commit 8cc0b4b
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date:   Sat Aug 10 07:58:21 2019 +0200

    Revert "Edit STEPS_PER_MM integer only" (MarlinFirmware#14909)

    This reverts commit 2d98bb3.

commit 3129fd0
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sat Aug 10 07:56:55 2019 +0200

    SAMD51: Update LCD pins (MarlinFirmware#14907)

commit 9479ec3
Author: Ludy <Ludy87@users.noreply.github.com>
Date:   Sat Aug 10 07:53:26 2019 +0200

    Fix Service Menu compile error (MarlinFirmware#14903)

commit a7f1021
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date:   Sat Aug 10 00:00:20 2019 +0200

    Fix SPI_ENDSTOPS compile error (MarlinFirmware#14906)
fex42 pushed a commit to fex42/Marlin that referenced this issue May 2, 2020
@MKS-Sean
Merge pull request MarlinFirmware#4 from Kokorone/Contribution
aefbe0d 
Add BLTouch and MKS-PWC pin definitions
@thierryzoller thierryzoller mentioned this issue May 15, 2020
Closed
jmz52 referenced this issue in jmz52/Marlin Jun 27, 2020
@mapfde
Merge pull request #4 from xC0000005/LCDPR
532ed64 
Save PIO changes.
kgilliam2 pushed a commit to kgilliam2/Marlin that referenced this issue Oct 29, 2020
@marciot
Fix for LulzBot missing probe points (MarlinFirmware#4)
0544823 
- Restored ability to set probe points manually
@AletheianAlex AletheianAlex mentioned this issue Dec 9, 2020
Merged
rallegade pushed a commit to rallegade/Marlin that referenced this issue Jan 4, 2021
@codiac2600
Merge pull request MarlinFirmware#4 from MarlinFirmware/2.0.x
75a5884 
Merge
@bugfixin bugfixin mentioned this issue Jan 8, 2021
Closed
kovalevvv pushed a commit to kovalevvv/Marlin that referenced this issue Feb 8, 2021
@Sergey1560
Merge pull request MarlinFirmware#4 from fyfywka/FB4S_WIFI
1beeb80 
Логотип
@kpishere kpishere mentioned this issue Apr 13, 2021
Closed
@ajanky ajanky mentioned this issue Aug 4, 2021
Closed
@tdcox tdcox mentioned this issue Aug 17, 2021
Closed
arades79 pushed a commit to CELLINKAB/Marlin that referenced this issue Dec 2, 2021
Lid gripper (MarlinFirmware#4)
5fe588e 
* add more fast

* readjust optical config

* remove state reporting

* just go to a safe Z height instead of back to previous position

* change default cycles to account for new behavior

* only start cycle counting after first trigger

* enable emergency parser

* pulldown sensor to filter erroneous actication

* update TMCStepper

* make autocal faster

* do not yeet syringe

* const correctness

* please don't break syringe

* dont report position by default

* bump ststm32 lib version

* change constants

* add debugging tool

* implement second sensor

* clean and add debugging

* use better algorithms

* use type correct constants

* cleanup stallguard config for smoother stops

* MVP lid gripper + experimental interrupt stepper drive

* serial and pin updates for lid gripper

* cleanup/organize

* use tmc2209 step generator instead of making our own pulses

* adjust homing for reliability

* reorganize/refactor for readability and type safety
@MarlinFirmware MarlinFirmware locked as resolved and limited conversation to collaborators Mar 16, 2022
Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@bkubicek @ErikZalm @lampmaker @ttsalo