Efi mem crypto v2 #2

mefff · 2021-10-26T21:45:35Z

No description provided.

Add the capability to mark regions of the memory memory_type able of hardware memory encryption. Also add the capability to query if all regions of a memory node are able to do hardware memory encryption. Signed-off-by: Martin Fernandez <martin.fernandez@eclypsium.com>

Add a new member in the pg_data_t struct tell whether the node corresponding to that pg_data_t is able to do hardware memory encryption. Signed-off-by: Martin Fernandez <martin.fernandez@eclypsium.com>

Add a new member in e820_entry to hold whether an entry is able to do hardware memory encryption or not. Signed-off-by: Martin Fernandez <martin.fernandez@eclypsium.com>

Iterate over the EFI memmap finding the contiguous regions that are able to do hardware encryption (ie, those who have the EFI_MEMORY_CPU_CRYPTO enabled) and mark those in the e820_table. Signed-off-by: Martin Fernandez <martin.fernandez@eclypsium.com>

Show in each node in sysfs if its memory is able to do hardware memory encryption, ie. if all its memory is marked with EFI_MEMORY_CPU_CRYPTO in the EFI memory map. This value will only be shown if the memory is local to at least one CPU, since otherwise it won't be able to be encrypted by CPU's cryptographic capabilities. This check is done against the ACPI's SRAT table. Signed-off-by: Martin Fernandez <martin.fernandez@eclypsium.com>

hughsie · 2021-10-27T14:12:06Z

Documentation/ABI/testing/sysfs-devices-node

+		system memory is capable of being protected with the
+		CPU’s memory cryptographic capabilities. It is 0
+		otherwise. This attribute will only be available if
+		node X is in ACPI's SRAT table or it's an emulated


maybe if it is as you have space

hughsie · 2021-10-27T14:13:02Z

arch/x86/kernel/e820.c

+	int i;
+	u64 end = start + size;
+
+	for (i = 0; i < e820_table->nr_entries; i++) {


does this subsystem do C99 style for (int i = 0; i?

hughsie · 2021-10-27T14:14:35Z

drivers/base/node.c

+
+		if (node_devices[nid]->cpu_local)
+			result = attr->mode;
+		/* Else: hide the attribute */


does this subsubsystem use /* Else: hide the attribute */ or /* else: hide the attribute */?

Not sure tho, grepping shows that almost everyone uses /* else: */, although I don't think it's a common technique in the kernel. There is nothing about it in the coding style doc, and checkpatch.pl also didn't tell me anything.

I'll use the lowercase, just in case.

If the device file was opened prior to fw being available (such as from initrd before rootfs is mounted, when the initrd does not contain GPU fw), that would cause a later crash when the dev file is closed due to unitialized submitqueues list: CPU: 4 PID: 263 Comm: plymouthd Tainted: G W 5.15.0-rc2-next-20210924 #2 Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_submitqueue_close+0x30/0x190 [msm] lr : msm_postclose+0x54/0xf0 [msm] sp : ffff80001074bb80 x29: ffff80001074bb80 x28: ffff03ad80c4db80 x27: ffff03ad80dc5ab0 x26: 0000000000000000 x25: ffff03ad80dc5af8 x24: ffff03ad81e90800 x23: 0000000000000000 x22: ffff03ad81e90800 x21: ffff03ad8b35e788 x20: ffff03ad81e90878 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: ffffda15f14f7940 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000040 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffda15cd18ff88 x8 : ffff03ad80c4db80 x7 : 0000000000000228 x6 : 0000000000000000 x5 : 1793a4e807e636bd x4 : ffff03ad80c4db80 x3 : ffff03ad81e90878 x2 : 0000000000000000 x1 : ffff03ad80c4db80 x0 : 0000000000000000 Call trace: msm_submitqueue_close+0x30/0x190 [msm] msm_postclose+0x54/0xf0 [msm] drm_file_free.part.0+0x1cc/0x2e0 [drm] drm_close_helper.isra.0+0x74/0x84 [drm] drm_release+0x78/0x120 [drm] __fput+0x78/0x23c ____fput+0x1c/0x30 task_work_run+0xcc/0x22c do_exit+0x304/0x9f4 do_group_exit+0x44/0xb0 __wake_up_parent+0x0/0x3c invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x4c/0xf4 do_el0_svc+0x30/0x9c el0_svc+0x20/0x60 el0t_64_sync_handler+0xe8/0xf0 el0t_64_sync+0x1a0/0x1a4 Code: aa0003f5 a90153f3 f8408eb3 aa1303e0 (f85e8674) ---[ end trace 39b2fa37509a2be2 ]--- Fixing recursive fault but reboot is needed! Fixes: 86c2a0f drm/msm: ("Small submitqueue creation cleanup") Reported-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Rob Clark <robdclark@chromium.org>

Pablo Neira Ayuso says: ==================== Netfilter fixes for net (v2) The following patchset contains Netfilter fixes for net: 1) Move back the defrag users fields to the global netns_nf area. Kernel fails to boot if conntrack is builtin and kernel is booted with: nf_conntrack.enable_hooks=1. From Florian Westphal. 2) Rule event notification is missing relevant context such as the position handle and the NLM_F_APPEND flag. 3) Rule replacement is expanded to add + delete using the existing rule handle, reverse order of this operation so it makes sense from rule notification standpoint. 4) Propagate to userspace the NLM_F_CREATE and NLM_F_EXCL flags from the rule notification path. Patches #2, #3 and #4 are used by 'nft monitor' and 'iptables-monitor' userspace utilities which are not correctly representing the following operations through netlink notifications: - rule insertions - rule addition/insertion from position handle - create table/chain/set/map/flowtable/... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Fix afs_launder_page() to set the starting position of the StoreData RPC at the offset into the page at which the modified data starts instead of at the beginning of the page (the iov_iter is correctly offset). The offset got lost during the conversion to passing an iov_iter into afs_store_data(). Changes: ver #2: - Use page_offset() rather than manually calculating it[1]. Fixes: bd80d8a ("afs: Use ITER_XARRAY for writing") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/YST/0e92OdSH0zjg@casper.infradead.org/ [1] Link: https://lore.kernel.org/r/162880783179.3421678.7795105718190440134.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162937512409.1449272.18441473411207824084.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162981148752.1901565.3663780601682206026.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163005741670.2472992.2073548908229887941.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163221839087.3143591.14278359695763025231.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163292980654.4004896.7134735179887998551.stgit@warthog.procyon.org.uk/ # v2

…ernel/git/at91/linux into arm/fixes AT91 fixes #2 for 5.15: - More fixes for AT91 platform power management code related to the introduction of sama7g5: - management of DDR3L regulator rails for sama7g5ek - loading of TLB on different cores - PIO controller slew-rate settings for sama7g5ek: be aligned with datasheet requirements. * tag 'at91-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs ARM: at91: pm: preload base address of controllers in tlb ARM: at91: pm: group constants and addresses loading ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail Link: https://lore.kernel.org/r/20211004114344.19304-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>

@jakub

Justin Iurman says: ==================== Correct the IOAM behavior for undefined trace type bits (@jakub @david: there will be a conflict for #2 when merging net->net-next, due to commit [1]. The conflict is only 5-10 lines for #2 (#1 should be fine) inside the file tools/testing/selftests/net/ioam6.sh, so quite short though possibly ugly. Sorry for that, I didn't expect to post this one... Had I known, I'd have made the opposite.) Modify both the input and output behaviors regarding the trace type when one of the undefined bits is set. The goal is to keep the interoperability when new fields (aka new bits inside the range 12-21) will be defined. The draft [2] says the following: --------------------------------------------------------------- "Bit 12-21 Undefined. These values are available for future assignment in the IOAM Trace-Type Registry (Section 8.2). Every future node data field corresponding to one of these bits MUST be 4-octets long. An IOAM encapsulating node MUST set the value of each undefined bit to 0. If an IOAM transit node receives a packet with one or more of these bits set to 1, it MUST either: 1. Add corresponding node data filled with the reserved value 0xFFFFFFFF, after the node data fields for the IOAM-Trace-Type bits defined above, such that the total node data added by this node in units of 4-octets is equal to NodeLen, or 2. Not add any node data fields to the packet, even for the IOAM-Trace-Type bits defined above." --------------------------------------------------------------- The output behavior has been modified to respect the fact that "an IOAM encap node MUST set the value of each undefined bit to 0" (i.e., undefined bits can't be set anymore). As for the input behavior, current implementation is based on the second choice (i.e., "not add any data fields to the packet [...]"). With this solution, any interoperability is lost (i.e., if a new bit is defined, then an "old" kernel implementation wouldn't fill IOAM data when such new bit is set inside the trace type). The input behavior is therefore relaxed and these undefined bits are now allowed to be set. It is only possible thanks to the sentence "every future node data field corresponding to one of these bits MUST be 4-octets long". Indeed, the default empty value (the one for 4-octet fields) is inserted whenever an undefined bit is set. [1] cfbe9b0 [2] https://datatracker.ietf.org/doc/html/draft-ietf-ippm-ioam-data#section-5.4.1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.15, take #2 - Properly refcount pages used as a concatenated stage-2 PGD - Fix missing unlock when detecting the use of MTE+VM_SHARED

