Skip to content


Folders and files

Last commit message
Last commit date

Latest commit



8 Commits

Repository files navigation

Update Spring 2024- all mechboards ferris kits are now able to use standard Sweep firmware. If your sweep PCB has a QR code on it, you can disregard all of the below, including controller orientation steps.

The MBUK Ferris Sweep PCBs do not have a pinout that matches the standard sweep in QMK master.

Additionally, the controller labelling on the PCB is confusing.

This is how the controllers should be oriented (choc version at the top- chips up, mx/choc version at the bottom- chips down).


This is frustrating. It will be remedied in future releases of the PCB.

The pre-built PCBs should come flashed with a VIA keymap- you should be able to open and see your keyboard connected, its keymap, and then be able to remap keys there.

For now, the firmware source can be found here: for the Choc Only PCB for the Choc/MX PCB

To compile your own firmware for these PCBs, you should follow and when it comes to cloning your repository use qmk setup keyboard-magpie/qmk_firmware then you will need to check out the mbuk-ferris branch (you can type qmk cd then git checkout mbuk-ferris after setup has completed.

Someone has kindly provided a ZMK source here for one of the PCBs- i have not tested nor clarified which PCB this is for:

Sorry. This isn't an optimal experience.

If you run into issues, reach out on discord (


No description, website, or topics provided.






No releases published


No packages published