[Bug]: [RadioIf] SX126x standby failed with error -707 #2208

Andrey-VD · 2023-01-26T11:18:52Z

Hardware

DIY

Firmware Version

2.0.12.2400dd4-d

Description

reboot after almost every message sent or received.
Module E22400M30S

Connected to radio
iceTelemetryModule] txGood=0,rxGood=0,rxBad=0

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using channel 0 (hash 0x8)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Expanding short PSK #1

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using AES128 key!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] ESP32 crypt fr=84de2c0c, num=7416aa1f, numBytes=11!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] decoded message (id=0x7416aa1f fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

### DEBUG | ??:??:?? 12 [RadioIf] SX126x standby failed with error -707

assert failed: void SX126xInterface::setStandby() [with T = SX1268] SX126xInterface.cpp:175 (err == RADIOLIB_ERR_NONE)

Backtrace: 0x4008448d:0x3ffd8540 0x400966a1:0x3ffd8560 0x4009c821:0x3ffd8580 0x400e053b:0x3ffd86b0 0x400dfaf8:0x3ffd86d0 0x400e4335:0x3ffd86f0 0x400e4394:0x3ffd8710 0x4020fd42:0x3ffd8730 0x400d5685:0x3ffd8750 0x400d573a:0x3ffd8770 0x400fb2fd:0x3ffd8790 0x400de3cd:0x3ffd87c0 0x4012f329:0x3ffd87e0

ELF file SHA256: a3d62f1cb6fab2f1

E (18444) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0

Relevant log output

Connected to radio
iceTelemetryModule] txGood=0,rxGood=0,rxBad=0

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using channel 0 (hash 0x8)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Expanding short PSK #1

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using AES128 key!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] ESP32 crypt fr=84de2c0c, num=7416aa1f, numBytes=11!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] decoded message (id=0x7416aa1f fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

DEBUG | ??:??:?? 12 [RadioIf] SX126x standby failed with error -707



assert failed: void SX126xInterface<T>::setStandby() [with T = SX1268] SX126xInterface.cpp:175 (err == RADIOLIB_ERR_NONE)





Backtrace: 0x4008448d:0x3ffd8540 0x400966a1:0x3ffd8560 0x4009c821:0x3ffd8580 0x400e053b:0x3ffd86b0 0x400dfaf8:0x3ffd86d0 0x400e4335:0x3ffd86f0 0x400e4394:0x3ffd8710 0x4020fd42:0x3ffd8730 0x400d5685:0x3ffd8750 0x400d573a:0x3ffd8770 0x400fb2fd:0x3ffd8790 0x400de3cd:0x3ffd87c0 0x4012f329:0x3ffd87e0









ELF file SHA256: a3d62f1cb6fab2f1



E (18444) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0

Rebooting...

ets Jul 29 2019 12:21:46



rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)

configsip: 0, SPIWP:0xee

clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00

mode:DIO, clock div:2

load:0x3fff0030,len:1184

load:0x40078000,len:13104

load:0x40080400,len:3036

entry 0x400805e4

E (791) esp_core_dump_flash: No core dump ?f????????found!

E (791) esp_core_dump_flash: No core dump partition found!

[    12][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz

INFO  | ??:??:?? 0 



//\ E S H T /\ S T / C



INFO  | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset

DEBUG | ??:??:?? 0 Filesystem files (589824/1048576 Bytes):

DEBUG | ??:??:?? 0  /prefs/channels.proto (53 Bytes)

DEBUG | ??:??:?? 0  /prefs/db.proto (144 Bytes)

DEBUG | ??:??:?? 0  /static/.gitkeep (0 Bytes)

DEBUG | ??:??:?? 0  /static/Logo_Black.svg.gz (592 Bytes)

DEBUG | ??:??:?? 0  /static/Logo_White.svg.gz (600 Bytes)

DEBUG | ??:??:?? 0  /static/apple-touch-icon.png.gz (4300 Bytes)

DEBUG | ??:??:?? 0  /static/favicon.ico.gz (2221 Bytes)

DEBUG | ??:??:?? 0  /static/icon.svg.gz (842 Bytes)

DEBUG | ??:??:?? 0  /static/index-3ad6b632.css.gz (14921 Bytes)

DEBUG | ??:??:?? 0  /static/index-7d0857aa.js.gz (347 Bytes)

DEBUG | ??:??:?? 0  /static/index-84fcdb37.js.gz (507158 Bytes)

DEBUG | ??:??:?? 0  /static/index.html.gz (547 Bytes)

DEBUG | ??:??:?? 0  /static/robots.txt.gz (42 Bytes)

DEBUG | ??:??:?? 0  /static/site.webmanifest.gz (196 Bytes)

[   399][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000

DEBUG | ??:??:?? 0 Using analog input 35 for battery level

INFO  | ??:??:?? 0 No I2C devices found

INFO  | ??:??:?? 0 Meshtastic hwvendor=39, swver=2.0.12.2400dd4-d

DEBUG | ??:??:?? 0 Setting random seed 688293796

DEBUG | ??:??:?? 0 Total heap: 191304

DEBUG | ??:??:?? 0 Free heap: 157004

DEBUG | ??:??:?? 0 Total PSRAM: 0

DEBUG | ??:??:?? 0 Free PSRAM: 0

DEBUG | ??:??:?? 0 NVS: UsedEntries 70, FreeEntries 560, AllEntries 630, NameSpaces 3