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 #2 0x55defe6397e4 in symbol__hists util/annotate.c:952 #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 torvalds#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 torvalds#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 torvalds#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 torvalds#9 0x55defe731e38 in machines__deliver_event util/session.c:1510 torvalds#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 torvalds#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 torvalds#12 0x55defe740082 in do_flush util/ordered-events.c:244 torvalds#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 torvalds#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 torvalds#15 0x55defe73837f in __perf_session__process_events util/session.c:2390 torvalds#16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Often some test cases like btrfs/161 trigger lockdep splats that complain about possible unsafe lock scenario due to the fact that during mount, when reading the chunk tree we end up calling blkdev_get_by_path() while holding a read lock on a leaf of the chunk tree. That produces a lockdep splat like the following: [ 3653.683975] ====================================================== [ 3653.685148] WARNING: possible circular locking dependency detected [ 3653.686301] 5.15.0-rc7-btrfs-next-103 #1 Not tainted [ 3653.687239] ------------------------------------------------------ [ 3653.688400] mount/447465 is trying to acquire lock: [ 3653.689320] ffff8c6b0c76e528 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.691054] but task is already holding lock: [ 3653.692155] ffff8c6b0a9f39e0 (btrfs-chunk-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 3653.693978] which lock already depends on the new lock. [ 3653.695510] the existing dependency chain (in reverse order) is: [ 3653.696915] -> #3 (btrfs-chunk-00){++++}-{3:3}: [ 3653.698053] down_read_nested+0x4b/0x140 [ 3653.698893] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 3653.699988] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 3653.701205] btrfs_search_slot+0x537/0xc00 [btrfs] [ 3653.702234] btrfs_insert_empty_items+0x32/0x70 [btrfs] [ 3653.703332] btrfs_init_new_device+0x563/0x15b0 [btrfs] [ 3653.704439] btrfs_ioctl+0x2110/0x3530 [btrfs] [ 3653.705405] __x64_sys_ioctl+0x83/0xb0 [ 3653.706215] do_syscall_64+0x3b/0xc0 [ 3653.706990] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.708040] -> #2 (sb_internal#2){.+.+}-{0:0}: [ 3653.708994] lock_release+0x13d/0x4a0 [ 3653.709533] up_write+0x18/0x160 [ 3653.710017] btrfs_sync_file+0x3f3/0x5b0 [btrfs] [ 3653.710699] __loop_update_dio+0xbd/0x170 [loop] [ 3653.711360] lo_ioctl+0x3b1/0x8a0 [loop] [ 3653.711929] block_ioctl+0x48/0x50 [ 3653.712442] __x64_sys_ioctl+0x83/0xb0 [ 3653.712991] do_syscall_64+0x3b/0xc0 [ 3653.713519] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.714233] -> #1 (&lo->lo_mutex){+.+.}-{3:3}: [ 3653.715026] __mutex_lock+0x92/0x900 [ 3653.715648] lo_open+0x28/0x60 [loop] [ 3653.716275] blkdev_get_whole+0x28/0x90 [ 3653.716867] blkdev_get_by_dev.part.0+0x142/0x320 [ 3653.717537] blkdev_open+0x5e/0xa0 [ 3653.718043] do_dentry_open+0x163/0x390 [ 3653.718604] path_openat+0x3f0/0xa80 [ 3653.719128] do_filp_open+0xa9/0x150 [ 3653.719652] do_sys_openat2+0x97/0x160 [ 3653.720197] __x64_sys_openat+0x54/0x90 [ 3653.720766] do_syscall_64+0x3b/0xc0 [ 3653.721285] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.721986] -> #0 (&disk->open_mutex){+.+.}-{3:3}: [ 3653.722775] __lock_acquire+0x130e/0x2210 [ 3653.723348] lock_acquire+0xd7/0x310 [ 3653.723867] __mutex_lock+0x92/0x900 [ 3653.724394] blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.725041] blkdev_get_by_path+0xb8/0xd0 [ 3653.725614] btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs] [ 3653.726332] open_fs_devices+0xd7/0x2c0 [btrfs] [ 3653.726999] btrfs_read_chunk_tree+0x3ad/0x870 [btrfs] [ 3653.727739] open_ctree+0xb8e/0x17bf [btrfs] [ 3653.728384] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 3653.729130] legacy_get_tree+0x30/0x50 [ 3653.729676] vfs_get_tree+0x28/0xc0 [ 3653.730192] vfs_kern_mount.part.0+0x71/0xb0 [ 3653.730800] btrfs_mount+0x11d/0x3a0 [btrfs] [ 3653.731427] legacy_get_tree+0x30/0x50 [ 3653.731970] vfs_get_tree+0x28/0xc0 [ 3653.732486] path_mount+0x2d4/0xbe0 [ 3653.732997] __x64_sys_mount+0x103/0x140 [ 3653.733560] do_syscall_64+0x3b/0xc0 [ 3653.734080] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.734782] other info that might help us debug this: [ 3653.735784] Chain exists of: &disk->open_mutex --> sb_internal#2 --> btrfs-chunk-00 [ 3653.737123] Possible unsafe locking scenario: [ 3653.737865] CPU0 CPU1 [ 3653.738435] ---- ---- [ 3653.739007] lock(btrfs-chunk-00); [ 3653.739449] lock(sb_internal#2); [ 3653.740193] lock(btrfs-chunk-00); [ 3653.740955] lock(&disk->open_mutex); [ 3653.741431] *** DEADLOCK *** [ 3653.742176] 3 locks held by mount/447465: [ 3653.742739] #0: ffff8c6acf85c0e8 (&type->s_umount_key#44/1){+.+.}-{3:3}, at: alloc_super+0xd5/0x3b0 [ 3653.744114] #1: ffffffffc0b28f70 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x59/0x870 [btrfs] [ 3653.745563] #2: ffff8c6b0a9f39e0 (btrfs-chunk-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 3653.747066] stack backtrace: [ 3653.747723] CPU: 4 PID: 447465 Comm: mount Not tainted 5.15.0-rc7-btrfs-next-103 #1 [ 3653.748873] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 3653.750592] Call Trace: [ 3653.750967] dump_stack_lvl+0x57/0x72 [ 3653.751526] check_noncircular+0xf3/0x110 [ 3653.752136] ? stack_trace_save+0x4b/0x70 [ 3653.752748] __lock_acquire+0x130e/0x2210 [ 3653.753356] lock_acquire+0xd7/0x310 [ 3653.753898] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.754596] ? lock_is_held_type+0xe8/0x140 [ 3653.755125] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.755729] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.756338] __mutex_lock+0x92/0x900 [ 3653.756794] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.757400] ? do_raw_spin_unlock+0x4b/0xa0 [ 3653.757930] ? _raw_spin_unlock+0x29/0x40 [ 3653.758437] ? bd_prepare_to_claim+0x129/0x150 [ 3653.758999] ? trace_module_get+0x2b/0xd0 [ 3653.759508] ? try_module_get.part.0+0x50/0x80 [ 3653.760072] blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.760661] ? devcgroup_check_permission+0xc1/0x1f0 [ 3653.761288] blkdev_get_by_path+0xb8/0xd0 [ 3653.761797] btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs] [ 3653.762454] open_fs_devices+0xd7/0x2c0 [btrfs] [ 3653.763055] ? clone_fs_devices+0x8f/0x170 [btrfs] [ 3653.763689] btrfs_read_chunk_tree+0x3ad/0x870 [btrfs] [ 3653.764370] ? kvm_sched_clock_read+0x14/0x40 [ 3653.764922] open_ctree+0xb8e/0x17bf [btrfs] [ 3653.765493] ? super_setup_bdi_name+0x79/0xd0 [ 3653.766043] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 3653.766780] ? rcu_read_lock_sched_held+0x3f/0x80 [ 3653.767488] ? kfree+0x1f2/0x3c0 [ 3653.767979] legacy_get_tree+0x30/0x50 [ 3653.768548] vfs_get_tree+0x28/0xc0 [ 3653.769076] vfs_kern_mount.part.0+0x71/0xb0 [ 3653.769718] btrfs_mount+0x11d/0x3a0 [btrfs] [ 3653.770381] ? rcu_read_lock_sched_held+0x3f/0x80 [ 3653.771086] ? kfree+0x1f2/0x3c0 [ 3653.771574] legacy_get_tree+0x30/0x50 [ 3653.772136] vfs_get_tree+0x28/0xc0 [ 3653.772673] path_mount+0x2d4/0xbe0 [ 3653.773201] __x64_sys_mount+0x103/0x140 [ 3653.773793] do_syscall_64+0x3b/0xc0 [ 3653.774333] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.775094] RIP: 0033:0x7f648bc45aaa This happens because through btrfs_read_chunk_tree(), which is called only during mount, ends up acquiring the mutex open_mutex of a block device while holding a read lock on a leaf of the chunk tree while other paths need to acquire other locks before locking extent buffers of the chunk tree. Since at mount time when we call btrfs_read_chunk_tree() we know that we don't have other tasks running in parallel and modifying the chunk tree, we can simply skip locking of chunk tree extent buffers. So do that and move the assertion that checks the fs is not yet mounted to the top block of btrfs_read_chunk_tree(), with a comment before doing it. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

Ido Schimmel says: ==================== mlxsw: Two small fixes Patch #1 fixes a recent regression that prevents the driver from loading with old firmware versions. Patch #2 protects the driver from a NULL pointer dereference when working on top of a buggy firmware. This was never observed in an actual system, only on top of an emulator during development. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…_lock Taking sb_writers whilst holding mmap_lock isn't allowed and will result in a lockdep warning like that below. The problem comes from cachefiles needing to take the sb_writers lock in order to do a write to the cache, but being asked to do this by netfslib called from readpage, readahead or write_begin[1]. Fix this by always offloading the write to the cache off to a worker thread. The main thread doesn't need to wait for it, so deadlock can be avoided. This can be tested by running the quick xfstests on something like afs or ceph with lockdep enabled. WARNING: possible circular locking dependency detected 5.15.0-rc1-build2+ torvalds#292 Not tainted ------------------------------------------------------ holetest/65517 is trying to acquire lock: ffff88810c81d730 (mapping.invalidate_lock#3){.+.+}-{3:3}, at: filemap_fault+0x276/0x7a5 but task is already holding lock: ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&mm->mmap_lock#2){++++}-{3:3}: validate_chain+0x3c4/0x4a8 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b __might_fault+0x87/0xb1 strncpy_from_user+0x25/0x18c removexattr+0x7c/0xe5 __do_sys_fremovexattr+0x73/0x96 do_syscall_64+0x67/0x7a entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (sb_writers#10){.+.+}-{0:0}: validate_chain+0x3c4/0x4a8 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b cachefiles_write+0x2b3/0x4bb netfs_rreq_do_write_to_cache+0x3b5/0x432 netfs_readpage+0x2de/0x39d filemap_read_page+0x51/0x94 filemap_get_pages+0x26f/0x413 filemap_read+0x182/0x427 new_sync_read+0xf0/0x161 vfs_read+0x118/0x16e ksys_read+0xb8/0x12e do_syscall_64+0x67/0x7a entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (mapping.invalidate_lock#3){.+.+}-{3:3}: check_noncircular+0xe4/0x129 check_prev_add+0x16b/0x3a4 validate_chain+0x3c4/0x4a8 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b down_read+0x40/0x4a filemap_fault+0x276/0x7a5 __do_fault+0x96/0xbf do_fault+0x262/0x35a __handle_mm_fault+0x171/0x1b5 handle_mm_fault+0x12a/0x233 do_user_addr_fault+0x3d2/0x59c exc_page_fault+0x85/0xa5 asm_exc_page_fault+0x1e/0x30 other info that might help us debug this: Chain exists of: mapping.invalidate_lock#3 --> sb_writers#10 --> &mm->mmap_lock#2 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mm->mmap_lock#2); lock(sb_writers#10); lock(&mm->mmap_lock#2); lock(mapping.invalidate_lock#3); *** DEADLOCK *** 1 lock held by holetest/65517: #0: ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c stack backtrace: CPU: 0 PID: 65517 Comm: holetest Not tainted 5.15.0-rc1-build2+ torvalds#292 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: dump_stack_lvl+0x45/0x59 check_noncircular+0xe4/0x129 ? print_circular_bug+0x207/0x207 ? validate_chain+0x461/0x4a8 ? add_chain_block+0x88/0xd9 ? hlist_add_head_rcu+0x49/0x53 check_prev_add+0x16b/0x3a4 validate_chain+0x3c4/0x4a8 ? check_prev_add+0x3a4/0x3a4 ? mark_lock+0xa5/0x1c6 __lock_acquire+0x89d/0x949 lock_acquire+0x2dc/0x34b ? filemap_fault+0x276/0x7a5 ? rcu_read_unlock+0x59/0x59 ? add_to_page_cache_lru+0x13c/0x13c ? lock_is_held_type+0x7b/0xd3 down_read+0x40/0x4a ? filemap_fault+0x276/0x7a5 filemap_fault+0x276/0x7a5 ? pagecache_get_page+0x2dd/0x2dd ? __lock_acquire+0x8bc/0x949 ? pte_offset_kernel.isra.0+0x6d/0xc3 __do_fault+0x96/0xbf ? do_fault+0x124/0x35a do_fault+0x262/0x35a ? handle_pte_fault+0x1c1/0x20d __handle_mm_fault+0x171/0x1b5 ? handle_pte_fault+0x20d/0x20d ? __lock_release+0x151/0x254 ? mark_held_locks+0x1f/0x78 ? rcu_read_unlock+0x3a/0x59 handle_mm_fault+0x12a/0x233 do_user_addr_fault+0x3d2/0x59c ? pgtable_bad+0x70/0x70 ? rcu_read_lock_bh_held+0xab/0xab exc_page_fault+0x85/0xa5 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x40192f Code: ff 48 89 c3 48 8b 05 50 28 00 00 48 85 ed 7e 23 31 d2 4b 8d 0c 2f eb 0a 0f 1f 00 48 8b 05 39 28 00 00 48 0f af c2 48 83 c2 01 <48> 89 1c 01 48 39 d5 7f e8 8b 0d f2 27 00 00 31 c0 85 c9 74 0e 8b RSP: 002b:00007f9931867eb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00007f9931868700 RCX: 00007f993206ac00 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00007ffc13e06ee0 RBP: 0000000000000100 R08: 0000000000000000 R09: 00007f9931868700 R10: 00007f99318689d0 R11: 0000000000000202 R12: 00007ffc13e06ee0 R13: 0000000000000c00 R14: 00007ffc13e06e00 R15: 00007f993206a000 Fixes: 726218f ("netfs: Define an interface to talk to a cache") Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jeff Layton <jlayton@kernel.org> cc: Jan Kara <jack@suse.cz> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210922110420.GA21576@quack2.suse.cz/ [1] Link: https://lore.kernel.org/r/163887597541.1596626.2668163316598972956.stgit@warthog.procyon.org.uk/ # v1

