Make difference between Arducam versions more clearly

Enclosure/README.MD

@@ -1,4 +1,12 @@
-There are **4 versions** of the enclosure:
+There are **4 versions** of the enclosure. The **Arudam V1** camera is used in **all devices build from 2018**, as the **Arducam V2** part has become **deprecated**. You can distinguish between those two by having a look at the lense. The V1 has a big lense on top of it, the V2 only a very flat one.
+
+**ArducamV1:**
+<img src="https://images-na.ssl-images-amazon.com/images/I/61QiB6hqMZL._SX466_.jpg" width="300" />
+
+**ArducamV2:**
+<img src="http://www.arducam.com/wp-content/uploads/2016/08/ArduCAM-2MP-V2-2-1.jpg" width="300" />
+
+You can find those four versions in the corresponding folders:
 
 **ArducamV1_NonRadiometric**: Made for the Arducam V1 Mini 2MP camera and the Lepton2.0 / Lepton3.0 non-radiometric sensor
 
@@ -8,8 +16,6 @@ There are **4 versions** of the enclosure:
 
 **ArducamV2_Radiometric**: Made for the Arducam V2 Mini 2MP camera and the Lepton2.5 radiometric sensor
 
-The **Arudam V1** camera is used in all devices build starting 2018, as the **Arducam V2** part has become deprecated. You can distinguish between those two by having a look at the lense. The V1 has a big lense on top of it, the V2 only a very flat one.
-
 The difference between the **radiometric** and **non-radiometric** versions is, that the non-radiometric setup also needs an external spot sensor. For the radiometric version, this cutout in the enclosure has been removed.
 
 The enclosure has been designed with Google Sketchup for a material thickness of **3mm**. The standard enclosure is cut out of **black acryl plastic** by a laser cutting service.