DEBUG | ??:??:?? 0 Setup Preferences in Flash Storage

DEBUG | ??:??:?? 0 Number of Device Reboots: 52

DEBUG | ??:??:?? 0 OTA firmware version 0.2.0.1da2617

INFO  | ??:??:?? 0 Initializing NodeDB

INFO  | ??:??:?? 0 Loading /prefs/db.proto

INFO  | ??:??:?? 0 Loaded saved devicestate version 20

[   501][E][vfs_api.cpp:105] open(): /littlefs/prefs/config.proto does not exist, no permits for creation

INFO  | ??:??:?? 0 No /prefs/config.proto preferences found

INFO  | ??:??:?? 0 Installing default LocalConfig

INFO  | ??:??:?? 0 Setting default channel and radio preferences!

DEBUG | ??:??:?? 0 Expanding short PSK #1

INFO  | ??:??:?? 0 Wanted region 0, using UNSET

[   531][E][vfs_api.cpp:105] open(): /littlefs/prefs/module.proto does not exist, no permits for creation

INFO  | ??:??:?? 0 No /prefs/module.proto preferences found

INFO  | ??:??:?? 0 Installing default ModuleConfig

INFO  | ??:??:?? 0 Loading /prefs/channels.proto

INFO  | ??:??:?? 0 Loaded saved channelFile version 20

[   566][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation

INFO  | ??:??:?? 0 No /oem/oem.proto preferences found

DEBUG | ??:??:?? 0 Number of Device Reboots: 52

DEBUG | ??:??:?? 0 Expanding short PSK #1

INFO  | ??:??:?? 0 Wanted region 0, using UNSET

DEBUG | ??:??:?? 0 region=0, NODENUM=0x84de2c0c, dbsize=1

INFO  | ??:??:?? 0 Saving /prefs/db.proto

DEBUG | ??:??:?? 0 Read RTC time as 14

DEBUG | ??:??:?? 0 Using MSL altitude model

DEBUG | ??:??:?? 0 WANT GPS=1

WARN  | ??:??:?? 2 Failed to find UBlox & MTK GNSS Module

DEBUG | ??:??:?? 2 GxGSA NOT available

INFO  | ??:??:?? 2 External Notification Module Disabled

INFO  | ??:??:?? 2 Starting meshradio init...

INFO  | ??:??:?? 2 Radio freq=906.875, config.lora.frequency_offset=0.000

INFO  | ??:??:?? 2 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30

INFO  | ??:??:?? 2 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)

INFO  | ??:??:?? 2 Radio myRegion->numChannels: 104 x 250.000kHz

INFO  | ??:??:?? 2 Radio channel_num: 19

INFO  | ??:??:?? 2 Radio frequency: 906.875000

INFO  | ??:??:?? 2 Slot time: 42 msec

INFO  | ??:??:?? 2 Set radio: final power level=20

INFO  | ??:??:?? 2 RF95 init result -2

INFO  | ??:??:?? 2 Frequency set to 906.875000

INFO  | ??:??:?? 2 Bandwidth set to 250.000000

INFO  | ??:??:?? 2 Power output set to 20

DEBUG | ??:??:?? 2 Current limit set to 100.000000

DEBUG | ??:??:?? 2 Current limit set result -16

WARN  | ??:??:?? 2 Failed to find RF95 radio

WARN  | ??:??:?? 2 SX126xInterface(cs=18, irq=33, rst=23, busy=32)

INFO  | ??:??:?? 2 Starting meshradio init...

INFO  | ??:??:?? 2 Radio freq=906.875, config.lora.frequency_offset=0.000

INFO  | ??:??:?? 2 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30

INFO  | ??:??:?? 2 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)

INFO  | ??:??:?? 2 Radio myRegion->numChannels: 104 x 250.000kHz

INFO  | ??:??:?? 2 Radio channel_num: 19

INFO  | ??:??:?? 2 Radio frequency: 906.875000

INFO  | ??:??:?? 2 Slot time: 42 msec

INFO  | ??:??:?? 2 Set radio: final power level=22

INFO  | ??:??:?? 2 SX126x init result -707

INFO  | ??:??:?? 2 Frequency set to 906.875000

INFO  | ??:??:?? 2 Bandwidth set to 250.000000

INFO  | ??:??:?? 2 Power output set to 22

DEBUG | ??:??:?? 2 Current limit set to 140.000000

DEBUG | ??:??:?? 2 Current limit set result -707

WARN  | ??:??:?? 2 Failed to find SX1262 radio

WARN  | ??:??:?? 2 SX126xInterface(cs=18, irq=33, rst=23, busy=32)

INFO  | ??:??:?? 2 Starting meshradio init...