In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a CPP area structure. But in line 807 (#2), when the cache is allocated failed, this CPP area structure is not freed, which will result in memory leak. We can fix it by freeing the CPP area when the cache is allocated failed (#2). 792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size) 793 { 794 struct nfp_cpp_area_cache *cache; 795 struct nfp_cpp_area *area; 800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0), 801 0, size); // #1: allocates and initializes 802 if (!area) 803 return -ENOMEM; 805 cache = kzalloc(sizeof(*cache), GFP_KERNEL); 806 if (!cache) 807 return -ENOMEM; // #2: missing free 817 return 0; 818 } Fixes: 4cb584e ("nfp: add CPP access core") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Acked-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20211209061511.122535-1-niejianglei2021@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says: ==================== mlxsw: MAC profiles occupancy fix Patch #1 fixes a router interface (RIF) MAC profiles occupancy bug that was merged in the last cycle. Patch #2 adds a selftest that fails without the fix. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(), but when the function returns in line 1184 (#4) victim_name allocated by line 1169 (#3) is not freed, which will lead to a memory leak. There is a similar snippet of code in this function as allocating a memory chunk for victim_name in line 1104 (#1) as well as releasing the memory in line 1116 (#2). We should kfree() victim_name when the return value of backref_in_log() is less than zero and before the function returns in line 1184 (#4). 1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans, 1058 struct btrfs_root *root, 1059 struct btrfs_path *path, 1060 struct btrfs_root *log_root, 1061 struct btrfs_inode *dir, 1062 struct btrfs_inode *inode, 1063 u64 inode_objectid, u64 parent_objectid, 1064 u64 ref_index, char *name, int namelen, 1065 int *search_done) 1066 { 1104 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #1: kmalloc (victim_name-1) 1105 if (!victim_name) 1106 return -ENOMEM; 1112 ret = backref_in_log(log_root, &search_key, 1113 parent_objectid, victim_name, 1114 victim_name_len); 1115 if (ret < 0) { 1116 kfree(victim_name); // #2: kfree (victim_name-1) 1117 return ret; 1118 } else if (!ret) { 1169 victim_name = kmalloc(victim_name_len, GFP_NOFS); // #3: kmalloc (victim_name-2) 1170 if (!victim_name) 1171 return -ENOMEM; 1180 ret = backref_in_log(log_root, &search_key, 1181 parent_objectid, victim_name, 1182 victim_name_len); 1183 if (ret < 0) { 1184 return ret; // #4: missing kfree (victim_name-2) 1185 } else if (!ret) { 1241 return 0; 1242 } Fixes: d3316c8 ("btrfs: Properly handle backref_in_log retval") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

The fixed commit attempts to close inject.output even if it was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 48 iofclose.c: No such file or directory. (gdb) bt #0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48 #1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376 #2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085 #3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313 #4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 #5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 torvalds#6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539 (gdb) Fixes: 02e6246 ("perf inject: Close inject.output on exit") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The fixed commit attempts to get the output file descriptor even if the file was never opened e.g. $ perf record uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ] $ perf inject -i perf.data --vm-time-correlation=dry-run Segmentation fault (core dumped) $ gdb --quiet perf Reading symbols from perf... (gdb) r inject -i perf.data --vm-time-correlation=dry-run Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Program received signal SIGSEGV, Segmentation fault. __GI___fileno (fp=0x0) at fileno.c:35 35 fileno.c: No such file or directory. (gdb) bt #0 __GI___fileno (fp=0x0) at fileno.c:35 #1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72 #2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69 #3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017 #4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313 #5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365 torvalds#6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409 torvalds#7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539 (gdb) Fixes: 0ae0389 ("perf tools: Pass a fd to perf_file_header__read_pipe()") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20211213084829.114772-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Hayes Wang says: ==================== r8152: fix bugs Patch #1 fix the issue of force speed mode for RTL8156. Patch #2 fix the issue of unexpected ocp_base. ==================== Link: https://lore.kernel.org/r/20211223092702.23841-386-nic_swsd@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

