Skip to content

Latest commit

 

History

History
344 lines (237 loc) · 10.6 KB

CHANGELOG.md

File metadata and controls

344 lines (237 loc) · 10.6 KB
Raw

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

[Unreleased]

[1.5.9] - 2022-06-01

Added

  • Added support for dmaker.fan.p220 (Mijia DC Inverter Circulating Floor Fan) fan
  • Added missing devices to README

Fixed

  • Fix dmaker.fan.p30 support

[1.5.8] - 2022-05-30

Added

  • Added support for dmaker.fan.p30 (Xiaomi Smart Standing Fan 2) fan
  • Added support for dmaker.fan.p33 (Xiaomi Smart Standing Fan 2 Pro) fan
  • Added some extra logging output

[1.5.7] - 2021-08-03

Added

  • Added support for the air.fan.ca23ad9 (AIRMATE CA23-AD9 Air Circulation Fan) fan

[1.5.6] - 2021-07-27

Fixed

  • Fix characteristic warnings

[1.5.5] - 2021-07-13

Added

  • Added support for the dmaker.fan.p18 (Mi Smart Fan 2) fan

[1.5.4] - 2021-07-11

Fixed

  • Fix an issue where the fan woudl report no response in some cases

Changed

  • Adjusted the dmaker.fan.p5 angle range to 0-140

[1.5.3] - 2021-06-18

Fixed

  • Fix more characteristic warnings

Changed

  • The generated accessory uuid will now be more unique, this might cause existing accessories to reset

[1.5.2] - 2021-06-17

Fixed

  • Fix characteristic warnings

[1.5.1] - 2021-06-08

Fixed

  • Fix an error which might appear when syncing fan properties

[1.5.0] - 2021-05-20

Added

  • Added support for the zhimi.fan.fb1 (Mi Smart Air Circulator Fan) fan
  • New verticalAngleButtons property
  • Added a reference to a tool in the readme for easy token retrieval

Changed

  • Improved the naming of services to make them more readable (no need to repeat the fan name on each service)

[1.4.8] - 2021-03-13

Fixed

  • Fixed homebridge warning after recent update

[1.4.7] - 2020-12-28

Added

  • Added support for the zhimi.fan.fa1 (Mijia DC Circulating Fan)
  • New capabilities
  • Show Up/Down move control when the fan supports it

[1.4.6] - 2020-12-07

Added

  • Added support for the dmaker.fan.p8 (Mi Smart Standing Fan 1C CN)

Fixed

  • Fixed step less fan speed control on the Mi Smart Standing Fan Pro

[1.4.5] - 2020-12-07

Changed

  • Remove the fan speed capability from dmaker.fan.p11 and dmaker.fan.p15 as it is not clear yet how to control it on those fan models

[1.4.4] - 2020-12-06

Added

  • Added support for the dmaker.fan.p11 (Mi Smart Standing Fan Pro)
  • Added support for the dmaker.fan.p15 (Mi Smart Standing Fan Pro EU)

[1.4.3] - 2020-10-07

Fixed

  • Fixed a bug where disabling the predefined angleButtons would not have any effect

Changed

  • The angleButtons state will now be disabled when the fan is turned off
  • Updated README to clarify a property more

[1.4.2] - 2020-10-04

Added

  • new deepDebugLog property which enables more detailed debug log
  • some under the hood improvements

Fixed

  • Fixed config.schema.json

Removed

  • Removed the battery reporting capability from Smartmi Fan 3 as it seems that it is not supported by the fan

[1.4.1] - 2020-10-03

Fixed

  • Fixed a bug where the plugin would not have a stable connection to miot devices
  • Fixed config.schema.json

[1.4.0] - 2020-10-02

This update brings a lot of new changes and improvements. After the update the fan will be re-added to your Home app. New devices will now appear in the Home app automatically after the first connection has been established since the plugin needs to identify the fan model in order to create a device specific fan accessory. That means no new accessory will appear in HomeKit until the first successful connection. If you know your fan model then you can specify that in the config.json to speed up the discovery.

Added

  • Automatic device detection and device specific accessories
  • On supported devices temperature and humidity will now be shown
  • On supported devices the battery level will now be shown
  • "No response" will now be shown on the fan accessory if the fan is not connected
  • Show correct status of switches when the fan is not connected (switches got stuck at the last known status before)
  • Miio devices now support fan levels
  • dmaker.fan.p9 now supports sleep mode control
  • If a fan supports led brightness (0% to 100%) then show a lightbulb
  • New model property which allows to specify the fan model for faster accessory creation
  • New sleepModeControl property which allows to enable/disable the sleep mode. Only on supported devices!
  • New ioniserControl property which allows to quickly enable/disable the ioniser on your fan. Only on supported devices!
  • New fanLevelControl property which when enabled will show predefined buttons to easily switch fan levels. Only on supported devices!