INFO  | ??:??:?? 2 Radio freq=906.875, config.lora.frequency_offset=0.000

INFO  | ??:??:?? 2 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30

INFO  | ??:??:?? 2 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)

INFO  | ??:??:?? 2 Radio myRegion->numChannels: 104 x 250.000kHz

INFO  | ??:??:?? 2 Radio channel_num: 19

INFO  | ??:??:?? 2 Radio frequency: 433.174988

INFO  | ??:??:?? 2 Slot time: 42 msec

INFO  | ??:??:?? 2 Set radio: final power level=22

INFO  | ??:??:?? 2 SX126x init result 0

INFO  | ??:??:?? 2 Frequency set to 433.174988

INFO  | ??:??:?? 2 Bandwidth set to 250.000000

INFO  | ??:??:?? 2 Power output set to 22

DEBUG | ??:??:?? 2 Current limit set to 140.000000

DEBUG | ??:??:?? 2 Current limit set result 0

INFO  | ??:??:?? 2 SX1268 Radio init succeeded, using SX1268 radio

INFO  | ??:??:?? 2 Not using WIFI

DEBUG | ??:??:?? 2 (bw=250, sf=11, cr=4/8) packet symLen=8 ms, payloadSize=237, time 3188 ms

DEBUG | ??:??:?? 2 myNodeInfo.bitrate = 74.341286 bytes / sec

INFO  | ??:??:?? 2 PowerFSM init, USB power=1

INFO  | ??:�?H??�?�*?????state: BOOT

[  2660][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 320 / 4 = 80 Mhz, APB: 80000000 Hz

DEBUG | ??:??:?? 2 [Power] Battery: usbPower=0, isCharging=0, batMv=0, batPct=0

INFO  | ??:??:?? 2 [RangeTestModule] Range Test Module - Disabled

INFO  | ??:??:?? 5 [PowerFSM] Enter state: POWER

INFO  | ??:??:?? 5 [PowerFSM] Initialise the NimBLE bluetooth module

INFO  | ??:??:?? 12 [DeviceTelemetryModule] (Sending): air_util_tx=0.000000, channel_utilization=0.000000, battery_level=0, voltage=0.000000

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Initial packet id 651067251, numPacketId 4294967295

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] updateTelemetry LOCAL

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Node status update: 1 online, 1 total

INFO  | ??:??:?? 12 [DeviceTelemetryModule] Sending packet to mesh

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Update DB node 0x84de2c0c, rx_time=0

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] handleReceived(LOCAL) (id=0x26ce7f75 fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] No modules interested in portnum=67, src=LOCAL

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Add packet record (id=0x26ce7f75 fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Expanding short PSK #1

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using AES128 key!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] ESP32 crypt fr=84de2c0c, num=26ce7f75, numBytes=11!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] enqueuing for send (id=0x26ce7f75 fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=1)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] txGood=0,rxGood=0,rxBad=0

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using channel 0 (hash 0x8)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Expanding short PSK #1

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using AES128 key!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] ESP32 crypt fr=84de2c0c, num=26ce7f75, numBytes=11!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] decoded message (id=0x26ce7f75 fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

DEBUG | ??:??:?? 12 [RadioIf] SX126x standby failed with error -707



assert failed: void SX126xInterface<T>::setStandby() [with T = SX1268] SX126xInterface.cpp:175 (err == RADIOLIB_ERR_NONE)





Backtrace: 0x4008448d:0x3ffd8540 0x400966a1:0x3ffd8560 0x4009c821:0x3ffd8580 0x400e053b:0x3ffd86b0 0x400dfaf8:0x3ffd86d0 0x400e4335:0x3ffd86f0 0x400e4394:0x3ffd8710 0x4020fd42:0x3ffd8730 0x400d5685:0x3ffd8750 0x400d573a:0x3ffd8770 0x400fb2fd:0x3ffd8790 0x400de3cd:0x3ffd87c0 0x4012f329:0x3ffd87e0









ELF file SHA256: a3d62f1cb6fab2f1



E (18320) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0

Rebooting...

ets Jul 29 2019 12:21:46



rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)

configsip: 0, SPIWP:0xee

clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00

mode:DIO, clock div:2

load:0x3fff0030,len:1184

load:0x40078000,len:13104

load:0x40080400,len:3036

entry 0x400805e4

E (791) esp_core_dump_flash: No core dump ?f????????found!

E (791) esp_core_dump_flash: No core dump partition found!

[    12][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz

INFO  | ??:??:?? 0 



//\ E S H T /\ S T / C



INFO  | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset

DEBUG | ??:??:?? 0 Filesystem files (589824/1048576 Bytes):

DEBUG | ??:??:?? 0  /prefs/channels.proto (53 Bytes)

DEBUG | ??:??:?? 0  /prefs/db.proto (144 Bytes)

DEBUG | ??:??:?? 0  /static/.gitkeep (0 Bytes)

DEBUG | ??:??:?? 0  /static/Logo_Black.svg.gz (592 Bytes)

DEBUG | ??:??:?? 0  /static/Logo_White.svg.gz (600 Bytes)

DEBUG | ??:??:?? 0  /static/apple-touch-icon.png.gz (4300 Bytes)

DEBUG | ??:??:?? 0  /static/favicon.ico.gz (2221 Bytes)