… devices Suppose we have an environment with a number of non-NPIV FCP devices (virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical FCP channel (HBA port) and its I_T nexus. Plus a number of storage target ports zoned to such shared channel. Now one target port logs out of the fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port recovery depending on the ADISC result. This happens on all such FCP devices (in different Linux images) concurrently as they all receive a copy of this RSCN. In the following we look at one of those FCP devices. Requests other than FSF_QTCB_FCP_CMND can be slow until they get a response. Depending on which requests are affected by slow responses, there are different recovery outcomes. Here we want to fix failed recoveries on port or adapter level by avoiding recovery requests that can be slow. We need the cached N_Port_ID for the remote port "link" test with ADISC. Just before sending the ADISC, we now intentionally forget the old cached N_Port_ID. The idea is that on receiving an RSCN for a port, we have to assume that any cached information about this port is stale. This forces a fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for the same port. Since we typically can still communicate with the nameserver efficiently, we now reach steady state quicker: Either the nameserver still does not know about the port so we stop recovery, or the nameserver already knows the port potentially with a new N_Port_ID and we can successfully and quickly perform open port recovery. For the one case, where ADISC returns successfully, we re-initialize port->d_id because that case does not involve any port recovery. This also solves a problem if the storage WWPN quickly logs into the fabric again but with a different N_Port_ID. Such as on virtual WWPN takeover during target NPIV failover. [https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the RSCN from the storage FDISC was ignored by zfcp and we could not successfully recover the failover. On some later failback on the storage, we could have been lucky if the virtual WWPN got the same old N_Port_ID from the SAN switch as we still had cached. Then the related RSCN triggered a successful port reopen recovery. However, there is no guarantee to get the same N_Port_ID on NPIV FDISC. Even though NPIV-enabled FCP devices are not affected by this problem, this code change optimizes recovery time for gone remote ports as a side effect. The timely drop of cached N_Port_IDs prevents unnecessary slow open port attempts. While the problem might have been in code before v2.6.32 commit 799b76d ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix depends on the gid_pn_work introduced with that commit, so we mark it as culprit to satisfy fix dependencies. Note: Point-to-point remote port is already handled separately and gets its N_Port_ID from the cached peer_d_id. So resetting port->d_id in general does not affect PtP. Link: https://lore.kernel.org/r/20220118165803.3667947-1-maier@linux.ibm.com Fixes: 799b76d ("[SCSI] zfcp: Decouple gid_pn requests from erp") Cc: <stable@vger.kernel.org> #2.6.32+ Suggested-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add a test that sends large udp packet (which is fragmented) via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4' and check that the datagram is received by peer. On kernels without commit 4e1860a ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")', this will fail with: cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty -rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS -rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF ERROR: in and output file mismatch when checking udp with stateless nat FAIL: nftables v1.0.0 (Fearless Fosdick #2) On patched kernels, this will show: PASS: IP statless for ns2-PFp89amx Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Fix the following false positive warning: ============================= WARNING: suspicious RCU usage 5.16.0-rc4+ torvalds#57 Not tainted ----------------------------- arch/x86/kvm/../../../virt/kvm/eventfd.c:484 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by fc_vcpu 0/330: #0: ffff8884835fc0b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x88/0x6f0 [kvm] #1: ffffc90004c0bb68 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0x600/0x1860 [kvm] #2: ffffc90004c0c1d0 (&kvm->irq_srcu){....}-{0:0}, at: kvm_notify_acked_irq+0x36/0x180 [kvm] stack backtrace: CPU: 26 PID: 330 Comm: fc_vcpu 0 Not tainted 5.16.0-rc4+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x44/0x57 kvm_notify_acked_gsi+0x6b/0x70 [kvm] kvm_notify_acked_irq+0x8d/0x180 [kvm] kvm_ioapic_update_eoi+0x92/0x240 [kvm] kvm_apic_set_eoi_accelerated+0x2a/0xe0 [kvm] handle_apic_eoi_induced+0x3d/0x60 [kvm_intel] vmx_handle_exit+0x19c/0x6a0 [kvm_intel] vcpu_enter_guest+0x66e/0x1860 [kvm] kvm_arch_vcpu_ioctl_run+0x438/0x7f0 [kvm] kvm_vcpu_ioctl+0x38a/0x6f0 [kvm] __x64_sys_ioctl+0x89/0xc0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Since kvm_unregister_irq_ack_notifier() does synchronize_srcu(&kvm->irq_srcu), kvm->irq_ack_notifier_list is protected by kvm->irq_srcu. In fact, kvm->irq_srcu SRCU read lock is held in kvm_notify_acked_irq(), making it a false positive warning. So use hlist_for_each_entry_srcu() instead of hlist_for_each_entry_rcu(). Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com> Message-Id: <f98bac4f5052bad2c26df9ad50f7019e40434512.1643265976.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Quota disable ioctl starts a transaction before waiting for the qgroup rescan worker completes. However, this wait can be infinite and results in deadlock because of circular dependency among the quota disable ioctl, the qgroup rescan worker and the other task with transaction such as block group relocation task. The deadlock happens with the steps following: 1) Task A calls ioctl to disable quota. It starts a transaction and waits for qgroup rescan worker completes. 2) Task B such as block group relocation task starts a transaction and joins to the transaction that task A started. Then task B commits to the transaction. In this commit, task B waits for a commit by task A. 3) Task C as the qgroup rescan worker starts its job and starts a transaction. In this transaction start, task C waits for completion of the transaction that task A started and task B committed. This deadlock was found with fstests test case btrfs/115 and a zoned null_blk device. The test case enables and disables quota, and the block group reclaim was triggered during the quota disable by chance. The deadlock was also observed by running quota enable and disable in parallel with 'btrfs balance' command on regular null_blk devices. An example report of the deadlock: [372.469894] INFO: task kworker/u16:6:103 blocked for more than 122 seconds. [372.479944] Not tainted 5.16.0-rc8 torvalds#7 [372.485067] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.493898] task:kworker/u16:6 state:D stack: 0 pid: 103 ppid: 2 flags:0x00004000 [372.503285] Workqueue: btrfs-qgroup-rescan btrfs_work_helper [btrfs] [372.510782] Call Trace: [372.514092] <TASK> [372.521684] __schedule+0xb56/0x4850 [372.530104] ? io_schedule_timeout+0x190/0x190 [372.538842] ? lockdep_hardirqs_on+0x7e/0x100 [372.547092] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.555591] schedule+0xe0/0x270 [372.561894] btrfs_commit_transaction+0x18bb/0x2610 [btrfs] [372.570506] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [372.578875] ? free_unref_page+0x3f2/0x650 [372.585484] ? finish_wait+0x270/0x270 [372.591594] ? release_extent_buffer+0x224/0x420 [btrfs] [372.599264] btrfs_qgroup_rescan_worker+0xc13/0x10c0 [btrfs] [372.607157] ? lock_release+0x3a9/0x6d0 [372.613054] ? btrfs_qgroup_account_extent+0xda0/0xda0 [btrfs] [372.620960] ? do_raw_spin_lock+0x11e/0x250 [372.627137] ? rwlock_bug.part.0+0x90/0x90 [372.633215] ? lock_is_held_type+0xe4/0x140 [372.639404] btrfs_work_helper+0x1ae/0xa90 [btrfs] [372.646268] process_one_work+0x7e9/0x1320 [372.652321] ? lock_release+0x6d0/0x6d0 [372.658081] ? pwq_dec_nr_in_flight+0x230/0x230 [372.664513] ? rwlock_bug.part.0+0x90/0x90 [372.670529] worker_thread+0x59e/0xf90 [372.676172] ? process_one_work+0x1320/0x1320 [372.682440] kthread+0x3b9/0x490 [372.687550] ? _raw_spin_unlock_irq+0x24/0x50 [372.693811] ? set_kthread_struct+0x100/0x100 [372.700052] ret_from_fork+0x22/0x30 [372.705517] </TASK> [372.709747] INFO: task btrfs-transacti:2347 blocked for more than 123 seconds. [372.729827] Not tainted 5.16.0-rc8 torvalds#7 [372.745907] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [372.767106] task:btrfs-transacti state:D stack: 0 pid: 2347 ppid: 2 flags:0x00004000 [372.787776] Call Trace: [372.801652] <TASK> [372.812961] __schedule+0xb56/0x4850 [372.830011] ? io_schedule_timeout+0x190/0x190 [372.852547] ? lockdep_hardirqs_on+0x7e/0x100 [372.871761] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [372.886792] schedule+0xe0/0x270 [372.901685] wait_current_trans+0x22c/0x310 [btrfs] [372.919743] ? btrfs_put_transaction+0x3d0/0x3d0 [btrfs] [372.938923] ? finish_wait+0x270/0x270 [372.959085] ? join_transaction+0xc75/0xe30 [btrfs] [372.977706] start_transaction+0x938/0x10a0 [btrfs] [372.997168] transaction_kthread+0x19d/0x3c0 [btrfs] [373.013021] ? btrfs_cleanup_transaction.isra.0+0xfc0/0xfc0 [btrfs] [373.031678] kthread+0x3b9/0x490 [373.047420] ? _raw_spin_unlock_irq+0x24/0x50 [373.064645] ? set_kthread_struct+0x100/0x100 [373.078571] ret_from_fork+0x22/0x30 [373.091197] </TASK> [373.105611] INFO: task btrfs:3145 blocked for more than 123 seconds. [373.114147] Not tainted 5.16.0-rc8 torvalds#7 [373.120401] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [373.130393] task:btrfs state:D stack: 0 pid: 3145 ppid: 3141 flags:0x00004000 [373.140998] Call Trace: [373.145501] <TASK> [373.149654] __schedule+0xb56/0x4850 [373.155306] ? io_schedule_timeout+0x190/0x190 [373.161965] ? lockdep_hardirqs_on+0x7e/0x100 [373.168469] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [373.175468] schedule+0xe0/0x270 [373.180814] wait_for_commit+0x104/0x150 [btrfs] [373.187643] ? test_and_set_bit+0x20/0x20 [btrfs] [373.194772] ? kmem_cache_free+0x124/0x550 [373.201191] ? btrfs_put_transaction+0x69/0x3d0 [btrfs] [373.208738] ? finish_wait+0x270/0x270 [373.214704] ? __btrfs_end_transaction+0x347/0x7b0 [btrfs] [373.222342] btrfs_commit_transaction+0x44d/0x2610 [btrfs] [373.230233] ? join_transaction+0x255/0xe30 [btrfs] [373.237334] ? btrfs_record_root_in_trans+0x4d/0x170 [btrfs] [373.245251] ? btrfs_apply_pending_changes+0x50/0x50 [btrfs] [373.253296] relocate_block_group+0x105/0xc20 [btrfs] [373.260533] ? mutex_lock_io_nested+0x1270/0x1270 [373.267516] ? btrfs_wait_nocow_writers+0x85/0x180 [btrfs] [373.275155] ? merge_reloc_roots+0x710/0x710 [btrfs] [373.283602] ? btrfs_wait_ordered_extents+0xd30/0xd30 [btrfs] [373.291934] ? kmem_cache_free+0x124/0x550 [373.298180] btrfs_relocate_block_group+0x35c/0x930 [btrfs] [373.306047] btrfs_relocate_chunk+0x85/0x210 [btrfs] [373.313229] btrfs_balance+0x12f4/0x2d20 [btrfs] [373.320227] ? lock_release+0x3a9/0x6d0 [373.326206] ? btrfs_relocate_chunk+0x210/0x210 [btrfs] [373.333591] ? lock_is_held_type+0xe4/0x140 [373.340031] ? rcu_read_lock_sched_held+0x3f/0x70 [373.346910] btrfs_ioctl_balance+0x548/0x700 [btrfs] [373.354207] btrfs_ioctl+0x7f2/0x71b0 [btrfs] [373.360774] ? lockdep_hardirqs_on_prepare+0x410/0x410 [373.367957] ? lockdep_hardirqs_on_prepare+0x410/0x410 [373.375327] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs] [373.383841] ? find_held_lock+0x2c/0x110 [373.389993] ? lock_release+0x3a9/0x6d0 [373.395828] ? mntput_no_expire+0xf7/0xad0 [373.402083] ? lock_is_held_type+0xe4/0x140 [373.408249] ? vfs_fileattr_set+0x9f0/0x9f0 [373.414486] ? selinux_file_ioctl+0x349/0x4e0 [373.420938] ? trace_raw_output_lock+0xb4/0xe0 [373.427442] ? selinux_inode_getsecctx+0x80/0x80 [373.434224] ? lockdep_hardirqs_on+0x7e/0x100 [373.440660] ? force_qs_rnp+0x2a0/0x6b0 [373.446534] ? lock_is_held_type+0x9b/0x140 [373.452763] ? __blkcg_punt_bio_submit+0x1b0/0x1b0 [373.459732] ? security_file_ioctl+0x50/0x90 [373.466089] __x64_sys_ioctl+0x127/0x190 [373.472022] do_syscall_64+0x3b/0x90 [373.477513] entry_SYSCALL_64_after_hwframe+0x44/0xae [373.484823] RIP: 0033:0x7f8f4af7e2bb [373.490493] RSP: 002b:00007ffcbf936178 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [373.500197] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8f4af7e2bb [373.509451] RDX: 00007ffcbf936220 RSI: 00000000c4009420 RDI: 0000000000000003 [373.518659] RBP: 00007ffcbf93774a R08: 0000000000000013 R09: 00007f8f4b02d4e0 [373.527872] R10: 00007f8f4ae87740 R11: 0000000000000246 R12: 0000000000000001 [373.537222] R13: 00007ffcbf936220 R14: 0000000000000000 R15: 0000000000000002 [373.546506] </TASK> [373.550878] INFO: task btrfs:3146 blocked for more than 123 seconds. [373.559383] Not tainted 5.16.0-rc8 torvalds#7 [373.565748] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [373.575748] task:btrfs state:D stack: 0 pid: 3146 ppid: 2168 flags:0x00000000 [373.586314] Call Trace: [373.590846] <TASK> [373.595121] __schedule+0xb56/0x4850 [373.600901] ? __lock_acquire+0x23db/0x5030 [373.607176] ? io_schedule_timeout+0x190/0x190 [373.613954] schedule+0xe0/0x270 [373.619157] schedule_timeout+0x168/0x220 [373.625170] ? usleep_range_state+0x150/0x150 [373.631653] ? mark_held_locks+0x9e/0xe0 [373.637767] ? do_raw_spin_lock+0x11e/0x250 [373.643993] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [373.651267] ? _raw_spin_unlock_irq+0x24/0x50 [373.657677] ? lockdep_hardirqs_on+0x7e/0x100 [373.664103] wait_for_completion+0x163/0x250 [373.670437] ? bit_wait_timeout+0x160/0x160 [373.676585] btrfs_quota_disable+0x176/0x9a0 [btrfs] [373.683979] ? btrfs_quota_enable+0x12f0/0x12f0 [btrfs] [373.691340] ? down_write+0xd0/0x130 [373.696880] ? down_write_killable+0x150/0x150 [373.703352] btrfs_ioctl+0x3945/0x71b0 [btrfs] [373.710061] ? find_held_lock+0x2c/0x110 [373.716192] ? lock_release+0x3a9/0x6d0 [373.722047] ? __handle_mm_fault+0x23cd/0x3050 [373.728486] ? btrfs_ioctl_get_supported_features+0x20/0x20 [btrfs] [373.737032] ? set_pte+0x6a/0x90 [373.742271] ? do_raw_spin_unlock+0x55/0x1f0 [373.748506] ? lock_is_held_type+0xe4/0x140 [373.754792] ? vfs_fileattr_set+0x9f0/0x9f0 [373.761083] ? selinux_file_ioctl+0x349/0x4e0 [373.767521] ? selinux_inode_getsecctx+0x80/0x80 [373.774247] ? __up_read+0x182/0x6e0 [373.780026] ? count_memcg_events.constprop.0+0x46/0x60 [373.787281] ? up_write+0x460/0x460 [373.792932] ? security_file_ioctl+0x50/0x90 [373.799232] __x64_sys_ioctl+0x127/0x190 [373.805237] do_syscall_64+0x3b/0x90 [373.810947] entry_SYSCALL_64_after_hwframe+0x44/0xae [373.818102] RIP: 0033:0x7f1383ea02bb [373.823847] RSP: 002b:00007fffeb4d71f8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [373.833641] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1383ea02bb [373.842961] RDX: 00007fffeb4d7210 RSI: 00000000c0109428 RDI: 0000000000000003 [373.852179] RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078 [373.861408] R10: 00007f1383daec78 R11: 0000000000000202 R12: 00007fffeb4d874a [373.870647] R13: 0000000000493099 R14: 0000000000000001 R15: 0000000000000000 [373.879838] </TASK> [373.884018] Showing all locks held in the system: [373.894250] 3 locks held by kworker/4:1/58: [373.900356] 1 lock held by khungtaskd/63: [373.906333] #0: ffffffff8945ff60 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 [373.917307] 3 locks held by kworker/u16:6/103: [373.923938] #0: ffff888127b4f138 ((wq_completion)btrfs-qgroup-rescan){+.+.}-{0:0}, at: process_one_work+0x712/0x1320 [373.936555] #1: ffff88810b817dd8 ((work_completion)(&work->normal_work)){+.+.}-{0:0}, at: process_one_work+0x73f/0x1320 [373.951109] #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_qgroup_rescan_worker+0x1f6/0x10c0 [btrfs] [373.964027] 2 locks held by less/1803: [373.969982] #0: ffff88813ed56098 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80 [373.981295] #1: ffffc90000b3b2e8 (&ldata->atomic_read_lock){+.+.}-{3:3}, at: n_tty_read+0x9e2/0x1060 [373.992969] 1 lock held by btrfs-transacti/2347: [373.999893] #0: ffff88813d4887a8 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0xe3/0x3c0 [btrfs] [374.015872] 3 locks held by btrfs/3145: [374.022298] #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl_balance+0xc3/0x700 [btrfs] [374.034456] #1: ffff88813d48a0a0 (&fs_info->reclaim_bgs_lock){+.+.}-{3:3}, at: btrfs_balance+0xfe5/0x2d20 [btrfs] [374.047646] #2: ffff88813d488838 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_relocate_block_group+0x354/0x930 [btrfs] [374.063295] 4 locks held by btrfs/3146: [374.069647] #0: ffff888102dd4460 (sb_writers#18){.+.+}-{0:0}, at: btrfs_ioctl+0x38b1/0x71b0 [btrfs] [374.081601] #1: ffff88813d488bb8 (&fs_info->subvol_sem){+.+.}-{3:3}, at: btrfs_ioctl+0x38fd/0x71b0 [btrfs] [374.094283] #2: ffff888102dd4650 (sb_internal#2){.+.+}-{0:0}, at: btrfs_quota_disable+0xc8/0x9a0 [btrfs] [374.106885] #3: ffff88813d489800 (&fs_info->qgroup_ioctl_lock){+.+.}-{3:3}, at: btrfs_quota_disable+0xd5/0x9a0 [btrfs] [374.126780] ============================================= To avoid the deadlock, wait for the qgroup rescan worker to complete before starting the transaction for the quota disable ioctl. Clear BTRFS_FS_QUOTA_ENABLE flag before the wait and the transaction to request the worker to complete. On transaction start failure, set the BTRFS_FS_QUOTA_ENABLE flag again. These BTRFS_FS_QUOTA_ENABLE flag changes can be done safely since the function btrfs_quota_disable is not called concurrently because of fs_info->subvol_sem. Also check the BTRFS_FS_QUOTA_ENABLE flag in qgroup_rescan_init to avoid another qgroup rescan worker to start after the previous qgroup worker completed. CC: stable@vger.kernel.org # 5.4+ Suggested-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>

