Releases: microsoft/devicescript-pico
Releases · microsoft/devicescript-pico
v2.16.1
KittenBot NanoScript 1.0
A RP2040 board featuring a Jacdac connector, compatible with SMT-mounting.
Links: info firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO16, led.rgb[0].pin, io
led.rgb[1].pin: GPIO14, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO0, log.pinTX, io
services.power[0].pinEn: GPIO22, services.power[0].pinEn, io
services.power[0].pinFault: GPIO12, services.power[0].pinFault, io
services.power[0].pinPulse: GPIO8, services.power[0].pinPulse, io
services.power[0].pinLedPulse: GPIO13, services.power[0].pinLedPulse, io
services.power[0].pinUsbDetect: GPIO11, services.power[0].pinUsbDetect, io
MSR RP2040 Brain 124 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO16, led.rgb[0].pin, io
led.rgb[1].pin: GPIO14, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO0, log.pinTX, io
services.power[0].pinEn: GPIO22, services.power[0].pinEn, io
services.power[0].pinFault: GPIO12, services.power[0].pinFault, io
services.power[0].pinPulse: GPIO8, services.power[0].pinPulse, io
services.power[0].pinLedPulse: GPIO13, services.power[0].pinLedPulse, io
services.power[0].pinUsbDetect: GPIO11, services.power[0].pinUsbDetect, io
MSR Brain RP2040 59 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 11, 13, 15 (use setStatusLight to control)
- Serial logging on pin 2 at 115200 8N1
- Service: power (auto-start)
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO11, led.rgb[0].pin, io
led.rgb[1].pin: GPIO13, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO2, log.pinTX, io
services.power[0].pinEn: GPIO19, services.power[0].pinEn, io
services.power[0].pinFault: GPIO25, services.power[0].pinFault, io
Raspberry Pi Pico
RP2040 board from Raspberry Pi.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, io
Raspberry Pi Pico W
RP2040 board from Raspberry Pi with a WiFi chip.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, wifi
v2.15.1900
KittenBot NanoScript 1.0
A RP2040 board featuring a Jacdac connector, compatible with SMT-mounting.
Links: info firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO16, led.rgb[0].pin, io
led.rgb[1].pin: GPIO14, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO0, log.pinTX, io
services.power[0].pinEn: GPIO22, services.power[0].pinEn, io
services.power[0].pinFault: GPIO12, services.power[0].pinFault, io
services.power[0].pinPulse: GPIO8, services.power[0].pinPulse, io
services.power[0].pinLedPulse: GPIO13, services.power[0].pinLedPulse, io
services.power[0].pinUsbDetect: GPIO11, services.power[0].pinUsbDetect, io
MSR RP2040 Brain 124 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO16, led.rgb[0].pin, io
led.rgb[1].pin: GPIO14, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO0, log.pinTX, io
services.power[0].pinEn: GPIO22, services.power[0].pinEn, io
services.power[0].pinFault: GPIO12, services.power[0].pinFault, io
services.power[0].pinPulse: GPIO8, services.power[0].pinPulse, io
services.power[0].pinLedPulse: GPIO13, services.power[0].pinLedPulse, io
services.power[0].pinUsbDetect: GPIO11, services.power[0].pinUsbDetect, io
MSR Brain RP2040 59 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 11, 13, 15 (use setStatusLight to control)
- Serial logging on pin 2 at 115200 8N1
- Service: power (auto-start)
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO11, led.rgb[0].pin, io
led.rgb[1].pin: GPIO13, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO2, log.pinTX, io
services.power[0].pinEn: GPIO19, services.power[0].pinEn, io
services.power[0].pinFault: GPIO25, services.power[0].pinFault, io
Raspberry Pi Pico
RP2040 board from Raspberry Pi.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, io
Raspberry Pi Pico W
RP2040 board from Raspberry Pi with a WiFi chip.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, wifi
v2.15.1201
KittenBot NanoScript 1.0
A RP2040 board featuring a Jacdac connector, compatible with SMT-mounting.