DEBUG | ??:??:?? 0  /static/icon.svg.gz (842 Bytes)

DEBUG | ??:??:?? 0  /static/index-3ad6b632.css.gz (14921 Bytes)

DEBUG | ??:??:?? 0  /static/index-7d0857aa.js.gz (347 Bytes)

DEBUG | ??:??:?? 0  /static/index-84fcdb37.js.gz (507158 Bytes)

DEBUG | ??:??:?? 0  /static/index.html.gz (547 Bytes)

DEBUG | ??:??:?? 0  /static/robots.txt.gz (42 Bytes)

DEBUG | ??:??:?? 0  /static/site.webmanifest.gz (196 Bytes)

[   411][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000

DEBUG | ??:??:?? 0 Using analog input 35 for battery level

INFO  | ??:??:?? 0 No I2C devices found

INFO  | ??:??:?? 0 Meshtastic hwvendor=39, swver=2.0.12.2400dd4-d

DEBUG | ??:??:?? 0 Setting random seed 781742596

DEBUG | ??:??:?? 0 Total heap: 191304

DEBUG | ??:??:?? 0 Free heap: 157004

DEBUG | ??:??:?? 0 Total PSRAM: 0

DEBUG | ??:??:?? 0 Free PSRAM: 0

DEBUG | ??:??:?? 0 NVS: UsedEntries 70, FreeEntries 560, AllEntries 630, NameSpaces 3

DEBUG | ??:??:?? 0 Setup Preferences in Flash Storage

DEBUG | ??:??:?? 0 Number of Device Reboots: 53

DEBUG | ??:??:?? 0 OTA firmware version 0.2.0.1da2617

INFO  | ??:??:?? 0 Initializing NodeDB

INFO  | ??:??:?? 0 Loading /prefs/db.proto

INFO  | ??:??:?? 0 Loaded saved devicestate version 20

[   515][E][vfs_api.cpp:105] open(): /littlefs/prefs/config.proto does not exist, no permits for creation

INFO  | ??:??:?? 0 No /prefs/config.proto preferences found

INFO  | ??:??:?? 0 Installing default LocalConfig

INFO  | ??:??:?? 0 Setting default channel and radio preferences!

DEBUG | ??:??:?? 0 Expanding short PSK #1

INFO  | ??:??:?? 0 Wanted region 0, using UNSET

[   546][E][vfs_api.cpp:105] open(): /littlefs/prefs/module.proto does not exist, no permits for creation

INFO  | ??:??:?? 0 No /prefs/module.proto preferences found

INFO  | ??:??:?? 0 Installing default ModuleConfig

INFO  | ??:??:?? 0 Loading /prefs/channels.proto

INFO  | ??:??:?? 0 Loaded saved channelFile version 20

[   589][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation

INFO  | ??:??:?? 0 No /oem/oem.proto preferences found

DEBUG | ??:??:?? 0 Number of Device Reboots: 53

DEBUG | ??:??:?? 0 Expanding short PSK #1

INFO  | ??:??:?? 0 Wanted region 0, using UNSET

DEBUG | ??:??:?? 0 region=0, NODENUM=0x84de2c0c, dbsize=1

INFO  | ??:??:?? 0 Saving /prefs/db.proto

DEBUG | ??:??:?? 0 Read RTC time as 27

DEBUG | ??:??:?? 0 Using MSL altitude model

DEBUG | ??:??:?? 0 WANT GPS=1

WARN  | ??:??:?? 2 Failed to find UBlox & MTK GNSS Module

DEBUG | ??:??:?? 2 GxGSA NOT available

INFO  | ??:??:?? 2 External Notification Module Disabled

INFO  | ??:??:?? 2 Starting meshradio init...

INFO  | ??:??:?? 2 Radio freq=906.875, config.lora.frequency_offset=0.000

INFO  | ??:??:?? 2 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30

INFO  | ??:??:?? 2 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)

INFO  | ??:??:?? 2 Radio myRegion->numChannels: 104 x 250.000kHz

INFO  | ??:??:?? 2 Radio channel_num: 19

INFO  | ??:??:?? 2 Radio frequency: 906.875000

INFO  | ??:??:?? 2 Slot time: 42 msec

INFO  | ??:??:?? 2 Set radio: final power level=20

INFO  | ??:??:?? 2 RF95 init result -2

INFO  | ??:??:?? 2 Frequency set to 906.875000

INFO  | ??:??:?? 2 Bandwidth set to 250.000000

INFO  | ??:??:?? 2 Power output set to 20

DEBUG | ??:??:?? 2 Current limit set to 100.000000

DEBUG | ??:??:?? 2 Current limit set result -16

WARN  | ??:??:?? 2 Failed to find RF95 radio

WARN  | ??:??:?? 2 SX126xInterface(cs=18, irq=33, rst=23, busy=32)

INFO  | ??:??:?? 2 Starting meshradio init...