…egulator The interrupt pin of the external ethernet phy is used, instead of the enable-gpio pin of the tf-io regulator. The GPIOE_2 pin is located in the gpio_ao bank. This causes phy interrupt problems at system startup. [ 76.645190] irq 36: nobody cared (try booting with the "irqpoll" option) [ 76.649617] CPU: 0 PID: 1416 Comm: irq/36-0.0:00 Not tainted 5.16.0 #2 [ 76.649629] Hardware name: Hardkernel ODROID-HC4 (DT) [ 76.649635] Call trace: [ 76.649638] dump_backtrace+0x0/0x1c8 [ 76.649658] show_stack+0x14/0x60 [ 76.649667] dump_stack_lvl+0x64/0x7c [ 76.649676] dump_stack+0x14/0x2c [ 76.649683] __report_bad_irq+0x38/0xe8 [ 76.649695] note_interrupt+0x220/0x3a0 [ 76.649704] handle_irq_event_percpu+0x58/0x88 [ 76.649713] handle_irq_event+0x44/0xd8 [ 76.649721] handle_fasteoi_irq+0xa8/0x130 [ 76.649730] generic_handle_domain_irq+0x38/0x58 [ 76.649738] gic_handle_irq+0x9c/0xb8 [ 76.649747] call_on_irq_stack+0x28/0x38 [ 76.649755] do_interrupt_handler+0x7c/0x80 [ 76.649763] el1_interrupt+0x34/0x80 [ 76.649772] el1h_64_irq_handler+0x14/0x20 [ 76.649781] el1h_64_irq+0x74/0x78 [ 76.649788] irq_finalize_oneshot.part.56+0x68/0xf8 [ 76.649796] irq_thread_fn+0x5c/0x98 [ 76.649804] irq_thread+0x13c/0x260 [ 76.649812] kthread+0x144/0x178 [ 76.649822] ret_from_fork+0x10/0x20 [ 76.649830] handlers: [ 76.653170] [<0000000025a6cd31>] irq_default_primary_handler threaded [<0000000093580eb7>] phy_interrupt [ 76.661256] Disabling IRQ torvalds#36 Fixes: 1f80a5c ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator") Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: removed spurious invalid & blank lines from commit message] Link: https://lore.kernel.org/r/20220127130537.GA187347@odroid-VirtualBox

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.17, take #2 - A couple of fixes when handling an exception while a SError has been delivered - Workaround for Cortex-A510's single-step[ erratum

When using the flushoncommit mount option, during almost every transaction commit we trigger a warning from __writeback_inodes_sb_nr(): $ cat fs/fs-writeback.c: (...) static void __writeback_inodes_sb_nr(struct super_block *sb, ... { (...) WARN_ON(!rwsem_is_locked(&sb->s_umount)); (...) } (...) The trace produced in dmesg looks like the following: [947.473890] WARNING: CPU: 5 PID: 930 at fs/fs-writeback.c:2610 __writeback_inodes_sb_nr+0x7e/0xb3 [947.481623] Modules linked in: nfsd nls_cp437 cifs asn1_decoder cifs_arc4 fscache cifs_md4 ipmi_ssif [947.489571] CPU: 5 PID: 930 Comm: btrfs-transacti Not tainted 95.16.3-srb-asrock-00001-g36437ad63879 torvalds#186 [947.497969] RIP: 0010:__writeback_inodes_sb_nr+0x7e/0xb3 [947.502097] Code: 24 10 4c 89 44 24 18 c6 (...) [947.519760] RSP: 0018:ffffc90000777e10 EFLAGS: 00010246 [947.523818] RAX: 0000000000000000 RBX: 0000000000963300 RCX: 0000000000000000 [947.529765] RDX: 0000000000000000 RSI: 000000000000fa51 RDI: ffffc90000777e50 [947.535740] RBP: ffff888101628a90 R08: ffff888100955800 R09: ffff888100956000 [947.541701] R10: 0000000000000002 R11: 0000000000000001 R12: ffff888100963488 [947.547645] R13: ffff888100963000 R14: ffff888112fb7200 R15: ffff888100963460 [947.553621] FS: 0000000000000000(0000) GS:ffff88841fd40000(0000) knlGS:0000000000000000 [947.560537] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [947.565122] CR2: 0000000008be50c4 CR3: 000000000220c000 CR4: 00000000001006e0 [947.571072] Call Trace: [947.572354] <TASK> [947.573266] btrfs_commit_transaction+0x1f1/0x998 [947.576785] ? start_transaction+0x3ab/0x44e [947.579867] ? schedule_timeout+0x8a/0xdd [947.582716] transaction_kthread+0xe9/0x156 [947.585721] ? btrfs_cleanup_transaction.isra.0+0x407/0x407 [947.590104] kthread+0x131/0x139 [947.592168] ? set_kthread_struct+0x32/0x32 [947.595174] ret_from_fork+0x22/0x30 [947.597561] </TASK> [947.598553] ---[ end trace 644721052755541c ]--- This is because we started using writeback_inodes_sb() to flush delalloc when committing a transaction (when using -o flushoncommit), in order to avoid deadlocks with filesystem freeze operations. This change was made by commit ce8ea7c ("btrfs: don't call btrfs_start_delalloc_roots in flushoncommit"). After that change we started producing that warning, and every now and then a user reports this since the warning happens too often, it spams dmesg/syslog, and a user is unsure if this reflects any problem that might compromise the filesystem's reliability. We can not just lock the sb->s_umount semaphore before calling writeback_inodes_sb(), because that would at least deadlock with filesystem freezing, since at fs/super.c:freeze_super() sync_filesystem() is called while we are holding that semaphore in write mode, and that can trigger a transaction commit, resulting in a deadlock. It would also trigger the same type of deadlock in the unmount path. Possibly, it could also introduce some other locking dependencies that lockdep would report. To fix this call try_to_writeback_inodes_sb() instead of writeback_inodes_sb(), because that will try to read lock sb->s_umount and then will only call writeback_inodes_sb() if it was able to lock it. This is fine because the cases where it can't read lock sb->s_umount are during a filesystem unmount or during a filesystem freeze - in those cases sb->s_umount is write locked and sync_filesystem() is called, which calls writeback_inodes_sb(). In other words, in all cases where we can't take a read lock on sb->s_umount, writeback is already being triggered elsewhere. An alternative would be to call btrfs_start_delalloc_roots() with a number of pages different from LONG_MAX, for example matching the number of delalloc bytes we currently have, in which case we would end up starting all delalloc with filemap_fdatawrite_wbc() and not with an async flush via filemap_flush() - that is only possible after the rather recent commit e076ab2 ("btrfs: shrink delalloc pages instead of full inodes"). However that creates a whole new can of worms due to new lock dependencies, which lockdep complains, like for example: [ 8948.247280] ====================================================== [ 8948.247823] WARNING: possible circular locking dependency detected [ 8948.248353] 5.17.0-rc1-btrfs-next-111 #1 Not tainted [ 8948.248786] ------------------------------------------------------ [ 8948.249320] kworker/u16:18/933570 is trying to acquire lock: [ 8948.249812] ffff9b3de1591690 (sb_internal#2){.+.+}-{0:0}, at: find_free_extent+0x141e/0x1590 [btrfs] [ 8948.250638] but task is already holding lock: [ 8948.251140] ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.252018] which lock already depends on the new lock. [ 8948.252710] the existing dependency chain (in reverse order) is: [ 8948.253343] -> #2 (&root->delalloc_mutex){+.+.}-{3:3}: [ 8948.253950] __mutex_lock+0x90/0x900 [ 8948.254354] start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.254859] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.255408] btrfs_commit_transaction+0x32f/0xc00 [btrfs] [ 8948.255942] btrfs_mksubvol+0x380/0x570 [btrfs] [ 8948.256406] btrfs_mksnapshot+0x81/0xb0 [btrfs] [ 8948.256870] __btrfs_ioctl_snap_create+0x17f/0x190 [btrfs] [ 8948.257413] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [ 8948.257961] btrfs_ioctl+0x1196/0x3630 [btrfs] [ 8948.258418] __x64_sys_ioctl+0x83/0xb0 [ 8948.258793] do_syscall_64+0x3b/0xc0 [ 8948.259146] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8948.259709] -> #1 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}: [ 8948.260330] __mutex_lock+0x90/0x900 [ 8948.260692] btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs] [ 8948.261234] btrfs_commit_transaction+0x32f/0xc00 [btrfs] [ 8948.261766] btrfs_set_free_space_cache_v1_active+0x38/0x60 [btrfs] [ 8948.262379] btrfs_start_pre_rw_mount+0x119/0x180 [btrfs] [ 8948.262909] open_ctree+0x1511/0x171e [btrfs] [ 8948.263359] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 8948.263863] legacy_get_tree+0x30/0x50 [ 8948.264242] vfs_get_tree+0x28/0xc0 [ 8948.264594] vfs_kern_mount.part.0+0x71/0xb0 [ 8948.265017] btrfs_mount+0x11d/0x3a0 [btrfs] [ 8948.265462] legacy_get_tree+0x30/0x50 [ 8948.265851] vfs_get_tree+0x28/0xc0 [ 8948.266203] path_mount+0x2d4/0xbe0 [ 8948.266554] __x64_sys_mount+0x103/0x140 [ 8948.266940] do_syscall_64+0x3b/0xc0 [ 8948.267300] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 8948.267790] -> #0 (sb_internal#2){.+.+}-{0:0}: [ 8948.268322] __lock_acquire+0x12e8/0x2260 [ 8948.268733] lock_acquire+0xd7/0x310 [ 8948.269092] start_transaction+0x44c/0x6e0 [btrfs] [ 8948.269591] find_free_extent+0x141e/0x1590 [btrfs] [ 8948.270087] btrfs_reserve_extent+0x14b/0x280 [btrfs] [ 8948.270588] cow_file_range+0x17e/0x490 [btrfs] [ 8948.271051] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs] [ 8948.271586] writepage_delalloc+0xb5/0x170 [btrfs] [ 8948.272071] __extent_writepage+0x156/0x3c0 [btrfs] [ 8948.272579] extent_write_cache_pages+0x263/0x460 [btrfs] [ 8948.273113] extent_writepages+0x76/0x130 [btrfs] [ 8948.273573] do_writepages+0xd2/0x1c0 [ 8948.273942] filemap_fdatawrite_wbc+0x68/0x90 [ 8948.274371] start_delalloc_inodes+0x17f/0x400 [btrfs] [ 8948.274876] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.275417] flush_space+0x1f2/0x630 [btrfs] [ 8948.275863] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [ 8948.276438] process_one_work+0x252/0x5a0 [ 8948.276829] worker_thread+0x55/0x3b0 [ 8948.277189] kthread+0xf2/0x120 [ 8948.277506] ret_from_fork+0x22/0x30 [ 8948.277868] other info that might help us debug this: [ 8948.278548] Chain exists of: sb_internal#2 --> &fs_info->delalloc_root_mutex --> &root->delalloc_mutex [ 8948.279601] Possible unsafe locking scenario: [ 8948.280102] CPU0 CPU1 [ 8948.280508] ---- ---- [ 8948.280915] lock(&root->delalloc_mutex); [ 8948.281271] lock(&fs_info->delalloc_root_mutex); [ 8948.281915] lock(&root->delalloc_mutex); [ 8948.282487] lock(sb_internal#2); [ 8948.282800] *** DEADLOCK *** [ 8948.283333] 4 locks held by kworker/u16:18/933570: [ 8948.283750] #0: ffff9b3dc00a9d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0 [ 8948.284609] #1: ffffa90349dafe70 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1d2/0x5a0 [ 8948.285637] #2: ffff9b3e14db5040 (&fs_info->delalloc_root_mutex){+.+.}-{3:3}, at: btrfs_start_delalloc_roots+0x97/0x2a0 [btrfs] [ 8948.286674] #3: ffff9b3e09c717d8 (&root->delalloc_mutex){+.+.}-{3:3}, at: start_delalloc_inodes+0x78/0x400 [btrfs] [ 8948.287596] stack backtrace: [ 8948.287975] CPU: 3 PID: 933570 Comm: kworker/u16:18 Not tainted 5.17.0-rc1-btrfs-next-111 #1 [ 8948.288677] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 8948.289649] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] [ 8948.290298] Call Trace: [ 8948.290517] <TASK> [ 8948.290700] dump_stack_lvl+0x59/0x73 [ 8948.291026] check_noncircular+0xf3/0x110 [ 8948.291375] ? start_transaction+0x228/0x6e0 [btrfs] [ 8948.291826] __lock_acquire+0x12e8/0x2260 [ 8948.292241] lock_acquire+0xd7/0x310 [ 8948.292714] ? find_free_extent+0x141e/0x1590 [btrfs] [ 8948.293241] ? lock_is_held_type+0xea/0x140 [ 8948.293601] start_transaction+0x44c/0x6e0 [btrfs] [ 8948.294055] ? find_free_extent+0x141e/0x1590 [btrfs] [ 8948.294518] find_free_extent+0x141e/0x1590 [btrfs] [ 8948.294957] ? _raw_spin_unlock+0x29/0x40 [ 8948.295312] ? btrfs_get_alloc_profile+0x124/0x290 [btrfs] [ 8948.295813] btrfs_reserve_extent+0x14b/0x280 [btrfs] [ 8948.296270] cow_file_range+0x17e/0x490 [btrfs] [ 8948.296691] btrfs_run_delalloc_range+0x345/0x7a0 [btrfs] [ 8948.297175] ? find_lock_delalloc_range+0x247/0x270 [btrfs] [ 8948.297678] writepage_delalloc+0xb5/0x170 [btrfs] [ 8948.298123] __extent_writepage+0x156/0x3c0 [btrfs] [ 8948.298570] extent_write_cache_pages+0x263/0x460 [btrfs] [ 8948.299061] extent_writepages+0x76/0x130 [btrfs] [ 8948.299495] do_writepages+0xd2/0x1c0 [ 8948.299817] ? sched_clock_cpu+0xd/0x110 [ 8948.300160] ? lock_release+0x155/0x4a0 [ 8948.300494] filemap_fdatawrite_wbc+0x68/0x90 [ 8948.300874] ? do_raw_spin_unlock+0x4b/0xa0 [ 8948.301243] start_delalloc_inodes+0x17f/0x400 [btrfs] [ 8948.301706] ? lock_release+0x155/0x4a0 [ 8948.302055] btrfs_start_delalloc_roots+0x194/0x2a0 [btrfs] [ 8948.302564] flush_space+0x1f2/0x630 [btrfs] [ 8948.302970] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs] [ 8948.303510] process_one_work+0x252/0x5a0 [ 8948.303860] ? process_one_work+0x5a0/0x5a0 [ 8948.304221] worker_thread+0x55/0x3b0 [ 8948.304543] ? process_one_work+0x5a0/0x5a0 [ 8948.304904] kthread+0xf2/0x120 [ 8948.305184] ? kthread_complete_and_exit+0x20/0x20 [ 8948.305598] ret_from_fork+0x22/0x30 [ 8948.305921] </TASK> It all comes from the fact that btrfs_start_delalloc_roots() takes the delalloc_root_mutex, in the transaction commit path we are holding a read lock on one of the superblock's freeze semaphores (via sb_start_intwrite()), the async reclaim task can also do a call to btrfs_start_delalloc_roots(), which ends up triggering writeback with calls to filemap_fdatawrite_wbc(), resulting in extent allocation which in turn can call btrfs_start_transaction(), which will result in taking the freeze semaphore via sb_start_intwrite(), forming a nasty dependency on all those locks which can be taken in different orders by different code paths. So just adopt the simple approach of calling try_to_writeback_inodes_sb() at btrfs_start_delalloc_flush(). Link: https://lore.kernel.org/linux-btrfs/20220130005258.GA7465@cuci.nl/ Link: https://lore.kernel.org/linux-btrfs/43acc426-d683-d1b6-729d-c6bc4a2fff4d@gmail.com/ Link: https://lore.kernel.org/linux-btrfs/6833930a-08d7-6fbc-0141-eb9cdfd6bb4d@gmail.com/ Link: https://lore.kernel.org/linux-btrfs/20190322041731.GF16651@hungrycats.org/ Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> [ add more link reports ] Signed-off-by: David Sterba <dsterba@suse.com>