Links: info firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO16, led.rgb[0].pin, io
led.rgb[1].pin: GPIO14, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO0, log.pinTX, io
services.power[0].pinEn: GPIO22, services.power[0].pinEn, io
services.power[0].pinFault: GPIO12, services.power[0].pinFault, io
services.power[0].pinPulse: GPIO8, services.power[0].pinPulse, io
services.power[0].pinLedPulse: GPIO13, services.power[0].pinLedPulse, io
services.power[0].pinUsbDetect: GPIO11, services.power[0].pinUsbDetect, io
MSR RP2040 Brain 124 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO16, led.rgb[0].pin, io
led.rgb[1].pin: GPIO14, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO0, log.pinTX, io
services.power[0].pinEn: GPIO22, services.power[0].pinEn, io
services.power[0].pinFault: GPIO12, services.power[0].pinFault, io
services.power[0].pinPulse: GPIO8, services.power[0].pinPulse, io
services.power[0].pinLedPulse: GPIO13, services.power[0].pinLedPulse, io
services.power[0].pinUsbDetect: GPIO11, services.power[0].pinUsbDetect, io
MSR Brain RP2040 59 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 11, 13, 15 (use setStatusLight to control)
- Serial logging on pin 2 at 115200 8N1
- Service: power (auto-start)
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO11, led.rgb[0].pin, io
led.rgb[1].pin: GPIO13, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO2, log.pinTX, io
services.power[0].pinEn: GPIO19, services.power[0].pinEn, io
services.power[0].pinFault: GPIO25, services.power[0].pinFault, io
Raspberry Pi Pico
RP2040 board from Raspberry Pi.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, io
Raspberry Pi Pico W
RP2040 board from Raspberry Pi with a WiFi chip.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, wifi
v2.15.1200
KittenBot NanoScript 1.0
A RP2040 board featuring a Jacdac connector, compatible with SMT-mounting.
Links: info firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO16, led.rgb[0].pin, io
led.rgb[1].pin: GPIO14, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO0, log.pinTX, io
services.power[0].pinEn: GPIO22, services.power[0].pinEn, io
services.power[0].pinFault: GPIO12, services.power[0].pinFault, io
services.power[0].pinPulse: GPIO8, services.power[0].pinPulse, io
services.power[0].pinLedPulse: GPIO13, services.power[0].pinLedPulse, io
services.power[0].pinUsbDetect: GPIO11, services.power[0].pinUsbDetect, io
MSR RP2040 Brain 124 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO16, led.rgb[0].pin, io
led.rgb[1].pin: GPIO14, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO0, log.pinTX, io
services.power[0].pinEn: GPIO22, services.power[0].pinEn, io
services.power[0].pinFault: GPIO12, services.power[0].pinFault, io
services.power[0].pinPulse: GPIO8, services.power[0].pinPulse, io
services.power[0].pinLedPulse: GPIO13, services.power[0].pinLedPulse, io
services.power[0].pinUsbDetect: GPIO11, services.power[0].pinUsbDetect, io
MSR Brain RP2040 59 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 11, 13, 15 (use setStatusLight to control)
- Serial logging on pin 2 at 115200 8N1
- Service: power (auto-start)
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO11, led.rgb[0].pin, io
led.rgb[1].pin: GPIO13, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO2, log.pinTX, io
services.power[0].pinEn: GPIO19, services.power[0].pinEn, io
services.power[0].pinFault: GPIO25, services.power[0].pinFault, io
Raspberry Pi Pico
RP2040 board from Raspberry Pi.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, io
Raspberry Pi Pico W
RP2040 board from Raspberry Pi with a WiFi chip.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, wifi
v2.15.100
MSR RP2040 Brain 124 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO16, led.rgb[0].pin, io