INFO  | ??:??:?? 2 Radio freq=906.875, config.lora.frequency_offset=0.000

INFO  | ??:??:?? 2 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30

INFO  | ??:??:?? 2 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)

INFO  | ??:??:?? 2 Radio myRegion->numChannels: 104 x 250.000kHz

INFO  | ??:??:?? 2 Radio channel_num: 19

INFO  | ??:??:?? 2 Radio frequency: 906.875000

INFO  | ??:??:?? 2 Slot time: 42 msec

INFO  | ??:??:?? 2 Set radio: final power level=22

INFO  | ??:??:?? 2 SX126x init result -707

INFO  | ??:??:?? 2 Frequency set to 906.875000

INFO  | ??:??:?? 2 Bandwidth set to 250.000000

INFO  | ??:??:?? 2 Power output set to 22

DEBUG | ??:??:?? 2 Current limit set to 140.000000

DEBUG | ??:??:?? 2 Current limit set result -707

WARN  | ??:??:?? 2 Failed to find SX1262 radio

WARN  | ??:??:?? 2 SX126xInterface(cs=18, irq=33, rst=23, busy=32)

INFO  | ??:??:?? 2 Starting meshradio init...

INFO  | ??:??:?? 2 Radio freq=906.875, config.lora.frequency_offset=0.000

INFO  | ??:??:?? 2 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30

INFO  | ??:??:?? 2 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)

INFO  | ??:??:?? 2 Radio myRegion->numChannels: 104 x 250.000kHz

INFO  | ??:??:?? 2 Radio channel_num: 19

INFO  | ??:??:?? 2 Radio frequency: 433.174988

INFO  | ??:??:?? 2 Slot time: 42 msec

INFO  | ??:??:?? 2 Set radio: final power level=22

INFO  | ??:??:?? 2 SX126x init result 0

INFO  | ??:??:?? 2 Frequency set to 433.174988

INFO  | ??:??:?? 2 Bandwidth set to 250.000000

INFO  | ??:??:?? 2 Power output set to 22

DEBUG | ??:??:?? 2 Current limit set to 140.000000

DEBUG | ??:??:?? 2 Current limit set result 0

INFO  | ??:??:?? 2 SX1268 Radio init succeeded, using SX1268 radio

INFO  | ??:??:?? 2 Not using WIFI

DEBUG | ??:??:?? 2 (bw=250, sf=11, cr=4/8) packet symLen=8 ms, payloadSize=237, time 3188 ms

DEBUG | ??:??:?? 2 myNodeInfo.bitrate = 74.341286 bytes / sec

INFO  | ??:??:?? 2 PowerFSM init, USB power=1

INFO  | ??:?????�?�*?????state: BOOT

[  2703][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 320 / 4 = 80 Mhz, APB: 80000000 Hz

DEBUG | ??:??:?? 2 [Power] Battery: usbPower=0, isCharging=0, batMv=0, batPct=0

INFO  | ??:??:?? 2 [RangeTestModule] Range Test Module - Disabled

INFO  | ??:??:?? 5 [PowerFSM] Enter state: POWER

INFO  | ??:??:?? 5 [PowerFSM] Initialise the NimBLE bluetooth module

INFO  | ??:??:?? 12 [DeviceTelemetryModule] (Sending): air_util_tx=0.000000, channel_utilization=0.000000, battery_level=0, voltage=0.000000

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Initial packet id 1521811067, numPacketId 4294967295

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] updateTelemetry LOCAL

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Node status update: 1 online, 1 total

INFO  | ??:??:?? 12 [DeviceTelemetryModule] Sending packet to mesh

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Update DB node 0x84de2c0c, rx_time=0

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] handleReceived(LOCAL) (id=0x5ab4fe7d fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] No modules interested in portnum=67, src=LOCAL

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Add packet record (id=0x5ab4fe7d fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Expanding short PSK #1

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using AES128 key!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] ESP32 crypt fr=84de2c0c, num=5ab4fe7d, numBytes=11!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] enqueuing for send (id=0x5ab4fe7d fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=1)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] txGood=0,rxGood=0,rxBad=0

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using channel 0 (hash 0x8)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Expanding short PSK #1

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using AES128 key!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] ESP32 crypt fr=84de2c0c, num=5ab4fe7d, numBytes=11!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] decoded message (id=0x5ab4fe7d fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

DEBUG | ??:??:?? 12 [RadioIf] SX126x standby failed with error -707



assert failed: void SX126xInterface<T>::setStandby() [with T = SX1268] SX126xInterface.cpp:175 (err == RADIOLIB_ERR_NONE)





Backtrace: 0x4008448d:0x3ffd8540 0x400966a1:0x3ffd8560 0x4009c821:0x3ffd8580 0x400e053b:0x3ffd86b0 0x400dfaf8:0x3ffd86d0 0x400e4335:0x3ffd86f0 0x400e4394:0x3ffd8710 0x4020fd42:0x3ffd8730 0x400d5685:0x3ffd8750 0x400d573a:0x3ffd8770 0x400fb2fd:0x3ffd8790 0x400de3cd:0x3ffd87c0 0x4012f329:0x3ffd87e0









ELF file SHA256: a3d62f1cb6fab2f1



E (18412) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0

Rebooting...

ets Jul 29 2019 12:21:46



rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)

configsip: 0, SPIWP:0xee

clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00

mode:DIO, clock div:2

load:0x3fff0030,len:1184

load:0x40078000,len:13104

load:0x40080400,len:3036

entry 0x400805e4

E (791) esp_core_dump_flash: No core dump ?f????????found!