Yonghong Song says: ==================== The patch [1] exposed a bpf_timer initialization bug in function check_and_init_map_value(). With bug fix here, the patch [1] can be applied with all selftests passed. Please see individual patches for fix details. [1] https://lore.kernel.org/bpf/20220209070324.1093182-2-memxor@gmail.com/ Changelog: v3 -> v4: . move header file in patch #1 to avoid bpf-next merge conflict v2 -> v3: . switch patch #1 and patch #2 for better bisecting v1 -> v2: . add Fixes tag for patch #1 . rebase against bpf tree ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>

As guest_irq is coming from KVM_IRQFD API call, it may trigger crash in svm_update_pi_irte() due to out-of-bounds: crash> bt PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8" #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51 torvalds#6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace [exception RIP: svm_update_pi_irte+227] RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086 RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001 RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8 RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200 R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 torvalds#7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm] torvalds#8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm] torvalds#9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm] RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020 RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0 R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0 R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0 ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b Vmx have been fix this in commit 3a8b067 (KVM: VMX: Do not BUG() on out-of-bounds guest IRQ), so we can just copy source from that to fix this. Co-developed-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Message-Id: <20220309113025.44469-1-wang.yi59@zte.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

There is possible circular locking dependency detected on event_mutex (see below logs). This is due to set fail safe mode is done at dp_panel_read_sink_caps() within event_mutex scope. To break this possible circular locking, this patch move setting fail safe mode out of event_mutex scope. [ 23.958078] ====================================================== [ 23.964430] WARNING: possible circular locking dependency detected [ 23.970777] 5.17.0-rc2-lockdep-00088-g05241de1f69e torvalds#148 Not tainted [ 23.977219] ------------------------------------------------------ [ 23.983570] DrmThread/1574 is trying to acquire lock: [ 23.988763] ffffff808423aab0 (&dp->event_mutex){+.+.}-{3:3}, at: msm_dp_displ ay_enable+0x58/0x164 [ 23.997895] [ 23.997895] but task is already holding lock: [ 24.003895] ffffff808420b280 (&kms->commit_lock[i]/1){+.+.}-{3:3}, at: lock_c rtcs+0x80/0x8c [ 24.012495] [ 24.012495] which lock already depends on the new lock. [ 24.012495] [ 24.020886] [ 24.020886] the existing dependency chain (in reverse order) is: [ 24.028570] [ 24.028570] -> #5 (&kms->commit_lock[i]/1){+.+.}-{3:3}: [ 24.035472] __mutex_lock+0xc8/0x384 [ 24.039695] mutex_lock_nested+0x54/0x74 [ 24.044272] lock_crtcs+0x80/0x8c [ 24.048222] msm_atomic_commit_tail+0x1e8/0x3d0 [ 24.053413] commit_tail+0x7c/0xfc [ 24.057452] drm_atomic_helper_commit+0x158/0x15c [ 24.062826] drm_atomic_commit+0x60/0x74 [ 24.067403] drm_mode_atomic_ioctl+0x6b0/0x908 [ 24.072508] drm_ioctl_kernel+0xe8/0x168 [ 24.077086] drm_ioctl+0x320/0x370 [ 24.081123] drm_compat_ioctl+0x40/0xdc [ 24.085602] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.090895] invoke_syscall+0x80/0x114 [ 24.095294] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.100668] do_el0_svc_compat+0x2c/0x54 [ 24.105242] el0_svc_compat+0x4c/0xe4 [ 24.109548] el0t_32_sync_handler+0xc4/0xf4 [ 24.114381] el0t_32_sync+0x178 [ 24.118688] [ 24.118688] -> #4 (&kms->commit_lock[i]){+.+.}-{3:3}: [ 24.125408] __mutex_lock+0xc8/0x384 [ 24.129628] mutex_lock_nested+0x54/0x74 [ 24.134204] lock_crtcs+0x80/0x8c [ 24.138155] msm_atomic_commit_tail+0x1e8/0x3d0 [ 24.143345] commit_tail+0x7c/0xfc [ 24.147382] drm_atomic_helper_commit+0x158/0x15c [ 24.152755] drm_atomic_commit+0x60/0x74 [ 24.157323] drm_atomic_helper_set_config+0x68/0x90 [ 24.162869] drm_mode_setcrtc+0x394/0x648 [ 24.167535] drm_ioctl_kernel+0xe8/0x168 [ 24.172102] drm_ioctl+0x320/0x370 [ 24.176135] drm_compat_ioctl+0x40/0xdc [ 24.180621] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.185904] invoke_syscall+0x80/0x114 [ 24.190302] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.195673] do_el0_svc_compat+0x2c/0x54 [ 24.200241] el0_svc_compat+0x4c/0xe4 [ 24.204544] el0t_32_sync_handler+0xc4/0xf4 [ 24.209378] el0t_32_sync+0x174/0x178 [ 24.213680] -> #3 (crtc_ww_class_mutex){+.+.}-{3:3}: [ 24.220308] __ww_mutex_lock.constprop.20+0xe8/0x878 [ 24.225951] ww_mutex_lock+0x60/0xd0 [ 24.230166] modeset_lock+0x190/0x19c [ 24.234467] drm_modeset_lock+0x34/0x54 [ 24.238953] drmm_mode_config_init+0x550/0x764 [ 24.244065] msm_drm_bind+0x170/0x59c [ 24.248374] try_to_bring_up_master+0x244/0x294 [ 24.253572] __component_add+0xf4/0x14c [ 24.258057] component_add+0x2c/0x38 [ 24.262273] dsi_dev_attach+0x2c/0x38 [ 24.266575] dsi_host_attach+0xc4/0x120 [ 24.271060] mipi_dsi_attach+0x34/0x48 [ 24.275456] devm_mipi_dsi_attach+0x28/0x68 [ 24.280298] ti_sn_bridge_probe+0x2b4/0x2dc [ 24.285137] auxiliary_bus_probe+0x78/0x90 [ 24.289893] really_probe+0x1e4/0x3d8 [ 24.294194] __driver_probe_device+0x14c/0x164 [ 24.299298] driver_probe_device+0x54/0xf8 [ 24.304043] __device_attach_driver+0xb4/0x118 [ 24.309145] bus_for_each_drv+0xb0/0xd4 [ 24.313628] __device_attach+0xcc/0x158 [ 24.318112] device_initial_probe+0x24/0x30 [ 24.322954] bus_probe_device+0x38/0x9c [ 24.327439] deferred_probe_work_func+0xd4/0xf0 [ 24.332628] process_one_work+0x2f0/0x498 [ 24.337289] process_scheduled_works+0x44/0x48 [ 24.342391] worker_thread+0x1e4/0x26c [ 24.346788] kthread+0xe4/0xf4 [ 24.350470] ret_from_fork+0x10/0x20 [ 24.354683] [ 24.354683] [ 24.354683] -> #2 (crtc_ww_class_acquire){+.+.}-{0:0}: [ 24.361489] drm_modeset_acquire_init+0xe4/0x138 [ 24.366777] drm_helper_probe_detect_ctx+0x44/0x114 [ 24.372327] check_connector_changed+0xbc/0x198 [ 24.377517] drm_helper_hpd_irq_event+0xcc/0x11c [ 24.382804] dsi_hpd_worker+0x24/0x30 [ 24.387104] process_one_work+0x2f0/0x498 [ 24.391762] worker_thread+0x1d0/0x26c [ 24.396158] kthread+0xe4/0xf4 [ 24.399840] ret_from_fork+0x10/0x20 [ 24.404053] [ 24.404053] -> #1 (&dev->mode_config.mutex){+.+.}-{3:3}: [ 24.411032] __mutex_lock+0xc8/0x384 [ 24.415247] mutex_lock_nested+0x54/0x74 [ 24.419819] dp_panel_read_sink_caps+0x23c/0x26c [ 24.425108] dp_display_process_hpd_high+0x34/0xd4 [ 24.430570] dp_display_usbpd_configure_cb+0x30/0x3c [ 24.436205] hpd_event_thread+0x2ac/0x550 [ 24.440864] kthread+0xe4/0xf4 [ 24.444544] ret_from_fork+0x10/0x20 [ 24.448757] [ 24.448757] -> #0 (&dp->event_mutex){+.+.}-{3:3}: [ 24.455116] __lock_acquire+0xe2c/0x10d8 [ 24.459690] lock_acquire+0x1ac/0x2d0 [ 24.463988] __mutex_lock+0xc8/0x384 [ 24.468201] mutex_lock_nested+0x54/0x74 [ 24.472773] msm_dp_display_enable+0x58/0x164 [ 24.477789] dp_bridge_enable+0x24/0x30 [ 24.482273] drm_atomic_bridge_chain_enable+0x78/0x9c [ 24.488006] drm_atomic_helper_commit_modeset_enables+0x1bc/0x244 [ 24.494801] msm_atomic_commit_tail+0x248/0x3d0 [ 24.499992] commit_tail+0x7c/0xfc [ 24.504031] drm_atomic_helper_commit+0x158/0x15c [ 24.509404] drm_atomic_commit+0x60/0x74 [ 24.513976] drm_mode_atomic_ioctl+0x6b0/0x908 [ 24.519079] drm_ioctl_kernel+0xe8/0x168 [ 24.523650] drm_ioctl+0x320/0x370 [ 24.527689] drm_compat_ioctl+0x40/0xdc [ 24.532175] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.537463] invoke_syscall+0x80/0x114 [ 24.541861] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.547235] do_el0_svc_compat+0x2c/0x54 [ 24.551806] el0_svc_compat+0x4c/0xe4 [ 24.556106] el0t_32_sync_handler+0xc4/0xf4 [ 24.560948] el0t_32_sync+0x174/0x178 Changes in v2: -- add circular lockiing trace Fixes: d4aca42 ("drm/msm/dp: always add fail-safe mode into connector mode list") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/481396/ Link: https://lore.kernel.org/r/1649451894-554-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>

The root cause is the race as follows: Thread #1 Thread #2(irq ctx) z_erofs_runqueue() struct z_erofs_decompressqueue io_A[]; submit bio A z_erofs_decompress_kickoff(,,1) z_erofs_decompressqueue_endio(bio A) z_erofs_decompress_kickoff(,,-1) spin_lock_irqsave() atomic_add_return() io_wait_event() -> pending_bios is already 0 [end of function] wake_up_locked(io_A[]) // crash Referenced backtrace in kernel 5.4: [ 10.129422] Unable to handle kernel paging request at virtual address eb0454a4 [ 10.364157] CPU: 0 PID: 709 Comm: getprop Tainted: G WC O 5.4.147-ab09225 #1 [ 11.556325] [<c01b33b8>] (__wake_up_common) from [<c01b3300>] (__wake_up_locked+0x40/0x48) [ 11.565487] [<c01b3300>] (__wake_up_locked) from [<c044c8d0>] (z_erofs_vle_unzip_kickoff+0x6c/0xc0) [ 11.575438] [<c044c8d0>] (z_erofs_vle_unzip_kickoff) from [<c044c854>] (z_erofs_vle_read_endio+0x16c/0x17c) [ 11.586082] [<c044c854>] (z_erofs_vle_read_endio) from [<c06a80e8>] (clone_endio+0xb4/0x1d0) [ 11.595428] [<c06a80e8>] (clone_endio) from [<c04a1280>] (blk_update_request+0x150/0x4dc) [ 11.604516] [<c04a1280>] (blk_update_request) from [<c06dea28>] (mmc_blk_cqe_complete_rq+0x144/0x15c) [ 11.614640] [<c06dea28>] (mmc_blk_cqe_complete_rq) from [<c04a5d90>] (blk_done_softirq+0xb0/0xcc) [ 11.624419] [<c04a5d90>] (blk_done_softirq) from [<c010242c>] (__do_softirq+0x184/0x56c) [ 11.633419] [<c010242c>] (__do_softirq) from [<c01051e8>] (irq_exit+0xd4/0x138) [ 11.641640] [<c01051e8>] (irq_exit) from [<c010c314>] (__handle_domain_irq+0x94/0xd0) [ 11.650381] [<c010c314>] (__handle_domain_irq) from [<c04fde70>] (gic_handle_irq+0x50/0xd4) [ 11.659641] [<c04fde70>] (gic_handle_irq) from [<c0101b70>] (__irq_svc+0x70/0xb0) Signed-off-by: Hongyu Jin <hongyu.jin@unisoc.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20220401115527.4935-1-hongyu.jin.cn@gmail.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>

into HEAD KVM/riscv fixes for 5.18, take #2 - Remove 's' & 'u' as valid ISA extension - Do not allow disabling the base extensions 'i'/'m'/'a'/'c'

Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an in-kernel local APIC and APICv enabled at the module level. Consuming kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens before the vCPU is fully onlined, i.e. it won't get the request made to "all" vCPUs. If APICv is globally inhibited between setting apicv_active and onlining the vCPU, the vCPU will end up running with APICv enabled and trigger KVM's sanity check. Mark APICv as active during vCPU creation if APICv is enabled at the module level, both to be optimistic about it's final state, e.g. to avoid additional VMWRITEs on VMX, and because there are likely bugs lurking since KVM checks apicv_active in multiple vCPU creation paths. While keeping the current behavior of consuming kvm_apicv_activated() is arguably safer from a regression perspective, force apicv_active so that vCPU creation runs with deterministic state and so that if there are bugs, they are found sooner than later, i.e. not when some crazy race condition is hit. WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877 Modules linked in: CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014 RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877 Call Trace: <TASK> vcpu_run arch/x86/kvm/x86.c:10039 [inline] kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234 kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a call to KVM_SET_GUEST_DEBUG. r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async) r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async) r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002) ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5}) ioctl$KVM_RUN(r2, 0xae80, 0x0) Reported-by: Gaoning Pan <pgn@zju.edu.cn> Reported-by: Yongkang Jia <kangel@zju.edu.cn> Fixes: 8df14af ("kvm: x86: Add support for dynamic APICv activation") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220420013732.3308816-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] torvalds#6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] torvalds#7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc torvalds#8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 torvalds#9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When shmem_reconfigure() calls __percpu_counter_compare(), the second parameter is unsigned long long. But in the definition of __percpu_counter_compare(), the second parameter is s64. So when __percpu_counter_compare() executes abs(count - rhs), UBSAN shows the following warning: ================================================================================ UBSAN: Undefined behaviour in lib/percpu_counter.c:209:6 signed integer overflow: 0 - -9223372036854775808 cannot be represented in type 'long long int' CPU: 1 PID: 9636 Comm: syz-executor.2 Tainted: G ---------r- - 4.18.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack home/install/linux-rh-3-10/lib/dump_stack.c:77 [inline] dump_stack+0x125/0x1ae home/install/linux-rh-3-10/lib/dump_stack.c:117 ubsan_epilogue+0xe/0x81 home/install/linux-rh-3-10/lib/ubsan.c:159 handle_overflow+0x19d/0x1ec home/install/linux-rh-3-10/lib/ubsan.c:190 __percpu_counter_compare+0x124/0x140 home/install/linux-rh-3-10/lib/percpu_counter.c:209 percpu_counter_compare home/install/linux-rh-3-10/./include/linux/percpu_counter.h:50 [inline] shmem_remount_fs+0x1ce/0x6b0 home/install/linux-rh-3-10/mm/shmem.c:3530 do_remount_sb+0x11b/0x530 home/install/linux-rh-3-10/fs/super.c:888 do_remount home/install/linux-rh-3-10/fs/namespace.c:2344 [inline] do_mount+0xf8d/0x26b0 home/install/linux-rh-3-10/fs/namespace.c:2844 ksys_mount+0xad/0x120 home/install/linux-rh-3-10/fs/namespace.c:3075 __do_sys_mount home/install/linux-rh-3-10/fs/namespace.c:3089 [inline] __se_sys_mount home/install/linux-rh-3-10/fs/namespace.c:3086 [inline] __x64_sys_mount+0xbf/0x160 home/install/linux-rh-3-10/fs/namespace.c:3086 do_syscall_64+0xca/0x5c0 home/install/linux-rh-3-10/arch/x86/entry/common.c:298 entry_SYSCALL_64_after_hwframe+0x6a/0xdf RIP: 0033:0x46b5e9 Code: 5d db fa ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b db fa ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f54d5f22c68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 000000000077bf60 RCX: 000000000046b5e9 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000000 RBP: 000000000077bf60 R08: 0000000020000140 R09: 0000000000000000 R10: 00000000026740a4 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd1fb1592f R14: 00007f54d5f239c0 R15: 000000000077bf6c ================================================================================ [akpm@linux-foundation.org: tweak error message text] Link: https://lkml.kernel.org/r/20220513025225.2678727-1-luomeng12@huawei.com Signed-off-by: Luo Meng <luomeng12@huawei.com> Cc: Hugh Dickins <hughd@google.com> Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The splat below can be seen when running kvm-unit-test: ============================= WARNING: suspicious RCU usage 5.18.0-rc7 #5 Tainted: G IOE ----------------------------- /home/kernel/linux/arch/x86/kvm/../../../virt/kvm/eventfd.c:80 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by qemu-system-x86/35124: #0: ffff9725391d80b8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x710 [kvm] #1: ffffbd25cfb2a0b8 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0xdeb/0x1900 [kvm] #2: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: kvm_hv_notify_acked_sint+0x79/0x1e0 [kvm] #3: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: irqfd_resampler_ack+0x5/0x110 [kvm] stack backtrace: CPU: 2 PID: 35124 Comm: qemu-system-x86 Tainted: G IOE 5.18.0-rc7 #5 Call Trace: <TASK> dump_stack_lvl+0x6c/0x9b irqfd_resampler_ack+0xfd/0x110 [kvm] kvm_notify_acked_gsi+0x32/0x90 [kvm] kvm_hv_notify_acked_sint+0xc5/0x1e0 [kvm] kvm_hv_set_msr_common+0xec1/0x1160 [kvm] kvm_set_msr_common+0x7c3/0xf60 [kvm] vmx_set_msr+0x394/0x1240 [kvm_intel] kvm_set_msr_ignored_check+0x86/0x200 [kvm] kvm_emulate_wrmsr+0x4f/0x1f0 [kvm] vmx_handle_exit+0x6fb/0x7e0 [kvm_intel] vcpu_enter_guest+0xe5a/0x1900 [kvm] kvm_arch_vcpu_ioctl_run+0x16e/0xac0 [kvm] kvm_vcpu_ioctl+0x279/0x710 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae resampler-list is protected by irq_srcu (see kvm_irqfd_assign), so fix the false positive by using list_for_each_entry_srcu(). Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1652950153-12489-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