led.rgb[1].pin: GPIO14, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO0, log.pinTX, io
services.power[0].pinEn: GPIO22, services.power[0].pinEn, io
services.power[0].pinFault: GPIO12, services.power[0].pinFault, io
services.power[0].pinPulse: GPIO8, services.power[0].pinPulse, io
services.power[0].pinLedPulse: GPIO13, services.power[0].pinLedPulse, io
services.power[0].pinUsbDetect: GPIO11, services.power[0].pinUsbDetect, io
MSR Brain RP2040 59 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 11, 13, 15 (use setStatusLight to control)
- Serial logging on pin 2 at 115200 8N1
- Service: power (auto-start)
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO11, led.rgb[0].pin, io
led.rgb[1].pin: GPIO13, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO2, log.pinTX, io
services.power[0].pinEn: GPIO19, services.power[0].pinEn, io
services.power[0].pinFault: GPIO25, services.power[0].pinFault, io
Raspberry Pi Pico
RP2040 board from Raspberry Pi.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, io
Raspberry Pi Pico W
RP2040 board from Raspberry Pi with a WiFi chip.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, wifi
v2.14.0
MSR RP2040 Brain 124 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO16, led.rgb[0].pin, io
led.rgb[1].pin: GPIO14, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO0, log.pinTX, io
services.power[0].pinEn: GPIO22, services.power[0].pinEn, io
services.power[0].pinFault: GPIO12, services.power[0].pinFault, io
services.power[0].pinPulse: GPIO8, services.power[0].pinPulse, io
services.power[0].pinLedPulse: GPIO13, services.power[0].pinLedPulse, io
services.power[0].pinUsbDetect: GPIO11, services.power[0].pinUsbDetect, io
MSR Brain RP2040 59 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 11, 13, 15 (use setStatusLight to control)
- Serial logging on pin 2 at 115200 8N1
- Service: power (auto-start)
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
jacdac.pin: GPIO9, jacdac.pin, io
led.rgb[0].pin: GPIO11, led.rgb[0].pin, io
led.rgb[1].pin: GPIO13, led.rgb[1].pin, io
led.rgb[2].pin: GPIO15, led.rgb[2].pin, io
log.pinTX: GPIO2, log.pinTX, io
services.power[0].pinEn: GPIO19, services.power[0].pinEn, io
services.power[0].pinFault: GPIO25, services.power[0].pinFault, io
Raspberry Pi Pico
RP2040 board from Raspberry Pi.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, io
Raspberry Pi Pico W
RP2040 board from Raspberry Pi with a WiFi chip.
Links: info firmware
- custom LED (use setStatusLight to control)
GP0: GPIO0, io
GP1: GPIO1, io
GP2: GPIO2, io
GP3: GPIO3, io
GP4: GPIO4, io
GP5: GPIO5, io
GP6: GPIO6, io
GP7: GPIO7, io
GP8: GPIO8, io
GP9: GPIO9, io
GP10: GPIO10, io
GP11: GPIO11, io
GP12: GPIO12, io
GP13: GPIO13, io
GP14: GPIO14, io
GP15: GPIO15, io
GP16: GPIO16, io
GP17: GPIO17, io
GP18: GPIO18, io
GP19: GPIO19, io
GP20: GPIO20, io
GP21: GPIO21, io
GP22: GPIO22, io
GP26: GPIO26, io, analogIn
GP27: GPIO27, io, analogIn
GP28: GPIO28, io, analogIn
led.pin: GPIO25, led.pin, wifi
v2.13.300
MSR RP2040 Brain 124 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, io
led.rgb[0].pin: GPIO16, io
led.rgb[1].pin: GPIO14, io
led.rgb[2].pin: GPIO15, io
log.pinTX: GPIO0, io
services.power[0].pinEn: GPIO22, io
services.power[0].pinFault: GPIO12, io
services.power[0].pinPulse: GPIO8, io
services.power[0].pinLedPulse: GPIO13, io
services.power[0].pinUsbDetect: GPIO11, io
MSR Brain RP2040 59 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 11, 13, 15 (use setStatusLight to control)
- Serial logging on pin 2 at 115200 8N1
- Service: power (auto-start)
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
jacdac.pin: GPIO9, io
led.rgb[0].pin: GPIO11, io
led.rgb[1].pin: GPIO13, io
led.rgb[2].pin: GPIO15, io
log.pinTX: GPIO2, io
services.power[0].pinEn: GPIO19, io
services.power[0].pinFault: GPIO25, io
Raspberry Pi Pico
RP2040 board from Raspberry Pi.