E (791) esp_core_dump_flash: No core dump partition found!

[    12][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz

INFO  | ??:??:?? 0 



//\ E S H T /\ S T / C



INFO  | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset

DEBUG | ??:??:?? 0 Filesystem files (589824/1048576 Bytes):

DEBUG | ??:??:?? 0  /prefs/channels.proto (53 Bytes)

DEBUG | ??:??:?? 0  /prefs/db.proto (144 Bytes)

DEBUG | ??:??:?? 0  /static/.gitkeep (0 Bytes)

DEBUG | ??:??:?? 0  /static/Logo_Black.svg.gz (592 Bytes)

DEBUG | ??:??:?? 0  /static/Logo_White.svg.gz (600 Bytes)

DEBUG | ??:??:?? 0  /static/apple-touch-icon.png.gz (4300 Bytes)

DEBUG | ??:??:?? 0  /static/favicon.ico.gz (2221 Bytes)

DEBUG | ??:??:?? 0  /static/icon.svg.gz (842 Bytes)

DEBUG | ??:??:?? 0  /static/index-3ad6b632.css.gz (14921 Bytes)

DEBUG | ??:??:?? 0  /static/index-7d0857aa.js.gz (347 Bytes)

DEBUG | ??:??:?? 0  /static/index-84fcdb37.js.gz (507158 Bytes)

DEBUG | ??:??:?? 0  /static/index.html.gz (547 Bytes)

DEBUG | ??:??:?? 0  /static/robots.txt.gz (42 Bytes)

DEBUG | ??:??:?? 0  /static/site.webmanifest.gz (196 Bytes)

[   429][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000

DEBUG | ??:??:?? 0 Using analog input 35 for battery level

INFO  | ??:??:?? 0 No I2C devices found

INFO  | ??:??:?? 0 Meshtastic hwvendor=39, swver=2.0.12.2400dd4-d

DEBUG | ??:??:?? 0 Setting random seed 3412113819

DEBUG | ??:??:?? 0 Total heap: 191304

DEBUG | ??:??:?? 0 Free heap: 157004

DEBUG | ??:??:?? 0 Total PSRAM: 0

DEBUG | ??:??:?? 0 Free PSRAM: 0

DEBUG | ??:??:?? 0 NVS: UsedEntries 70, FreeEntries 560, AllEntries 630, NameSpaces 3

DEBUG | ??:??:?? 0 Setup Preferences in Flash Storage

DEBUG | ??:??:?? 0 Number of Device Reboots: 54

DEBUG | ??:??:?? 0 OTA firmware version 0.2.0.1da2617

INFO  | ??:??:?? 0 Initializing NodeDB

INFO  | ??:??:?? 0 Loading /prefs/db.proto

INFO  | ??:??:?? 0 Loaded saved devicestate version 20

[   539][E][vfs_api.cpp:105] open(): /littlefs/prefs/config.proto does not exist, no permits for creation

INFO  | ??:??:?? 0 No /prefs/config.proto preferences found

INFO  | ??:??:?? 0 Installing default LocalConfig

INFO  | ??:??:?? 0 Setting default channel and radio preferences!

DEBUG | ??:??:?? 0 Expanding short PSK #1

INFO  | ??:??:?? 0 Wanted region 0, using UNSET

[   571][E][vfs_api.cpp:105] open(): /littlefs/prefs/module.proto does not exist, no permits for creation

INFO  | ??:??:?? 0 No /prefs/module.proto preferences found

INFO  | ??:??:?? 0 Installing default ModuleConfig

INFO  | ??:??:?? 0 Loading /prefs/channels.proto

INFO  | ??:??:?? 0 Loaded saved channelFile version 20

[   628][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation

INFO  | ??:??:?? 0 No /oem/oem.proto preferences found

DEBUG | ??:??:?? 0 Number of Device Reboots: 54

DEBUG | ??:??:?? 0 Expanding short PSK #1

INFO  | ??:??:?? 0 Wanted region 0, using UNSET

DEBUG | ??:??:?? 0 region=0, NODENUM=0x84de2c0c, dbsize=1

INFO  | ??:??:?? 0 Saving /prefs/db.proto

DEBUG | ??:??:?? 0 Read RTC time as 41

DEBUG | ??:??:?? 0 Using MSL altitude model

DEBUG | ??:??:?? 0 WANT GPS=1

WARN  | ??:??:?? 2 Failed to find UBlox & MTK GNSS Module

DEBUG | ??:??:?? 2 GxGSA NOT available

INFO  | ??:??:?? 2 External Notification Module Disabled

INFO  | ??:??:?? 2 Starting meshradio init...

