The objective of ParaTest is to support parallel testing in PHPUnit. Provided you have well-written PHPUnit tests, you can drop paratest in your project and
start using it with no additional bootstrap or configurations!
Why use paratest over the alternative parallel test runners out there?
- Code Coverage report combining. Run your tests in N parallel processes and all the code coverage output will be combined into one report.
- Zero configuration. After composer install, run with
vendor/bin/paratest. That's it! - Flexible. Isolate test files in separate processes or take advantage of WrapperRunner for even faster runs.
To install with composer run the following command:
composer require --dev brianium/paratest
Only the latest version of PHPUnit is supported, and thus only the latest version of ParaTest is actively maintained.
This is because of the following reasons:
- To reduce bugs, code duplication and incompatibilities with PHPUnit, from version 5 ParaTest heavily relies on PHPUnit
@internalclasses - The fast pace both PHP and PHPUnit have taken recently adds too much maintenance burden, which we can only afford for the latest versions to stay up-to-date
After installation, the binary can be found at vendor/bin/paratest. Usage is as follows:
Usage:
paratest [options] [--] [<path>]
Arguments:
path The path to a directory or file containing tests.
Options:
--bootstrap=BOOTSTRAP The bootstrap file to be used by PHPUnit.
--colors Displays a colored bar as a test result.
-c, --configuration=CONFIGURATION The PHPUnit configuration file to use.
--coverage-clover=COVERAGE-CLOVER Generate code coverage report in Clover XML format.
--coverage-cobertura=COVERAGE-COBERTURA Generate code coverage report in Cobertura XML format.
--coverage-crap4j=COVERAGE-CRAP4J Generate code coverage report in Crap4J XML format.
--coverage-html=COVERAGE-HTML Generate code coverage report in HTML format.
--coverage-php=COVERAGE-PHP Serialize PHP_CodeCoverage object to file.
--coverage-test-limit=COVERAGE-TEST-LIMIT Limit the number of tests to record for each line of code. Helps to reduce memory and size of coverage reports.
--coverage-text Generate code coverage report in text format.
--coverage-xml=COVERAGE-XML Generate code coverage report in PHPUnit XML format.
--exclude-group=EXCLUDE-GROUP Don't run tests from the specified group(s).
--filter=FILTER Filter (only for functional mode).
-f, --functional Run test methods instead of classes in separate processes.
-g, --group=GROUP Only runs tests from the specified group(s).
-h, --help Display this help message.
--log-junit=LOG-JUNIT Log test execution in JUnit XML format to file.
--log-teamcity=LOG-TEAMCITY Log test execution in Teamcity format to file.
-m, --max-batch-size=MAX-BATCH-SIZE Max batch size (only for functional mode). [default: 0]
--no-test-tokens Disable TEST_TOKEN environment variables. (default: variable is set)
--order-by[=ORDER-BY] Run tests in order: default|random|reverse
--parallel-suite Run the suites of the config in parallel.
--passthru=PASSTHRU Pass the given arguments verbatim to the underlying test framework. Example: --passthru="'--prepend' 'xdebug-filter.php'"
--passthru-php=PASSTHRU-PHP Pass the given arguments verbatim to the underlying php process. Example: --passthru-php="'-d' 'zend_extension=xdebug.so'"
--path=PATH An alias for the path argument.
-p, --processes=PROCESSES The number of test processes to run. [default: "auto"]
--random-order-seed=[RANDOM-ORDER-SEED] Use a specific random seed <N> for random order
--runner=RUNNER Runner or WrapperRunner. [default: "Runner"]
--stop-on-failure Don't start any more processes after a failure.
--testsuite=TESTSUITE Filter which testsuite to run
--tmp-dir=TMP-DIR Temporary directory for internal ParaTest files [default: sys_get_temp_dir()]
-v, --verbose=VERBOSE If given, debug output is printed. Example: --verbose=1 [default: 0]
--whitelist=WHITELIST Directory to add to the coverage whitelist.
To get the most out of paratest, you have to adjust the parameters carefully.