Links: info firmware
- LED on pin 25 (use setStatusLight to control)
P0: GPIO0, io
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P8: GPIO8, io
P9: GPIO9, io
P10: GPIO10, io
P11: GPIO11, io
P12: GPIO12, io
P13: GPIO13, io
P14: GPIO14, io
P15: GPIO15, io
P16: GPIO16, io
P17: GPIO17, io
P18: GPIO18, io
P19: GPIO19, io
P20: GPIO20, io
P21: GPIO21, io
P22: GPIO22, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
led.pin: GPIO25, io
Raspberry Pi Pico W
RP2040 board from Raspberry Pi with a WiFi chip.
Links: info firmware
P0: GPIO0, io
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P8: GPIO8, io
P9: GPIO9, io
P10: GPIO10, io
P11: GPIO11, io
P12: GPIO12, io
P13: GPIO13, io
P14: GPIO14, io
P15: GPIO15, io
P16: GPIO16, io
P17: GPIO17, io
P18: GPIO18, io
P19: GPIO19, io
P20: GPIO20, io
P21: GPIO21, io
P22: GPIO22, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
v2.13.200
MSR RP2040 Brain 124 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, io
led.rgb[0].pin: GPIO16, io
led.rgb[1].pin: GPIO14, io
led.rgb[2].pin: GPIO15, io
log.pinTX: GPIO0, io
services.power[0].pinEn: GPIO22, io
services.power[0].pinFault: GPIO12, io
services.power[0].pinPulse: GPIO8, io
services.power[0].pinLedPulse: GPIO13, io
services.power[0].pinUsbDetect: GPIO11, io
MSR Brain RP2040 59 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 11, 13, 15 (use setStatusLight to control)
- Serial logging on pin 2 at 115200 8N1
- Service: power (auto-start)
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
jacdac.pin: GPIO9, io
led.rgb[0].pin: GPIO11, io
led.rgb[1].pin: GPIO13, io
led.rgb[2].pin: GPIO15, io
log.pinTX: GPIO2, io
services.power[0].pinEn: GPIO19, io
services.power[0].pinFault: GPIO25, io
Raspberry Pi Pico
RP2040 board from Raspberry Pi.
Links: info firmware
- LED on pin 25 (use setStatusLight to control)
P0: GPIO0, io
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P8: GPIO8, io
P9: GPIO9, io
P10: GPIO10, io
P11: GPIO11, io
P12: GPIO12, io
P13: GPIO13, io
P14: GPIO14, io
P15: GPIO15, io
P16: GPIO16, io
P17: GPIO17, io
P18: GPIO18, io
P19: GPIO19, io
P20: GPIO20, io
P21: GPIO21, io
P22: GPIO22, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
led.pin: GPIO25, io
Raspberry Pi Pico W
RP2040 board from Raspberry Pi with a WiFi chip.
Links: info firmware
P0: GPIO0, io
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P8: GPIO8, io
P9: GPIO9, io
P10: GPIO10, io
P11: GPIO11, io
P12: GPIO12, io
P13: GPIO13, io
P14: GPIO14, io
P15: GPIO15, io
P16: GPIO16, io
P17: GPIO17, io
P18: GPIO18, io
P19: GPIO19, io
P20: GPIO20, io
P21: GPIO21, io
P22: GPIO22, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
v2.13.0
MSR RP2040 Brain 124 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, io
led.rgb[0].pin: GPIO16, io
led.rgb[1].pin: GPIO14, io
led.rgb[2].pin: GPIO15, io
log.pinTX: GPIO0, io
services.power[0].pinEn: GPIO22, io
services.power[0].pinFault: GPIO12, io
services.power[0].pinPulse: GPIO8, io
services.power[0].pinLedPulse: GPIO13, io
services.power[0].pinUsbDetect: GPIO11, io
MSR Brain RP2040 59 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 11, 13, 15 (use setStatusLight to control)
- Serial logging on pin 2 at 115200 8N1
- Service: power (auto-start)
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
jacdac.pin: GPIO9, io
led.rgb[0].pin: GPIO11, io
led.rgb[1].pin: GPIO13, io
led.rgb[2].pin: GPIO15, io
log.pinTX: GPIO2, io
services.power[0].pinEn: GPIO19, io
services.power[0].pinFault: GPIO25, io
Raspberry Pi Pico
RP2040 board from Raspberry Pi.