INFO  | ??:??:?? 2 Radio freq=906.875, config.lora.frequency_offset=0.000

INFO  | ??:??:?? 2 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30

INFO  | ??:??:?? 2 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)

INFO  | ??:??:?? 2 Radio myRegion->numChannels: 104 x 250.000kHz

INFO  | ??:??:?? 2 Radio channel_num: 19

INFO  | ??:??:?? 2 Radio frequency: 906.875000

INFO  | ??:??:?? 2 Slot time: 42 msec

INFO  | ??:??:?? 2 Set radio: final power level=20

INFO  | ??:??:?? 2 RF95 init result -2

INFO  | ??:??:?? 2 Frequency set to 906.875000

INFO  | ??:??:?? 2 Bandwidth set to 250.000000

INFO  | ??:??:?? 2 Power output set to 20

DEBUG | ??:??:?? 2 Current limit set to 100.000000

DEBUG | ??:??:?? 2 Current limit set result -16

WARN  | ??:??:?? 2 Failed to find RF95 radio

WARN  | ??:??:?? 2 SX126xInterface(cs=18, irq=33, rst=23, busy=32)

INFO  | ??:??:?? 2 Starting meshradio init...

INFO  | ??:??:?? 2 Radio freq=906.875, config.lora.frequency_offset=0.000

INFO  | ??:??:?? 2 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30

INFO  | ??:??:?? 2 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)

INFO  | ??:??:?? 2 Radio myRegion->numChannels: 104 x 250.000kHz

INFO  | ??:??:?? 2 Radio channel_num: 19

INFO  | ??:??:?? 2 Radio frequency: 906.875000

INFO  | ??:??:?? 2 Slot time: 42 msec

INFO  | ??:??:?? 2 Set radio: final power level=22

INFO  | ??:??:?? 2 SX126x init result -707

INFO  | ??:??:?? 2 Frequency set to 906.875000

INFO  | ??:??:?? 2 Bandwidth set to 250.000000

INFO  | ??:??:?? 2 Power output set to 22

DEBUG | ??:??:?? 2 Current limit set to 140.000000

DEBUG | ??:??:?? 2 Current limit set result -707

WARN  | ??:??:?? 2 Failed to find SX1262 radio

WARN  | ??:??:?? 2 SX126xInterface(cs=18, irq=33, rst=23, busy=32)

INFO  | ??:??:?? 2 Starting meshradio init...

INFO  | ??:??:?? 2 Radio freq=906.875, config.lora.frequency_offset=0.000

INFO  | ??:??:?? 2 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30

INFO  | ??:??:?? 2 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)

INFO  | ??:??:?? 2 Radio myRegion->numChannels: 104 x 250.000kHz

INFO  | ??:??:?? 2 Radio channel_num: 19

INFO  | ??:??:?? 2 Radio frequency: 433.174988

INFO  | ??:??:?? 2 Slot time: 42 msec

INFO  | ??:??:?? 2 Set radio: final power level=22

INFO  | ??:??:?? 2 SX126x init result 0

INFO  | ??:??:?? 2 Frequency set to 433.174988

INFO  | ??:??:?? 2 Bandwidth set to 250.000000

INFO  | ??:??:?? 2 Power output set to 22

DEBUG | ??:??:?? 2 Current limit set to 140.000000

DEBUG | ??:??:?? 2 Current limit set result 0

INFO  | ??:??:?? 2 SX1268 Radio init succeeded, using SX1268 radio

INFO  | ??:??:?? 2 Not using WIFI

DEBUG | ??:??:?? 2 (bw=250, sf=11, cr=4/8) packet symLen=8 ms, payloadSize=237, time 3188 ms

DEBUG | ??:??:?? 2 myNodeInfo.bitrate = 74.341286 bytes / sec

INFO  | ??:??:?? 2 PowerFSM init, USB power=1

INFO  | ??:?????�?�*?????state: BOOT

[  2761][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 320 / 4 = 80 Mhz, APB: 80000000 Hz

DEBUG | ??:??:?? 2 [Power] Battery: usbPower=0, isCharging=0, batMv=0, batPct=0

INFO  | ??:??:?? 2 [RangeTestModule] Range Test Module - Disabled

INFO  | ??:??:?? 5 [PowerFSM] Enter state: POWER

INFO  | ??:??:?? 5 [PowerFSM] Initialise the NimBLE bluetooth module

INFO  | ??:??:?? 12 [DeviceTelemetryModule] (Sending): air_util_tx=0.000000, channel_utilization=0.000000, battery_level=0, voltage=0.000000

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Initial packet id 1088626508, numPacketId 4294967295

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] updateTelemetry LOCAL

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Node status update: 1 online, 1 total

INFO  | ??:??:?? 12 [DeviceTelemetryModule] Sending packet to mesh

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Update DB node 0x84de2c0c, rx_time=0

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] handleReceived(LOCAL) (id=0x40e31f4e fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] No modules interested in portnum=67, src=LOCAL

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Add packet record (id=0x40e31f4e fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Expanding short PSK #1

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using AES128 key!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] ESP32 crypt fr=84de2c0c, num=40e31f4e, numBytes=11!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] enqueuing for send (id=0x40e31f4e fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x8 encrypted priority=1)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] txGood=0,rxGood=0,rxBad=0

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using channel 0 (hash 0x8)

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Expanding short PSK #1

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] Using AES128 key!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] ESP32 crypt fr=84de2c0c, num=40e31f4e, numBytes=11!

