any chance you can add the COMFOFOND-sensors?

[pesmi30]

I have a ComfoAirQ system with a Comfofond attached.
That Comfofond has 4 sensors, that are present in the ComfoConnect:

SENSOR_COMFOFOND_TEMP_OUTDOOR = 416
SENSOR_COMFOFOND_TEMP_GROUND = 417
SENSOR_COMFOFOND_PERC_GHESTATE = 418
SENSOR_COMFOFOND_GHE_PRESENT = 419

A year ago I wrote my own Python program to report these sensors (along with the 'normal' ComfoAirQ sensors; so I know they are available)
I would love to have those comfofond-sensors available as 'HomeAssistant-sensors' (especially the first three),
I tried to 'fork' your integration to add them myself, but I am a poor programmer...

[pesmi30]

Thank you for you attention on this.
I just installed the new version (0.1.9) but I can't find the new sensors...

[michaelarnauts]

They are disabled by default, you should find them in the collapsed "not shown" entities section of the Diagnostic box on the ComfoAirQ device page.

[pesmi30]

I must be stupid…. but can’t find Van: Michaël Arnauts ***@***.***> Verzonden: dinsdag 2 april 2024 16:33 Aan: michaelarnauts/home-assistant-comfoconnect ***@***.***> CC: pesmi30 ***@***.***>; Author ***@***.***> Onderwerp: Re: [michaelarnauts/home-assistant-comfoconnect] any chance you can add the COMFOFOND-sensors? (Issue #38) They are disabled by default, you should find them in the collapsed "not shown" entities section of the Diagnostic box on the ComfoAirQ device page. image.png (view on web) <https://github.com/michaelarnauts/home-assistant-comfoconnect/assets/1193779/f355da2b-05b2-456d-a372-b1e079a8e1ce> — Reply to this email directly, view it on GitHub <#38 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AP4YFQJH7AD36KBTLDCZS6DY3K6RRAVCNFSM6AAAAABDD5SMSGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMZSGIYDKNZZGU> . You are receiving this because you authored the thread. <https://github.com/notifications/beacon/AP4YFQOYRVYRPAEK7RUR4XTY3K6RRA5CNFSM6AAAAABDD5SMSGWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTZED76G.gif> Message ID: ***@***.*** ***@***.***> >

[pesmi30]

After (yesterday) installing the latest version (0.1.10) I now have the new sensors available!
Thank you very much!