-
Adjust the number of processes with
-pTo allow full usage of your cpu cores, you should have at least one process per core. More processes allow better resource usage but keep in mind that each process has its own costs for spawning. The default is auto, which means the number of logical CPU cores is set as number of processes. You might try something like logical
CPU cores * 2(e.g. if you have 8 logical cores, you might try16), but keep in mind that each process generates a little bit of overhead as well. -
Choose between per-testcase- and per-testmethod-parallelization with
-fGiven you have few testcases (classes) with many long running methods, you should use the
-foption to enable thefunctional modeand allow different methods of the same class to be executed in parallel. Keep in mind that the default is per-testcase-parallelization to address inter-testmethod dependencies. Note that in most projects, using-fis slower since each test method will need to be bootstrapped separately. -
Use the WrapperRunner if possible
The default Runner for PHPUnit spawns a new process for each testcase (or method in functional mode). This provides the highest compatibility but comes with the cost of many spawned processes and a bootstrapping for each process. Especially when you have a slow bootstrapping in your tests (like a database setup) you should try the WrapperRunner with
--runner WrapperRunner. It spawns one "worker"-process for each parallel process (-p), executes the bootstrapping once and reuses these processes for each test executed. That way the overhead of process spawning and bootstrapping is reduced to the minimum. -
Tune batch max size
--max-batch-sizeBatch size will affect on max amount of atomic tests which will be used for single test method. One atomic test will be either one test method from test class if no data provider available for method or will be only one item from dataset for method. Increase this value to reduce per-process overhead and in most cases it will also reduce parallel efficiency. Decrease this value to increase per-process overhead and in most cases it will also increase parallel efficiency. If amount of all tests less then max batch size then everything will be processed in one process thread so paratest is completely useless in that case. The best way to find the most effective batch size is to test with different batch size values and select best. Max batch size = 0 means that grouping in batches will not be used and one batch will equal to all method tests (one or all from data provider). Max batch size = 1 means that each batch will contain only one test from data provider or one method if data provider is not used. Bigger max batch size can significantly increase phpunit command line length so process can failed. Decrease max batch size to reduce command line length. Windows has limit around 32k, Linux - 2048k, Mac OS X - 256k.
Examples assume your tests are located under ./test/unit.
# Run all unit tests in 8 parallel processes
vendor/bin/paratest -p8 test/unit
# Run all unit tests in 4 parallel processes with WrapperRunner and output html code coverage report to /tmp/coverage
# (Code coverage requires Xdebug to be installed)
vendor/bin/paratest -p4 --runner=WrapperRunner --coverage-html=/tmp/coverage test/unit
If you run into problems with paratest, try to get more information about the issue by enabling debug output via --verbose=1.
When a sub-process fails, the originating command is given in the output and can then be copy-pasted in the terminal
to be run and debugged. All internal commands run with --printer [...]\NullPhpunitPrinter which silence the original
PHPUnit output: during a debugging run remove that option to restore the output and see what PHPUnit is doing.
Beginning from PHPUnit 9.3.4, it is strongly advised to set a coverage cache directory, see PHPUnit Changlog @ 9.3.4.
The cache is always warmed by ParaTest before executing the test suite.
Examples assume your tests are located under ./test/unit.
vendor/bin/paratest --coverage-text test/unit
Running phpunit in 1 process with /codebase/paratest/vendor/phpunit/phpunit/phpunit
Configuration read from /codebase/paratest/phpunit.xml.dist
............................................................... 63 / 155 ( 40%)
............................................................... 126 / 157 ( 80%)
.....................................
Time: 27.2 seconds, Memory: 8.00MB
OK (163 tests, 328 assertions)
Code Coverage Report:
2019-01-25 09:41:26
Summary:
Classes: 22.86% (8/35)
Methods: 49.47% (139/281)
Lines: 59.38% (896/1509)
Caution: Generating coverage is an art in itself. Please refer to our extensive guide on setting up everything correctly for
code coverage generation with paratest.
Windows users be sure to use the appropriate batch files.
An example being:
vendor\bin\paratest.bat ...
ParaTest assumes PSR-0 for loading tests.
For convenience paratest windows version use 79 columns mode to prevent blank lines in standard 80x25 windows console.
When running PHPUnit tests, ParaTest will automatically pass the phpunit.xml or phpunit.xml.dist to the phpunit runner via the --configuration switch. ParaTest also allows the configuration path to be specified manually.
ParaTest will rely on the testsuites node of phpunit's xml configuration to handle loading of suites.
The following phpunit config file is used for ParaTest's test cases.
<?xml version="1.0" encoding="UTF-8"?>
<phpunit>
<testsuites>
<testsuite name="ParaTest Fixtures">
<directory>./tests/</directory>
</testsuite>
</testsuites>
</phpunit>The TEST_TOKEN environment variable is guaranteed to have a value that is different
from every other currently running test. This is useful to e.g. use a different database
for each test:
if (getenv('TEST_TOKEN') !== false) { // Using paratest
$dbname = 'testdb_' . getenv('TEST_TOKEN');
} else {
$dbname = 'testdb';
}Note that The display_errors php.ini directive must be set to stderr to run the test suite.
Before creating a Pull Request be sure to run all the necessary checks with make command.
For an example of ParaTest out in the wild check out the example.