Skip to content

Latest commit

 

History

History
119 lines (86 loc) · 5.86 KB

README.md

File metadata and controls

119 lines (86 loc) · 5.86 KB

pm2-slack

This is a PM2 Module for sending events & logs from your PM2 processes to Slack.

Install

To install and setup pm2-slack, run the following commands:

pm2 install pm2-slack
pm2 set pm2-slack:slack_url https://slack_url

To get the Slack URL, you need to setup an Incoming Webhook. More details on how to set this up can be found here: https://api.slack.com/incoming-webhooks

Events subscription configuration

The following events can be subscribed to:

  • log - All standard out logs from your processes. Default: false
  • error - All error logs from your processes. Default: true
  • kill - Event fired when PM2 is killed. Default: true
  • exception - Any exceptions from your processes. Default: true
  • restart - Event fired when a process is restarted. Default: false
  • reload - Event fired when a cluster is reloaded. Default: false
  • delete - Event fired when a process is removed from PM2. Default: false
  • stop - Event fired when a process is stopped. Default: false
  • restart overlimit - Event fired when a process is reaches the max amount of times it can restart. Default: true
  • exit - Event fired when a process is exited. Default: false
  • start - Event fired when a process is started. Default: false
  • online - Event fired when a process is online. Default: false

You can simply turn these on and off by setting them to true or false using the PM2 set command.

pm2 set pm2-slack:log true
pm2 set pm2-slack:error false

Options

The following options are available:

  • slack_url (string) - Slack Incomming Webhook URL.
  • servername / username (string) - Set the custom username for Slack messages (visible in message headers). Default: server hostname
  • buffer (bool) - Enable/Disable buffering of messages. Messages that occur in short time will be concatenated together and posted as a single slack message. Default: true
  • buffer_seconds (int) - If buffering is enables, all messages are stored for this interval. If no new messages comes in this interval, buffered message(s) are sended to Slack. If new message comes in this interval, the "timer" will be reseted and buffer starts waiting for the new interval for a new next message. Note: Puspose is reduction of push notifications on Slack clients. Default: 2
  • buffer_max_seconds (int) - If time exceed this time, the buffered messages are always sent to Slack, even if new messages are still comming in interval (property buffer_seconds). Default: 20
  • queue_max (int) - Maximum number of messages, that can be send in one Slack message (in one bufferring round). When the queue exceeds this maximum, next messages are suppresesed and replaced with message "Next XX messages have been suppressed.". Default: 100

Set these options in the same way as subscribing to events.

Example

The following configuration options will enable message buffering, and set the buffer duration to 5 seconds. All messages that occur within maximum 5 seconds delay between two neighboring messages will be concatenated into a single slack message.

pm2 set pm2-slack:slack_url https://hooks.slack.com/services/123456789/123456789/aaaaaaa
pm2 set pm2-slack:buffer_seconds 5

Note: In this example, the maximum total delay for messages is still 20 seconds (default value for buffer_max_seconds). After this time, the buffer will be flushed everytime and all messages will be sent.

Process based custom options

By default, all options are defined for all processes globally. But you can separately define custom options to each PM2 process. Use format pm2-slack:optionName-processName to process based custom options.

If no custom options is defined, the global pm2-slack:propertyName will be used.

Note: By this way, all custom options can be used for specific process, but events subsciptions configuration is always global only.

Example

We have many processes, includes process foo and process bar. For this two processes will have to define separate Slack URL channel and separate server name. Same buffer options will be used for all processed.

# Define global options for all processes.
pm2 set pm2-slack:buffer_seconds 5

# Define global options for all processes.
#   (for process `foo` and `bar` the values will be overridden below).
pm2 set pm2-slack:slack_url https://hooks.slack.com/services/123456789/123456789/aaaaaaa
pm2 set pm2-slack:servername Orion

# Define custom Slack Incomming Webhoook for `foo` process.
pm2 set pm2-slack:slack_url-foo https://hooks.slack.com/services/123456789/123456789/bbbbbbb
pm2 set pm2-slack:servername-foo Foo-server
# Note: The `pm2-slack:buffer_seconds`=5 will be used from global options for this process. 

# Define custom Slack Incomming Webhoook for `bar` process
pm2 set pm2-slack:slack_url-bar https://hooks.slack.com/services/123456789/123456789/ccccccc
pm2 set pm2-slack:servername-foo Bar-server
# Note: The `pm2-slack:buffer_seconds`=5 will be used from global options for this process. 

Contributing

In lieu of a formal styleguide, take care to maintain the existing coding style. Add unit tests for any new or changed functionality. Lint and test your code.

Release History

  • 1.1.0 Custom options can be defined to each PM2 process. Displaying process ID of cluster mode processes (thanks @abawchen).
  • 1.0.0 Message bufferring refactored. Message grouping refactored. Added datetime parsing from log messages.
  • 0.3.4 Added an option to override the Slack username
  • 0.3.3 Added documentation for the reload event
  • 0.3.2 Fixed Half width of error and log messages (thanks @ma-zal)
  • 0.3.1 Fixed Double escaping of error and log messages (thanks @ma-zal)
  • 0.3.0 Switched to a default buffer system that groups alike messages by timestamp in the same message to Slack (thanks @kjhangiani)
  • 0.2.0 Implemented a rate limiting system and updated all the dependencies
  • 0.1.1 Commenting & Clean up
  • 0.1.0 Initial Release