This repository contains a PCB design for a WIFI JTAG probe using the ESP-12 ESP8266 module. The probe is designed to be compatible with blackmagic-espidf. The JTAG signals (+UART) are connected as follows to ESP8266 GPIOs:
JTAG Signal | GPIO |
---|---|
TXD | 1 |
RXD | 3 |
TMS/SWDIO | 4 |
TCK/SWCLK | 5 |
SRST | 12 |
TDI | 13 |
TDO | 14 |
In addition, the 10-pin connector provides 5V and 3.3V supplies. The PCB is provided with power via USB and 3.3V is provided by a cheap 1117 linear regulator.
The design is licensed under the CERN Open Hardware Licence Version 2 - Permissive.