DEBUG | ??:??:?? 12 [DeviceTelemetryModule] decoded message (id=0x40e31f4e fr=0x0c to=0xff, WantAck=0, HopLim=3 Ch=0x0 Portnum=67 priority=1)

DEBUG | ??:??:?? 12 [RadioIf] SX126x standby failed with error -707



assert failed: void SX126xInterface<T>::setStandby() [with T = SX1268] SX126xInterface.cpp:175 (err == RADIOLIB_ERR_NONE)





Backtrace: 0x4008448d:0x3ffd8540 0x400966a1:0x3ffd8560 0x4009c821:0x3ffd8580 0x400e053b:0x3ffd86b0 0x400dfaf8:0x3ffd86d0 0x400e4335:0x3ffd86f0 0x400e4394:0x3ffd8710 0x4020fd42:0x3ffd8730 0x400d5685:0x3ffd8750 0x400d573a:0x3ffd8770 0x400fb2fd:0x3ffd8790 0x400de3cd:0x3ffd87c0 0x4012f329:0x3ffd87e0









ELF file SHA256: a3d62f1cb6fab2f1



E (18665) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0

Rebooting...

ets Jul 29 2019 12:21:46



rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)

configsip: 0, SPIWP:0xee

clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00

mode:DIO, clock div:2

load:0x3fff0030,len:1184

load:0x40078000,len:13104

load:0x40080400,len:3036

entry 0x400805e4

E (791) esp_core_dump_flash: No core dump ?f????????found!

E (791) esp_core_dump_flash: No core dump partition found!

[    12][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz

INFO  | ??:??:?? 0

caveman99 · 2023-04-02T13:24:32Z

this will be fixed in release 2.1.7

SCWhite · 2024-04-12T11:40:46Z

@caveman99
HI, Can you kindly explain how is this being fixed?

I'm building a diy hardware with :
Adafruit nRF52840 Feather + sx1262 Lora chip

Testing with Firmware Version:
2.3.4.ea61808

Description:
device will boot, but when I try to change reign setting with Meshtastic APP
it'll crash and reboot

Showing

DEBUG | ??:??:?? 21 [Router] SX126x standby failed with error -707
ERROR | ??:??:?? 21 [Router] assert failed src\mesh\SX126xInterface.cpp: 222, void SX126xInterface<T>::setStandby() [with T = SX1262], t

Firmware before 2.1.11 works fine, I'm guessing has something to do with new parameter in
RadioLibInterface(hal, cs, irq, rst, busy)

Any thing helps, thanks!

GUVWAF · 2024-04-12T11:54:15Z

@SCWhite

See:
https://github.com/jgromes/RadioLib/blob/d77823375a3c4329a1a1182fcf4787f008878810/src/modules/SX126x/SX1262.h#L42

Do you have #define SX126X_DIO3_TCXO_VOLTAGE set in your variant file? Depending on whether you module has a TCXO or not, you should set this to the correct voltage.

SCWhite · 2024-04-12T12:06:58Z

@GUVWAF

Thanks for the fast reply, I've tried delete that define / set to 0 but I still get the same error
I'll try to ground DIO3, make sure TCXO isn't working.

Thanks, will report back soon!

SCWhite · 2024-04-12T14:35:09Z

HI @GUVWAF

So, this is what I find out.

According to the datasheet:
"set pin to HIGH to enable TCXO, LOW to put TCXO to sleep"

I followed most design by not connecting DIO3, hence #define SX126X_DIO3_TCXO_VOLTAGE should be 0V
and to make sure I'm not using it, I even try to solder that pin directly to GND

but I still get

SX126x standby failed with error -707

it turns out, the TCXO was actually connected in the chip, internally.
so I had to do #define SX126X_DIO3_TCXO_VOLTAGE 1.8 to make it work.

never had thought of that.

Thanks for the advice, you saved me tons of time and brain cell.
You're the best !

Andrey-VD added the bug Something isn't working label Jan 26, 2023

GUVWAF mentioned this issue Mar 20, 2023

[Bug]: MCU freezes on init radio. #2369

Closed

caveman99 closed this as completed Apr 2, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[Bug]: [RadioIf] SX126x standby failed with error -707 #2208

[Bug]: [RadioIf] SX126x standby failed with error -707 #2208

Andrey-VD commented Jan 26, 2023

caveman99 commented Apr 2, 2023

SCWhite commented Apr 12, 2024

GUVWAF commented Apr 12, 2024

SCWhite commented Apr 12, 2024

SCWhite commented Apr 12, 2024

[Bug]: [RadioIf] SX126x standby failed with error -707 #2208

[Bug]: [RadioIf] SX126x standby failed with error -707 #2208

Comments

Andrey-VD commented Jan 26, 2023

Category

Hardware

Firmware Version

Description

Relevant log output

caveman99 commented Apr 2, 2023

SCWhite commented Apr 12, 2024

GUVWAF commented Apr 12, 2024

SCWhite commented Apr 12, 2024

SCWhite commented Apr 12, 2024