Fixed

  • Reduced the number of commands send to the fan when setting rotation speed using the speed slider
  • Fixed a bug where it was not possible to set rotation speed and control natural mode at the same time in scenes

Changed

  • The plugin now works as a dynamic platform which means that there is no need to manually add devices to HomeKit anymore
  • Only supported services by the fan will now appear on fan accessories and enabling services in the config.json will only have effect when the fan supports it
  • Renamed naturalModeButton property to naturalModeControl to be consistent with other properties (breaking change for some users)
  • Check if angle buttons are within the supported range by the fan
  • Reorganized project structure
  • Fixed some typos in the README

Removed

  • Removed the possibility to setup the plugin as an accessory (breaking change for some users)

[1.3.1] - 2020-07-30

Added

  • Added support for zhimi.fan.v2 and zhimi.fan.v3 (Smartmi DC Pedestal Fan) fans

Fixed

  • Fixed a bug with the miot protocol which prevented property polling

Changed

  • Updated README

[1.3.0] - 2020-07-29

Added

  • You can now configure this plugin to run as a platform
  • Added a fan device factory to detect which fan is used
  • Added support for the dmaker.fan.p9 fan (Mijia Tower Fan)
  • Added support for the dmaker.fan.p10 fan (Mijia 2-in-1 DC Inverter Fan 2)
  • Added support for the zhimi.fan.za5 fan (Smartmi Standing Fan 3)
  • Added generic miot fan
  • Added fan capabilities to easily distinguish what features fan models support

Changed

  • Platform is now also the preferred way to use the plugin, when still using as an accessory a warning will be shown.
  • Optimized miot protocol
  • Optimized code
  • Reorganized project structure
  • Updated README

Note: All users should switch to use the plugin as a platform since the accessory way will be removed soon. In order to switch to platform you just simply need to adjust your config.json as the example in the README.

[1.2.1] - 2020-07-26

Changed

  • Fixed dmaker.fan.p5 support

[1.2.0] - 2020-07-26

Added

  • Added support for the dmaker.fan.1c
  • Other new xiaomi fans should also now have initial support
  • New miotFan device class which adds initial support for xiaomi miot protocol fans
  • New optional deviceId configuration field

Changed

  • Optimized code to easily implement new xiaomi miot fans
  • Improved log
  • Updated README

Note: The dmaker.fan.1c does not support moveControl (move left/right) and angleButtons. Since moveControl is automatically enabled this needs to be currently manually disabled in the config.json. Just set moveControl to false if you are using this device.

[1.1.4] - 2020-07-15

Changed

  • Improved log
  • Updated README

[1.1.3] - 2020-07-13

Added

  • Smartmi fans will now log the total use time in minutes when connected to the device

Changed

  • Added back the rotation direction service, the switch can now be used on Smartmi fans to switch between buzzer sound level (loud or quiet)
  • Updated README

[1.1.2] - 2020-07-12

Changed

  • Updated README
  • Updated config.schema.json

[1.1.1] - 2020-07-12

Changed

  • the naturalModeButton configuration field has now a default value of true

Removed

  • Removed the rotation service which was used to toggle between fan modes, now replaced by a dedicated switch

[1.1.0] - 2020-07-12

Changed

  • Renamed modeButtons configuration field to naturalModeButton
  • the new naturalModeButton configuration field now creates just one switch which enables/disabled the natural mode
  • fixed the status of the rotation direction button(natural mode)
  • turning off an active angle button will now disable oscillation
  • turning on an angle button will now enable oscillation

[1.0.2] - 2020-07-08

Changed

  • Fixed a possible crash

[1.0.1] - 2020-07-08

Added

  • Added missing move control to dmaker fans which was by mistake removed with version 1.0.0

Changed

  • Updated README
  • moveControl configuration field has now back a default value of true

[1.0.0] - 2020-07-06

Added

  • Huge update update!
  • New modeButtons configuration field, which allows to show additional fan mode switch buttons
  • New shutdownTimer configuration field, which allows to enable a slider which can be used to set a shutdown timer
  • New angleButtons configuration field, which allows to create buttons that can be used to switch between oscillation angles
  • Home automations should now work
  • Adding new devices should not be more easier

Changed

  • The plugin was completely rewritten which should result in better status detection and more reliable controls.
  • moveControl configuration field has now a default value of false
  • Better logging
  • Fan status is now not dependant on a successful ping anymore
  • Updated README

Removed

  • Removed unused dependencies
  • Removed unnecessary checks

[0.9.5] - 2020-06-29

Changed

  • Reset fan status after connection loss. When the fan was turned off manually then the Home fan status got stuck on the last reported state by the fan.

[0.9.4] - 2020-06-28

Changed

  • Changed default preferences directory

Removed

  • Removed unused dependency

[0.9.3] - 2020-06-28

Added

  • Added missing dmaker.fan.p5 properties

Changed

  • Optimized code

[0.9.2] - 2020-06-25

Added

  • Initial dmaker fan support

Changed

  • Fixed some typos
  • Optimized error handling

[0.9.1] - 2020-06-19

Fixed

  • Fixed a bug which might have caused a crash in some cases

[0.9.0] - 2020-06-14

Added

  • Better device status retrieval. Requesting the device status should not longer make other accessories unresponsive.

Changed

  • Fixed a bug which might have caused a crash when setting the speed level

[0.8.1] - 2019-08-13

Fixed

  • Fixed a bug where optional switches could not be disabled

[0.8.0] - 2019-08-04

Initial release