Links: info firmware
- LED on pin 25 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P8: GPIO8, io
P9: GPIO9, io
P10: GPIO10, io
P11: GPIO11, io
P12: GPIO12, io
P13: GPIO13, io
P14: GPIO14, io
P15: GPIO15, io
P16: GPIO16, io
P17: GPIO17, io
P18: GPIO18, io
P19: GPIO19, io
P20: GPIO20, io
P21: GPIO21, io
P22: GPIO22, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
led.pin: GPIO25, io
log.pinTX: GPIO0, io
Raspberry Pi Pico W
RP2040 board from Raspberry Pi with a WiFi chip.
Links: info firmware
- Serial logging on pin 0 at 115200 8N1
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P8: GPIO8, io
P9: GPIO9, io
P10: GPIO10, io
P11: GPIO11, io
P12: GPIO12, io
P13: GPIO13, io
P14: GPIO14, io
P15: GPIO15, io
P16: GPIO16, io
P17: GPIO17, io
P18: GPIO18, io
P19: GPIO19, io
P20: GPIO20, io
P21: GPIO21, io
P22: GPIO22, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
log.pinTX: GPIO0, io
v2.12.100
MSR RP2040 Brain 124 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 16, 14, 15 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
- Service: power (auto-start)
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P10: GPIO10, io
P24: GPIO24, io
P25: GPIO25, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
P29: GPIO29, io, analogIn
jacdac.pin: GPIO9, io
led.rgb[0].pin: GPIO16, io
led.rgb[1].pin: GPIO14, io
led.rgb[2].pin: GPIO15, io
log.pinTX: GPIO0, io
services.power[0].pinEn: GPIO22, io
services.power[0].pinFault: GPIO12, io
services.power[0].pinPulse: GPIO8, io
services.power[0].pinLedPulse: GPIO13, io
services.power[0].pinUsbDetect: GPIO11, io
MSR Brain RP2040 59 v0.1
Prototype board
Links: firmware
- Jacdac on pin 9 using Jacdac connector
- RGB LED on pins 11, 13, 15 (use setStatusLight to control)
- Serial logging on pin 2 at 115200 8N1
- Service: power (auto-start)
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
jacdac.pin: GPIO9, io
led.rgb[0].pin: GPIO11, io
led.rgb[1].pin: GPIO13, io
led.rgb[2].pin: GPIO15, io
log.pinTX: GPIO2, io
services.power[0].pinEn: GPIO19, io
services.power[0].pinFault: GPIO25, io
Raspberry Pi Pico
RP2040 board from Raspberry Pi.
Links: info firmware
- LED on pin 25 (use setStatusLight to control)
- Serial logging on pin 0 at 115200 8N1
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P8: GPIO8, io
P9: GPIO9, io
P10: GPIO10, io
P11: GPIO11, io
P12: GPIO12, io
P13: GPIO13, io
P14: GPIO14, io
P15: GPIO15, io
P16: GPIO16, io
P17: GPIO17, io
P18: GPIO18, io
P19: GPIO19, io
P20: GPIO20, io
P21: GPIO21, io
P22: GPIO22, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
led.pin: GPIO25, io
log.pinTX: GPIO0, io
Raspberry Pi Pico W
RP2040 board from Raspberry Pi with a WiFi chip.
Links: info firmware
- Serial logging on pin 0 at 115200 8N1
P1: GPIO1, io
P2: GPIO2, io
P3: GPIO3, io
P4: GPIO4, io
P5: GPIO5, io
P6: GPIO6, io
P7: GPIO7, io
P8: GPIO8, io
P9: GPIO9, io
P10: GPIO10, io
P11: GPIO11, io
P12: GPIO12, io
P13: GPIO13, io
P14: GPIO14, io
P15: GPIO15, io
P16: GPIO16, io
P17: GPIO17, io
P18: GPIO18, io
P19: GPIO19, io
P20: GPIO20, io
P21: GPIO21, io
P22: GPIO22, io
P26: GPIO26, io, analogIn
P27: GPIO27, io, analogIn
P28: GPIO28, io, analogIn
log.pinTX: GPIO0, io