アリステア Acrylic Case design formatted ready for Ponoko with the kerf of the switch cutout set to 0.15mm. Case files are updated to reflect changes to the full backspace on switch 59 and have the Arisutea logo engraved on the case. The I ordered with these changes just came in this week (3/6/2021) and it works very well with the changes I made to the full backspace and addition of the stablizer on the prototypes designed by CorruptedJef and robotictomato. There are 2 versions of the low profile case. One is just the normal lopro case and the other is if you opt to use matte colors from Ponoko as only one side of the acrylic is matte. This flips the bottom of the case and the long "step up" pieces on the vertical axis so that the actual bottom of the case will be matte as well when assembling the case.
There is now a "boxed" version of the case that I have made that is designed to work with some wrist rests that do not have the ortho shape. I have not tested this design yet but the prototype should be here this coming week (3/29/2021).
There are now case files for vv0.6 that include the indicator LEDs, I have not ordered/tested these but will soon.
These files are a fork from FateNozomi's Arisu case which can be found HERE
- Low Profile Angled Case (arisutea_lopro_case_P2_ponoko.eps)
- Low Profile Angled Case Matte Colors (Optional) (arisutea_lopro_case_P2_ponoko_matte.eps)
- High Profile Angled Layer (Optional) (arisutea_hipro_layer_P2_ponoko.eps)
- Low Profile Boxed Case (arisutea_lopro_case_P2_boxed_ponoko.eps)
- Low Profile Boxed Case Matte Colors (Optional) (arisutea_lopro_case_P2_boxed_matte_ponoko.eps)
- High Profile Boxed Layer (Optional) (arisutea_hipro_layer_P2_boxed_ponoko.eps)
- Low Profile Angled Case with LED cutouts (arisutea_lopro_case_indicators_P2_ponoko.eps)
- Low Profile Angled Case Matte Colors with LED cutouts (Optional) (arisutea_lopro_case_indicators_P2_ponoko_matte.eps)
- High Profile Angled Layer with LED cutouts (Optional) (arisutea_hipro_layer_indicators_P2_ponoko.eps)
- Upload the .eps file to Ponoko and select P2 size 3mm acrylic with the color of your choice.
- Remember if choosing to use matte colors you must upload the matte file!
| Material | Quantity |
|---|---|
| M2.5 * 12mm | 4 |
| M2.5 * 5mm | 12 |
| M2.5 HARWIN R25-1000602 standoff | 8 |
| Material | Quantity |
|---|---|
| M2.5 * 12mm | 12 |
| M2.5 * 5mm | 4 |
| M2.5 HARWIN R25-1000602 standoff | 8 |
This design uses M2.5 screws and standoffs. Feel free to modify the screw and standoff hole design accommodate your needs.
The case will sit at an angle with the center portion protruding out so test the placement of your rubber bumpons before sticking them.