There's a locking issue with the per-netns list of calls in rxrpc. The pieces of code that add and remove a call from the list use write_lock() and the calls procfile uses read_lock() to access it. However, the timer callback function may trigger a removal by trying to queue a call for processing and finding that it's already queued - at which point it has a spare refcount that it has to do something with. Unfortunately, if it puts the call and this reduces the refcount to 0, the call will be removed from the list. Unfortunately, since the _bh variants of the locking functions aren't used, this can deadlock. ================================ WARNING: inconsistent lock state 5.18.0-rc3-build4+ torvalds#10 Not tainted -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. ksoftirqd/2/25 [HC0[0]:SC1[1]:HE1:SE0] takes: ffff888107ac4038 (&rxnet->call_lock){+.?.}-{2:2}, at: rxrpc_put_call+0x103/0x14b {SOFTIRQ-ON-W} state was registered at: ... Possible unsafe locking scenario: CPU0 ---- lock(&rxnet->call_lock); <Interrupt> lock(&rxnet->call_lock); *** DEADLOCK *** 1 lock held by ksoftirqd/2/25: #0: ffff8881008ffdb0 ((&call->timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x23d Changes ======= ver #2) - Changed to using list_next_rcu() rather than rcu_dereference() directly. Fixes: 17926a7 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>

When user_dlm_destroy_lock failed, it didn't clean up the flags it set before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of lock is still in used, next time when unlink invokes this function, it will return succeed, and then unlink will remove inode and dentry if lock is not in used(file closed), but the dlm lock is still linked in dlm lock resource, then when bast come in, it will trigger a panic due to user-after-free. See the following panic call trace. To fix this, USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink fail. For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN, USER_LOCK_BUSY is also required to be cleared. Even though spin lock is released in between, but USER_LOCK_IN_TEARDOWN is still set, for USER_LOCK_BUSY, if before every place that waits on this flag, USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow waits on the busy flag set by user_dlm_destroy_lock(), then we can simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix user_dlm_cluster_lock() which is the only function not following this. [ 941.336392] (python,26174,16):dlmfs_unlink:562 ERROR: unlink 004fb0000060000b5a90b8c847b72e1, error -16 from destroy [ 989.757536] ------------[ cut here ]------------ [ 989.757709] kernel BUG at fs/ocfs2/dlmfs/userdlm.c:173! [ 989.757876] invalid opcode: 0000 [#1] SMP [ 989.758027] Modules linked in: ksplice_2zhuk2jr_ib_ipoib_new(O) ksplice_2zhuk2jr(O) mptctl mptbase xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn cdc_ether usbnet mii ocfs2 jbd2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfsv3 nfs_acl nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc scsi_transport_fc sunrpc ipmi_devintf bridge stp llc rds_rdma rds bonding ib_sdp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm falcon_lsm_serviceable(PE) falcon_nf_netcontain(PE) mlx4_vnic falcon_kal(E) falcon_lsm_pinned_13402(E) mlx4_ib ib_sa ib_mad ib_core ib_addr xenfs xen_privcmd dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 lpc_ich mfd_core ipmi_ssif i2c_core ipmi_si ipmi_msghandler [ 989.760686] ioatdma sg ext3 jbd mbcache sd_mod ahci libahci ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel megaraid_sas mlx4_core crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ksplice_2zhuk2jr_ib_ipoib_old] [ 989.761987] CPU: 10 PID: 19102 Comm: dlm_thread Tainted: P OE 4.1.12-124.57.1.el6uek.x86_64 #2 [ 989.762290] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30350100 06/17/2021 [ 989.762599] task: ffff880178af6200 ti: ffff88017f7c8000 task.ti: ffff88017f7c8000 [ 989.762848] RIP: e030:[<ffffffffc07d4316>] [<ffffffffc07d4316>] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.763185] RSP: e02b:ffff88017f7cbcb8 EFLAGS: 00010246 [ 989.763353] RAX: 0000000000000000 RBX: ffff880174d48008 RCX: 0000000000000003 [ 989.763565] RDX: 0000000000120012 RSI: 0000000000000003 RDI: ffff880174d48170 [ 989.763778] RBP: ffff88017f7cbcc8 R08: ffff88021f4293b0 R09: 0000000000000000 [ 989.763991] R10: ffff880179c8c000 R11: 0000000000000003 R12: ffff880174d48008 [ 989.764204] R13: 0000000000000003 R14: ffff880179c8c000 R15: ffff88021db7a000 [ 989.764422] FS: 0000000000000000(0000) GS:ffff880247480000(0000) knlGS:ffff880247480000 [ 989.764685] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 989.764865] CR2: ffff8000007f6800 CR3: 0000000001ae0000 CR4: 0000000000042660 [ 989.765081] Stack: [ 989.765167] 0000000000000003 ffff880174d48040 ffff88017f7cbd18 ffffffffc07d455f [ 989.765442] ffff88017f7cbd88 ffffffff816fb639 ffff88017f7cbd38 ffff8800361b5600 [ 989.765717] ffff88021db7a000 ffff88021f429380 0000000000000003 ffffffffc0453020 [ 989.765991] Call Trace: [ 989.766093] [<ffffffffc07d455f>] user_bast+0x5f/0xf0 [ocfs2_dlmfs] [ 989.766287] [<ffffffff816fb639>] ? schedule_timeout+0x169/0x2d0 [ 989.766475] [<ffffffffc0453020>] ? o2dlm_lock_ast_wrapper+0x20/0x20 [ocfs2_stack_o2cb] [ 989.766738] [<ffffffffc045303a>] o2dlm_blocking_ast_wrapper+0x1a/0x20 [ocfs2_stack_o2cb] [ 989.767010] [<ffffffffc0864ec6>] dlm_do_local_bast+0x46/0xe0 [ocfs2_dlm] [ 989.767217] [<ffffffffc084f5cc>] ? dlm_lockres_calc_usage+0x4c/0x60 [ocfs2_dlm] [ 989.767466] [<ffffffffc08501f1>] dlm_thread+0xa31/0x1140 [ocfs2_dlm] [ 989.767662] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.767834] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.768006] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.768178] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.768349] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.768521] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.768693] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.768893] [<ffffffff816f78ce>] ? __schedule+0x23e/0x810 [ 989.769067] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.769241] [<ffffffff810ce4d0>] ? wait_woken+0x90/0x90 [ 989.769411] [<ffffffffc084f7c0>] ? dlm_kick_thread+0x80/0x80 [ocfs2_dlm] [ 989.769617] [<ffffffff810a8bbb>] kthread+0xcb/0xf0 [ 989.769774] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.769945] [<ffffffff816f78da>] ? __schedule+0x24a/0x810 [ 989.770117] [<ffffffff810a8af0>] ? kthread_create_on_node+0x180/0x180 [ 989.770321] [<ffffffff816fdaa1>] ret_from_fork+0x61/0x90 [ 989.770492] [<ffffffff810a8af0>] ? kthread_create_on_node+0x180/0x180 [ 989.770689] Code: d0 00 00 00 f0 45 7d c0 bf 00 20 00 00 48 89 83 c0 00 00 00 48 89 83 c8 00 00 00 e8 55 c1 8c c0 83 4b 04 10 48 83 c4 08 5b 5d c3 <0f> 0b 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 83 [ 989.771892] RIP [<ffffffffc07d4316>] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.772174] RSP <ffff88017f7cbcb8> [ 989.772704] ---[ end trace ebd1e38cebcc93a8 ]--- [ 989.772907] Kernel panic - not syncing: Fatal exception [ 989.773173] Kernel Offset: disabled Link: https://lkml.kernel.org/r/20220518235224.87100-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Martin Fernandez added 5 commits October 25, 2021 19:49

Extend pg_data_t to hold information about memory encryption

8fe7029

Add a new member in the pg_data_t struct tell whether the node corresponding to that pg_data_t is able to do hardware memory encryption. Signed-off-by: Martin Fernandez <martin.fernandez@eclypsium.com>

Extend e820_table to hold information about memory encryption

952654e

Add a new member in e820_entry to hold whether an entry is able to do hardware memory encryption or not. Signed-off-by: Martin Fernandez <martin.fernandez@eclypsium.com>

hughsie reviewed Oct 27, 2021

View reviewed changes

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Efi mem crypto v2 #2

Efi mem crypto v2 #2

mefff commented Oct 26, 2021

hughsie Oct 27, 2021

mefff Oct 27, 2021

hughsie Oct 27, 2021

mefff Oct 27, 2021

hughsie Oct 27, 2021

mefff Oct 27, 2021

Efi mem crypto v2 #2

Are you sure you want to change the base?

Efi mem crypto v2 #2

Conversation

mefff commented Oct 26, 2021

hughsie Oct 27, 2021

Choose a reason for hiding this comment

mefff Oct 27, 2021

Choose a reason for hiding this comment

hughsie Oct 27, 2021

Choose a reason for hiding this comment

mefff Oct 27, 2021

Choose a reason for hiding this comment

hughsie Oct 27, 2021

Choose a reason for hiding this comment

mefff Oct 27, 2021

Choose a reason for hiding this comment