The NanoUtils are a series of small unility / breakout PCBs created by Mats Engstrom @ SmallRoomLabs. All these boards are licensed as CC BY-SA
The following PCBs are currently a part of NanoUtils:
###NU-Xtal
A small breakout-style board with a crystal, caps and a resistor on it. This board is suitable for easy add a crystal to an Atmel ATmega or many Microchip PIC-series microcontrollers like the PIC18F2550 having a GND pin next to the two XTAL pins.
###NU-Sockisop
A 5x5 cm combo breakout board with different breakouts on front and backsides.
- Front:
- 4 x SOIC-16
- 4 x SOIC-8
- 4 x SOT23-6
- Back:
- 4 x TSSOP-16
- 4 x TSSOP-8
- 4 x SOT-23 (dual)
###NU-Fithole
A small keyfob-like tool for checking the dimension of component leads.
###NU-ThruXtal
A small breakout-style board with a crystal, caps and a resistor on it. This board is suitable for easy add a crystal to an Atmel ATmega or many Microchip PIC-series microcontrollers like the PIC18F2550 having a GND pin next to the two XTAL pins. This is a variant of the NU-Xtal board supporting HC-49 crystals in both SMD and thru hole. The load caps can be fitted with either SMD or thru hole caps in two sizes.
###NU-Oledy
Breakout boards for experimenting with OLED displays. The board have 32 pads in 0.5, 0.6, 0.62, 0.65, 0.7, 0.8, 0.845 and 1.0 mm pitches.